পরীক্ষা আর্কাইভ

৪৯তম বিসিএস ⎯ রসায়ন [৫৩১]

পরীক্ষা৪৯তম বিসিএস ⎯ রসায়ন [৫৩১]তারিখতারিখ অনির্ধারিতসময়30 minutes
মোট প্রশ্ন৫০
সিলেবাস
Exam - 14 Topics: Atropisomerism. UV, IR, Raman, ESR, 1H & 13C NMR, Mass Spectrometry- Principles and utility (application). [Source: Class - 10 and Relevant Books]
ঘনত্ব
উত্তর
উত্তরিতবর্তমানপুনরায় দেখুনঅসম্পূর্ণ

৪৯তম বিসিএস ⎯ রসায়ন [৫৩১]

৪৯তম বিসিএস ⎯ রসায়ন [৫৩১] · তারিখ অনির্ধারিত · ৫০ প্রশ্ন

.
Which region of the electromagnetic spectrum does UV radiation occupy? (তড়িৎ চৌম্বকীয় বর্ণালীর কোন অঞ্চলটি অতিবেগুনী রশ্মি দ্বারা প্রভাবিত হয়?)
  1. 10–400 nm
  2. 400–700 nm
  3. 700–1000 nm
  4. 1–10 nm
সঠিক উত্তর:
10–400 nm
উত্তর
সঠিক উত্তর:
10–400 nm
ব্যাখ্যা


So the right answer is A

Source: Any text book from HSC level.

.
Which of the following is a common application of UV rays? (নিচের কোনটি UV রশ্মির একটি সাধারণ প্রয়োগ?)
  1. MRI scanning (এমআরআই স্ক্যানিং)
  2. Fake note detection (জালনোট শনাক্তকরণ)
  3. Infrared imaging (ইনফ্রারেড ইমেজিং)
  4. X-ray diagnosis (এক্স-রে নির্ণয়)
সঠিক উত্তর:
Fake note detection (জালনোট শনাক্তকরণ)
উত্তর
সঠিক উত্তর:
Fake note detection (জালনোট শনাক্তকরণ)
ব্যাখ্যা

So the right answer is B

Source: Any text book from HSC level

.
In UV-Visible spectroscopy, which type of electronic transition is most commonly observed in organic molecules? (UV-দৃশ্যমান বর্ণালীতে, জৈব অণুতে কোন ধরণের ইলেকট্রনিক রূপান্তর সবচেয়ে বেশি পরিলক্ষিত হয়?)
  1.  π → π* transitions
  2. σ → σ* transitions only
  3. Nuclear spin transitions
  4. Vibrational transitions
সঠিক উত্তর:
 π → π* transitions
উত্তর
সঠিক উত্তর:
 π → π* transitions
ব্যাখ্যা

UV-দৃশ্যমান বর্ণালীতে, জৈব অণুতে সবচেয়ে বেশি পরিলক্ষিত হয় π → π* ইলেকট্রনিক রূপান্তর, যা অণুতে সংযোজিত ডাবল বন্ড বা অ্যারোমেটিক সিস্টেমের উপস্থিতির কারণে ঘটে। এই রূপান্তরটি একটি ইলেকট্রনের একটি পূর্ণ π বন্ডিং অবস্থা থেকে একটি অপূর্ণ π* অ্যান্টি-বন্ডিং অবস্থায় যাওয়ার মাধ্যমে ঘটে, যার ফলে UV-আলো শোষিত হয়। 

So the right answer is A

Source: Introduction of Spectroscopy, G.M. Barrow

.
Which region of the electromagnetic spectrum do infrared (IR) waves belong to? (ইনফ্রারেড তরঙ্গ তড়িৎ চৌম্বকীয় বর্ণালীর কোন অঞ্চলের অন্তর্গত?)
  1. Between ultraviolet and visible light 
  2. Between microwaves and visible light
  3. Between X-rays and gamma rays
  4. Between radio waves and microwaves
সঠিক উত্তর:
Between microwaves and visible light
উত্তর
সঠিক উত্তর:
Between microwaves and visible light
ব্যাখ্যা

So the right answer is B

Source: Any text book from HSC level

.
Which of the following is a common use of infrared radiation?(নিচের কোনটি ইনফ্রারেড বিকিরণের একটি সাধারণ ব্যবহার?)
  1. Sterilization of medical equipment (চিকিৎসা সরঞ্জাম জীবাণুমুক্তকরণ)
  2. Remote control (রিমোট কন্ট্রোল)
  3. Sterilization of drinking water (পানীয় জলের জীবাণুমুক্তকরণ)
  4. Data storage in optical discs (অপটিক্যাল ডিস্কে ডেটা স্টোরেজ)
সঠিক উত্তর:
Remote control (রিমোট কন্ট্রোল)
উত্তর
সঠিক উত্তর:
Remote control (রিমোট কন্ট্রোল)
ব্যাখ্যা

So the right answer is B

Source: Any text book from HSC level

.
Which of the following does not belong to the band spectrum? (নিচের কোনটি আণবিক বর্ণালির অন্তর্গত নয়?)
  1. Raman Spectra
  2. NMR Spectra
  3. ESR Spectra
  4. Fluorescence
সঠিক উত্তর:
Fluorescence
উত্তর
সঠিক উত্তর:
Fluorescence
ব্যাখ্যা

Fluorescence একটি নিরবিচ্ছিন্ন বর্ণালি। আণবিক বর্ণালি কখনো নিরবিচ্ছিন্ন হতে পারে না।

So the right answer is D
Source: Any text book from HSC level

.
The Raman effect is based on:
  1. Elastic scattering of light (আলোর স্থিতিস্থাপক বিচ্ছুরণ)
  2. Inelastic scattering of light (আলোর অস্থিতিস্থাপক বিচ্ছুরণ)
  3. Reflection of light (আলোর প্রতিফলন)
  4. Refraction of light (আলোর প্রতিসরণ)
সঠিক উত্তর:
Inelastic scattering of light (আলোর অস্থিতিস্থাপক বিচ্ছুরণ)
উত্তর
সঠিক উত্তর:
Inelastic scattering of light (আলোর অস্থিতিস্থাপক বিচ্ছুরণ)
ব্যাখ্যা

The Raman effect is based on the phenomenon of inelastic light scattering, where light photons interact with molecules, causing a change in their vibrational or rotational energy states and a corresponding shift in the frequency.

So the right answer is B
Source: Introduction of Spectroscopy, G.M. Barrow.

.
According to the classical theory of Raman scattering, the effect arises due to: (সনাতনী মতবাদ অনুসারে, Raman scattering যে কারণে উদ্ভূত হয়:)
  1. Energy quantization of vibrational states (কম্পন অবস্থার শক্তি)
  2. Modulation of molecular polarizability by vibrations or rotations (কম্পন বা ঘূর্ণনের মাধ্যমে আণবিক মেরুকরণযোগ্যতার মড্যুলেশন)
  3. Emission of photons due to electronic transitions (ইলেকট্রনিক ট্রানজিশনের কারণে ফোটনের নির্গমন)
  4. Conservation of angular momentum only (শুধুমাত্র কৌণিক ভরবেগ সংরক্ষণ)
সঠিক উত্তর:
Modulation of molecular polarizability by vibrations or rotations (কম্পন বা ঘূর্ণনের মাধ্যমে আণবিক মেরুকরণযোগ্যতার মড্যুলেশন)
উত্তর
সঠিক উত্তর:
Modulation of molecular polarizability by vibrations or rotations (কম্পন বা ঘূর্ণনের মাধ্যমে আণবিক মেরুকরণযোগ্যতার মড্যুলেশন)
ব্যাখ্যা

Raman scattering তখন ঘটে যখন আলো একটি অণুতে প্রবেশ করে এবং রাসায়নিক বন্ধনের ইলেকট্রন মেঘের সাথে মিথস্ক্রিয়া করে, যার ফলে অণুতে তড়িৎ চৌম্বকীয় ক্ষেত্র তৈরি হয় যার ফলে কম্পন এবং ফ্রিকোয়েন্সি শিফটের বিকৃতি ঘটে। আপতিত ফোটন ইলেকট্রনকে ভার্চুয়াল অবস্থায় উত্তেজিত করে ও আণবিক মেরুকরণ ঘটে।

So the right answer is B
Source: Introduction of Spectroscopy, G.M. Barrow.

.
In Electron Spin Resonance (ESR), the g-factor relates to: (ইলেক্ট্রন স্পিন রেজোন্যান্স (ESR) -এ, g-ফ্যাক্টরটি নিচের কোন বিষয়টির সাথে সম্পর্কিত:)
  1. Ratio of nuclear magnetic moment to angular momentum
  2. Ratio of electronic magnetic moment to angular momentum
  3. The probability of photon absorption in resonance
  4. The energy gap between singlet and triplet states
সঠিক উত্তর:
Ratio of electronic magnetic moment to angular momentum
উত্তর
সঠিক উত্তর:
Ratio of electronic magnetic moment to angular momentum
ব্যাখ্যা

The g-factor is mainly ratio of electronic magnetic moment to angular momentum. It can be determined using the ESR equation: g=hν/μBBz
where:      
h is Planck's constant
ν (nu) is the microwave frequency at which resonance occurs
 μB is the Bohr magneton, a fundamental constant
 Bz is the strength of the external magnetic field

So the right answer is B
Source: Introduction of Spectroscopy, G.M. Barrow.

১০.
For a free electron, the g-factor in ESR is approximately:
  1. 1.000
  2. 2.0023
  3. 3.141
  4. 0.707
সঠিক উত্তর:
2.0023
উত্তর
সঠিক উত্তর:
2.0023
ব্যাখ্যা

For a free electron, the g-factor (g) in Electron Spin Resonance (ESR) is approximately 2.0023. This value is a constant for an isolated electron.

So the right answer is B
Source: Introduction of Spectroscopy, G.M. Barrow.

১১.
Larmor precession describes:
  1. The oscillation of electrons between energy states in an atom
  2. The precession of a magnetic moment around an external magnetic field
  3. The quantization of orbital angular momentum in atoms
  4. The rotation of light polarization in a medium
সঠিক উত্তর:
The precession of a magnetic moment around an external magnetic field
উত্তর
সঠিক উত্তর:
The precession of a magnetic moment around an external magnetic field
ব্যাখ্যা

Larmor precession describes the spinning motion of a magnetic moment, such as that of a nucleus or electron, as it rotates in a conical path around an external magnetic field. This precessional motion is driven by a torque exerted by the magnetic field on the magnetic moment, and the angular frequency of this precession is known as the Larmor frequency.

(Larmor precession বলতে একটি চৌম্বকীয় ঘূর্ণন গতি বোঝায়, যেমন একটি নিউক্লিয়াস বা ইলেকট্রন, যখন এটি একটি বহিরাগত চৌম্বক ক্ষেত্রের চারপাশে একটি কনিক্যাল পথে ঘোরে। এই প্রিসেশনাল গতি চৌম্বকীয় ভ্রামকের  উপর চৌম্বক ক্ষেত্র দ্বারা প্রেরিত একটি টর্ক দ্বারা চালিত হয় এবং এই প্রিসেশনের কৌণিক কম্পাঙ্ক লারমোর ফ্রিকোয়েন্সি নামে পরিচিত।)

So the right answer is B
Source: Introduction of Spectroscopy, G.M. Barrow.

১২.
IR absorption arises primarily from transitions in: (IR শোষণ মূলত কোন পরিবর্তন থেকে আসে?)
  1. Electronic levels
  2. Nuclear spin levels
  3. Molecular vibrations 
  4. Translational motion
সঠিক উত্তর:
Molecular vibrations 
উত্তর
সঠিক উত্তর:
Molecular vibrations 
ব্যাখ্যা

Explanation (EN): IR probes vibrational energy spacings governed by bond strength and masses. Selection rule requires a change in dipole moment. (IR-এ কম্পনীয় স্তরগুলোর পরিবর্তন ধরা হয়; বন্ধনের শক্তি ও ভরের ওপর নির্ভর করে। সিলেকশন রুলে ডাইপোলের পরিবর্তন লাগবে।)

So the right answer is C
Source: Introduction of Spectroscopy, G.M. Barrow

১৩.
Which stretching frequency is typically highest? (কোনটির স্ট্রেচিং ফ্রিকোয়েন্সি সাধারণত সবচেয়ে বেশি?)
  1. C–Cl
  2. C≡C
  3. C=C
  4. C–H 
সঠিক উত্তর:
C≡C
উত্তর
সঠিক উত্তর:
C≡C
ব্যাখ্যা

Explanation: Triple bonds are strongest and vibrate at higher wavenumbers (~2100–2300 cm⁻¹). Single bonds appear at lower values.( ত্রিবন্ধন শক্তিশালী হওয়ায় ২১০০–২৩‍০০ cm⁻¹ অঞ্চলে দেখা যায়। একক বন্ধনগুলো কম তরঙ্গসংখ্যায় থাকে।

So the right answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

১৪.
Hydrogen-bonded O–H in alcohols appears as:
  1. Sharp peak at 3650 cm⁻¹
  2. Broad band around 3200–3500 cm⁻¹
  3. Multiple peaks near 2200 cm⁻¹
  4. No absorption
সঠিক উত্তর:
Broad band around 3200–3500 cm⁻¹
উত্তর
সঠিক উত্তর:
Broad band around 3200–3500 cm⁻¹
ব্যাখ্যা

Explanation: H-bonding produces a broad, smooth envelope from varied environments. Free O–H is sharp at 3200–3500 cm⁻¹. (H-বন্ডের কারণে পরিবেশভেদে বিস্তৃত ব্রড ব্যান্ড হয়। মুক্ত O–H হলে 3200–3500 cm⁻¹  তীক্ষ্ণ পীক দেখা যায়।)

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

১৫.
Which pair helps distinguish aldehyde from ketone in IR?
(IR-এ অ্যালডিহাইড ও কিটোন আলাদা করতে কোন জুটি সহায়ক?)
  1. C=O band only
  2. C=O band + aldehydic C–H 
  3. O–H band
  4. C≡N band
সঠিক উত্তর:
C=O band + aldehydic C–H 
উত্তর
সঠিক উত্তর:
C=O band + aldehydic C–H 
ব্যাখ্যা

Explanation (EN): Aldehydes show a characteristic weak doublet near 2720–2820 cm⁻¹ in addition to C=O. Ketones lack this formyl C–H stretch.
ব্যাখ্যা (BN): অ্যালডিহাইডে C=O ছাড়াও ২৭২০–২৮২০ cm⁻¹-এ দুর্বল ডাবলেট থাকে—ফর্মাইল C–H। কিটোনে এটি থাকে না।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

১৬.
The ESR signal intensity, which is proportional to electron density, depends directly on:
  1. Number of unpaired electrons in the sample
  2. Temperature and Boltzmann distribution
  3. Microwave power and resonance condition
  4. All of the above
সঠিক উত্তর:
All of the above
উত্তর
সঠিক উত্তর:
All of the above
ব্যাখ্যা

Explanation (EN):
ESR signal amplitude is proportional to the number of spins that can absorb—so it grows with the number of unpaired electrons in the sample. The population difference between the Zeeman levels follows the Boltzmann distribution. Therefore, all three factors directly control ESR intensity.

ব্যাখ্যা (BN):
ESR সংকেতের মাত্রা শোষণে অংশ নিতে সক্ষম বিজোড় ইলেকট্রনের সংখ্যা যত বেশি, তত বড় হয়। জিম্যান স্তরগুলোর জনসংখ্যা পার্থক্য বোল্টজম্যান বণ্টন মেনে চলে। তাই তাপমাত্রা কমালে সংকেত বাড়ে। এছাড়া রেজোন্যান্স শর্ত পূরণ হতে হবে এবং মাইক্রোওয়েভ পাওয়ার ঠিক মাত্রায় থাকতে হবে—অতিরিক্ত হলে স্যাচুরেশন হয় ও পিক ছোটে, কম হলে লাইন দুর্বল থাকে। তাই উল্লিখিত তিনটি বিষয়ই সরাসরি ESR তীব্রতা নির্ধারণ করে।

So the answer is D
Source: Introduction of Spectroscopy, G.M. Barrow

১৭.
The “fingerprint region” in IR lies roughly at:
(IR-এর “ফিঙ্গারপ্রিন্ট অঞ্চল” প্রায় কোথায়?))
  1. 4000–2500 cm⁻¹
  2. 2500–2000 cm⁻¹
  3. 1500–500 cm⁻¹
  4. 100–10 cm⁻¹
সঠিক উত্তর:
1500–500 cm⁻¹
উত্তর
সঠিক উত্তর:
1500–500 cm⁻¹
ব্যাখ্যা

Explanation: Complex bending and skeletal vibrations provide unique patterns useful for identification. Even isomers often differ there.
ব্যাখ্যা:  বিভিন্ন বাঁক/স্কেলেটাল কম্পন-এর জটিল নকশা এখানে থাকে—পরিচয়ে খুব কার্যকর এবং আইসমারও আলাদা দেখা যায়।

So the answer is C
Source: Introduction of Spectroscopy, G.M. Barrow

১৮.
Raman scattering differs from IR in selection rule because it requires:
(সিলেকশন রুলে রমন IR থেকে আলাদা, কারণ সেখানে দরকার—)
  1. Change in dipole moment
  2.  Change in polarizability during vibration
  3. Nuclear spin flip
  4. Permanent dipole
সঠিক উত্তর:
 Change in polarizability during vibration
উত্তর
সঠিক উত্তর:
 Change in polarizability during vibration
ব্যাখ্যা

Explanation: Raman-active modes modulate polarizability, not dipole. Thus IR-silent symmetric stretches can be Raman-strong.
ব্যাখ্যা: রমনে পোলারাইজেবিলিটি পরিবর্তন দরকার; ডাইপোল নয়। তাই IR-অকার্যকর সিমেট্রিক স্ট্রেচও রমনে শক্তিশালী হতে পারে।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

১৯.
Which laser line is commonly used for Raman excitation?
(রমানে কোন লেজার রেখা প্রায়ই ব্যবহৃত হয়?)
  1. 589 nm 
  2. 532 nm 
  3. 10.6 µm 
  4. 365 nm 
সঠিক উত্তর:
532 nm 
উত্তর
সঠিক উত্তর:
532 nm 
ব্যাখ্যা

Explanation (EN): 532 and 785 nm offer strong excitation with manageable fluorescence background. Choice depends on sample.
ব্যাখ্যা (BN): ৫৩২ ও ৭৮৫ nm লেজার সাধারণ—উত্তেজনা ভালো, ফ্লুরোসেন্সও নিয়ন্ত্রিত। নমুনা অনুযায়ী বেছে নেওয়া হয়।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

২০.
Why is Raman complementary to IR for aqueous samples?
(জলীয় নমুনায় রমন IR-এর পরিপূরক কেন?))
  1. Water absorbs strongly in Raman
  2. Water is weak in Raman but strong in IR, reducing interference
  3. Both are equally absorbed
  4. Raman needs vacuum
সঠিক উত্তর:
Water is weak in Raman but strong in IR, reducing interference
উত্তর
সঠিক উত্তর:
Water is weak in Raman but strong in IR, reducing interference
ব্যাখ্যা

Explanation (EN): Water has weak Raman scattering allowing solute bands to stand out, whereas IR suffers from strong water absorption.
ব্যাখ্যা (BN): পানিতে  রমন দুর্বল হওয়ায় দ্রবীভূত পদার্থের ব্যান্ড স্পষ্ট থাকে; IR-এর সময় পানি নিজেই প্রবল শোষণ করে বাধা দেয়।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

২১.
What is the fundamental principle of infrared (IR) spectroscopy? (IR স্পেকট্রোস্কোপির মূলনীতি কোনটি?)
  1. Absorption of IR radiation causes electronic transitions (IR বিকিরণের শোষণ ইলেকট্রনিক রূপান্তর ঘটায়)
  2. Absorption of IR radiation excites nuclei to a higher energy level (IR বিকিরণের শোষণ nuclei কে  উত্তেজিত করে উচ্চ  স্তরে প্রেরণ করে)
  3. Absorption of IR radiation causes vibrational transitions in molecules (IR বিকিরণের শোষণ অণুতে কম্পনের পরিবর্তন ঘটায়)
  4. Emission of visible light by excited molecules (উত্তেজিত অণু থেকে দৃশ্যমান আলোর বিকিরণ ঘটে)
সঠিক উত্তর:
Absorption of IR radiation causes vibrational transitions in molecules (IR বিকিরণের শোষণ অণুতে কম্পনের পরিবর্তন ঘটায়)
উত্তর
সঠিক উত্তর:
Absorption of IR radiation causes vibrational transitions in molecules (IR বিকিরণের শোষণ অণুতে কম্পনের পরিবর্তন ঘটায়)
ব্যাখ্যা

IR স্পেকট্রোস্কোপির মূলনীতি হলো, অণুগুলো তাদের আণবিক বন্ধনের নির্দিষ্ট কম্পনের সাথে সামঞ্জস্যপূর্ণ ফ্রিকোয়েন্সির ইনফ্রারেড আলো শোষণ করে। এই শোষণের মাধ্যমে অণুগুলির মধ্যে থাকা বন্ধনগুলি বিভিন্নভাবে কম্পিত হয়। নমুনাটি যখন ইনফ্রারেড আলোর সংস্পর্শে আসে, তখন নমুনাটি নির্দিষ্ট ফ্রিকোয়েন্সির আলো শোষণ করে। শোষিত শক্তির পরিমাণ পরিমাপ করে একটি নির্দিষ্ট functional group সনাক্ত করা যায়। 

So the right answer is C

Source: Any text book from HSC level/ Introduction of Spectroscopy, G.M. Barrow

২২.
Which type of molecular bonds are most easily studied using IR spectroscopy? (IR স্পেকট্রোস্কোপি ব্যবহার করে কোন ধরণের রাসায়নিক বন্ধন সবচেয়ে সহজে নির্ণয় করা যায়?)
  1. Ionic
  2. Metallic
  3. Covalent
  4. Hydrogen bond
সঠিক উত্তর:
Covalent
উত্তর
সঠিক উত্তর:
Covalent
ব্যাখ্যা

IR স্পেকট্রোস্কোপি ব্যবহার করে  সমযোজী বন্ধন (Covalent- ‍একক বন্ধন/ দ্বি বন্ধন/ ত্রিবন্ধন)   সবচেয়ে সহজে নির্ণয় করা যায়। যেমন C-H, C=O, O-H ইত্যাদি

So the right answer is C

Source: Any text book from HSC level/ Introduction of Spectroscopy, G.M. Barrow

২৩.
ESR detects transitions between:
(ESR-এ কোন স্তরের পরিবর্তন ধরা হয়?)
  1. Nuclear spin states
  2.  Unpaired electron spin states in a magnetic field
  3. Vibrational states
  4. Rotational states only
সঠিক উত্তর:
 Unpaired electron spin states in a magnetic field
উত্তর
সঠিক উত্তর:
 Unpaired electron spin states in a magnetic field
ব্যাখ্যা

Explanation (EN): Microwaves induce Δms = ±1 transitions of unpaired electrons. It thus requires paramagnetic species.
ব্যাখ্যা (BN): মাইক্রোওয়েভে বিজোড় ইলেকট্রনের স্পিন স্তর বদলায়, তাই প্যারাম্যাগনেটিক যৌগ দরকার।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

২৪.
The g-value in ESR is analogous to what in NMR?
(ESR-এর g-মান NMR-এ কিসের সমতুল্য?)
  1. T₁
  2. Chemical shift
  3. J-coupling
  4. none
সঠিক উত্তর:
Chemical shift
উত্তর
সঠিক উত্তর:
Chemical shift
ব্যাখ্যা

Explanation: Deviations of g from electronic environment and spin-orbit effects, related to NMR chemical shift for nuclei.
ব্যাখ্যা: g-মান পরিবেশ/স্পিন-কক্ষপথ প্রভাবের ইঙ্গিত দেয়—যেমন NMR-এ কেমিক্যাল শিফট নিউক্লিয়াসের পরিবেশ দেখায়।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

২৫.
ESR hyperfine splitting originates from interaction with:
(ESR-এ হাইপারফাইন বিভাজন কার সাথে মিথস্ক্রিয়া থেকে হয়?)
  1. Vibrational modes
  2. Magnetic nuclei 
  3. Photons
  4. Lattice phonons only
সঠিক উত্তর:
Magnetic nuclei 
উত্তর
সঠিক উত্তর:
Magnetic nuclei 
ব্যাখ্যা

Explanation (EN): Electron spin couples to nearby nuclear spins (I≠0), producing multiplets (e.g., n equivalent protons → n+1 lines).
ব্যাখ্যা (BN): বিজোড় ইলেকট্রন কাছের চৌম্বক নিউক্লিয়াসের সাথে কাপলিং করে মাল্টিপ্লেট দেয়; n সমতুল্য প্রোটনে n+1 লাইন হয়।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

২৬.
Which of the following is a major application of Raman spectroscopy? (নিচের কোনটি রমন বর্ণালীমিতির প্রধান ব্যবহার?)
  1. Determining electron spin resonance (ইলেকট্রন স্পিন অনুরণন নির্ণয়)
  2. Measuring rotational and vibrational spectra of molecules (অণুর ঘূর্ণন এবং কম্পন বর্ণালী পরিমাপ করা)
  3. Identifying nuclear magnetic moments (পারমাণবিক magnetic moment নির্ণয়)
  4. Calculating refractive indices of crystals only (শুধুমাত্র স্ফটিকের প্রতিসরাঙ্ক গণনা করা)
সঠিক উত্তর:
Measuring rotational and vibrational spectra of molecules (অণুর ঘূর্ণন এবং কম্পন বর্ণালী পরিমাপ করা)
উত্তর
সঠিক উত্তর:
Measuring rotational and vibrational spectra of molecules (অণুর ঘূর্ণন এবং কম্পন বর্ণালী পরিমাপ করা)
ব্যাখ্যা

রমন বর্ণালীমিতির প্রধান ব্যবহারগুলি হল বিভিন্ন পদার্থের কম্পন বর্ণালীর সাহায্যে রাসায়নিক বন্ধন কম্পন বর্ণালী সনাক্তকরণ ও প্রমাণীকরণ, ওষুধ শিল্পে পণ্যের গুণমান নিয়ন্ত্রণ ও যাচাইকরণ, চিকিৎসা ক্ষেত্রে রোগ নির্ণয় এবং রাসায়নিক যৌগ ও ন্যানোবস্তুর গঠন বিশ্লেষণ করা। 

So the right answer is B

Source: Introduction of Spectroscopy, G.M. Barrow

২৭.
In ESR spectroscopy, the electron density of a paramagnetic sample can be determined from: (ESR স্পেকট্রোস্কোপিতে, একটি প্যারাম্যাগনেটিক নমুনার ইলেকট্রন ঘনত্ব নির্ণয় করা যেতে পারে)
  1. The resonance magnetic field only
  2. The g-factor shift relative to the free electron
  3. The double integral of the first derivative ESR absorption curve
  4. The linewidth of the ESR signal
সঠিক উত্তর:
The double integral of the first derivative ESR absorption curve
উত্তর
সঠিক উত্তর:
The double integral of the first derivative ESR absorption curve
ব্যাখ্যা

In ESR spectroscopy, the electron density  can be determined from the signal intensity of the ESR spectrum, often after a double integration of the peak area, providing information about the number of unpaired electrons present in the sample. 

So the right answer is C

Source: Introduction of Spectroscopy, G.M. Barrow

২৮.
Spin–spin splitting follows the n+1 rule when:
(n+1 নিয়মে স্প্লিটিং দেখা যায় কখন?)
  1. Coupled nuclei have I=0
  2. n equivalent neighboring protons couple 
  3. Strong coupling regime
  4. Exchange is very fast
সঠিক উত্তর:
n equivalent neighboring protons couple 
উত্তর
সঠিক উত্তর:
n equivalent neighboring protons couple 
ব্যাখ্যা

Explanation (EN): For first-order systems, n equivalent neighbors split the signal into n+1 lines with Pascal intensities. Strong coupling or exchange alters patterns.
ব্যাখ্যা (BN): প্রথম-ক্রমের ক্ষেত্রে n সমতুল্য প্রতিবেশী থাকলে (n+1) লাইনে ভাগ হয় এবং প্যাসকাল অনুপাত মেনে চলে। শক্ত কাপলিং/এক্সচেঞ্জ হলে নিয়ম ভেঙে যায়।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

২৯.
Tetramethylsilane (TMS) is used because it:
(TMS ব্যবহার করা হয় কেন?)
  1. Is paramagnetic
  2. Gives a single sharp signal at 0 ppm and is inert/volatile
  3. Strongly hydrogen bonds
  4. Dissolves only in water
সঠিক উত্তর:
Gives a single sharp signal at 0 ppm and is inert/volatile
উত্তর
সঠিক উত্তর:
Gives a single sharp signal at 0 ppm and is inert/volatile
ব্যাখ্যা

Explanation (EN): TMS is highly shielded and chemically unreactive, serving as a universal internal reference.
ব্যাখ্যা (BN): TMS-এ প্রোটন অত্যন্ত শিল্ডেড, রাসায়নিকভাবে নিষ্ক্রিয়; তাই ০ ppm-এ একটি তীক্ষ্ণ রেফারেন্স সিগনাল দেয়।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

৩০.
DEPT-135 ¹³C NMR displays:
(DEPT-১৩৫ ¹³C NMR কী দেখায়?)
  1. Only quaternary carbons
  2.  CH and CH₃ positive; CH₂ negative; quaternary absent
  3. All carbons equally
  4. Only carbonyls
সঠিক উত্তর:
 CH and CH₃ positive; CH₂ negative; quaternary absent
উত্তর
সঠিক উত্তর:
 CH and CH₃ positive; CH₂ negative; quaternary absent
ব্যাখ্যা

Explanation (EN): DEPT editing phase-discriminates signals by attached protons, aiding assignment of carbon types.
ব্যাখ্যা (BN): DEPT-১৩৫-এ সংযুক্ত প্রোটনের ভিত্তিতে ফেজ পাল্টে CH/CH₃ (+), CH₂ (–) এবং চিনতে সুবিধা হয়।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

৩১.
A singlet at ~9–10 ppm in ¹H NMR typically indicates:
(¹H NMR-এ ~৯–১০ ppm-এ সিংলেট সাধারণত কী নির্দেশ করে?)
  1. Aromatic CH
  2. Aldehydic –CHO proton
  3. Carboxylic OH only
  4. Vinyl CH₂
সঠিক উত্তর:
Aldehydic –CHO proton
উত্তর
সঠিক উত্তর:
Aldehydic –CHO proton
ব্যাখ্যা

Explanation (EN): Aldehydic protons are strongly deshielded and usually do not couple much, giving a singlet around 9–10 ppm.
ব্যাখ্যা (BN): অ্যালডিহাইডের H খুব ডিশিল্ডেড এবং সাধারণত কম কাপলিং করে, তাই ৯–১০ ppm-এ সিংলেট দেখা যায়।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

৩২.
¹³C NMR spectra are typically recorded with proton decoupling because it:
(¹³C NMR-এ প্রোটন ডিকাপলিং করা হয় কেন?)
  1. Reduces sensitivity
  2. Collapses multiplets to singlets and enhances signal 
  3. Prevents relaxation
  4. Avoids chemical shift
সঠিক উত্তর:
Collapses multiplets to singlets and enhances signal 
উত্তর
সঠিক উত্তর:
Collapses multiplets to singlets and enhances signal 
ব্যাখ্যা

Explanation (EN): Broadband decoupling removes ¹H–¹³C couplings, simplifying spectra and increasing intensity via NOE. (Nuclear Overhauser Effect)
ব্যাখ্যা (BN): ব্রডব্যান্ড ডিকাপলিং-এ ¹H–¹³C কাপলিং উঠে যায়—সিংলেট হয় ও NOE-তে সিগনাল শক্তি বাড়ে।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

৩৩.
Which analyzer separates ions by m/z using time to traverse a field-free tube?
(কোন অ্যানালাইজার m/z ভেদে সময়-ভিত্তিকভাবে আয়ন আলাদা করে?)
  1. Quadrupole
  2. Ion trap
  3.  Time-of-flight
  4. Magnetic sector
সঠিক উত্তর:
 Time-of-flight
উত্তর
সঠিক উত্তর:
 Time-of-flight
ব্যাখ্যা

Explanation (EN): TOF (Time-of-flight) measures flight time after pulsed acceleration; lighter ions arrive earlier. It provides wide mass range and fast acquisition.
ব্যাখ্যা (BN): TOF-এ পালসড অ্যাক্সিলারেশনের পর উড়ান সময় মাপা হয়—হালকা আয়ন আগে পৌঁছায়। ভর-পরিসর বড় ও দ্রুত ডেটা মেলে।

So the answer is C
Source: Introduction of Spectroscopy, G.M. Barrow

৩৪.
Which transformation racemizes many atropisomers most rapidly?
(কোন প্রক্রিয়ায় অনেক অ্যাট্রোপিআইসমার দ্রুত রেসেমাইজড হয়?)
  1. Photolysis of side chain
  2. Thermal rotation about the aryl–aryl bond
  3. Aryl nitration
  4. Metalation at para position
সঠিক উত্তর:
Thermal rotation about the aryl–aryl bond
উত্তর
সঠিক উত্তর:
Thermal rotation about the aryl–aryl bond
ব্যাখ্যা

Explanation (EN): Heating lowers population bias by enabling rotation across the biaryl bond. If the barrier is crossed, P and M interconvert.
ব্যাখ্যা (BN): তাপ দিলে বাইএরিল বন্ধনে ঘূর্ণন সম্ভব হয় এবং P ↔ M একে অপরেতে রূপান্তরিত হয়। ফলে রেসেমাইজেশন ঘটে।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

৩৫.
The term chromophore refers to:
(ক্রোমোফোর বলতে বোঝায়—)
  1. Any heteroatom
  2. The light-absorbing part responsible for an electronic transition
  3. Solvent molecules
  4. Detector window
সঠিক উত্তর:
The light-absorbing part responsible for an electronic transition
উত্তর
সঠিক উত্তর:
The light-absorbing part responsible for an electronic transition
ব্যাখ্যা

Explanation (EN): Chromophores such as C=C, C=O, and aromatic rings produce characteristic UV-Vis bands. Their environment modulates λmax and ε.
ব্যাখ্যা (BN): C=C, C=O, অ্যারোম্যাটিক রিং ইত্যাদি ক্রোমোফোর UV-Vis ব্যান্ড তৈরি করে; পরিবেশের প্রভাবে λmax ও ε বদলে যায়।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

৩৬.
Auxochromes (–OH, –NR₂) generally cause:
(অক্সোক্রোম (–OH, –NR₂) সাধারণত কী ঘটায়?)
  1. Hypsochromic & hypochromic always
  2.  Bathochromic shift and often hyperchromic effect
  3. Only broadening
  4. No change
সঠিক উত্তর:
 Bathochromic shift and often hyperchromic effect
উত্তর
সঠিক উত্তর:
 Bathochromic shift and often hyperchromic effect
ব্যাখ্যা

Explanation (EN): Electron donation/withdrawal via resonance lowers transition energy and increases intensity. The exact effect depends on position and conjugation.
ব্যাখ্যা (BN): রেজোন্যান্সে ইলেকট্রন দান/আকর্ষণ ট্রানজিশনের শক্তি কমায় ও তীব্রতা বাড়ায়; অবস্থান-সংযোজনের ওপর নির্ভর করে।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

৩৭.
A solvent of higher polarity often shifts the n→π band:*
  1. To shorter λ (blue)
  2. To longer λ (red)
  3. To lower ε only
  4. Split the band
সঠিক উত্তর:
To longer λ (red)
উত্তর
সঠিক উত্তর:
To longer λ (red)
ব্যাখ্যা

Explanation: Polar solvents stabilize the ground state less than the excited n→π state, leading to a bathochromic shift. π→π* can show the opposite.
ব্যাখ্যা (BN): পোলার  দ্রাবকে উত্তেজিত n→π* অবস্থা তুলনামূলক বেশি স্থিতিশীল হয়—λmax বড় হয়; π→π* অনেক সময় উল্টো সরে।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

৩৮.
Which detector is widely used in modern UV-Vis instruments?
(আধুনিক UV-Vis যন্ত্রে কোন ডিটেক্টর বেশি ব্যবহৃত?)
  1. Photographic plate
  2. Photodiode array 
  3. Bolometer
  4. Ionization chamber
সঠিক উত্তর:
Photodiode array 
উত্তর
সঠিক উত্তর:
Photodiode array 
ব্যাখ্যা

Explanation (EN): PDAs (Photodiode Array) allow rapid acquisition of full spectra; PMTs offer high sensitivity for scanning instruments. Choice depends on design.
ব্যাখ্যা (BN): PDA-তে পুরো স্পেক্ট্রা দ্রুত ধরা যায়; PMT স্ক্যানিং-এ উচ্চ সংবেদনশীল। যন্ত্র নকশা অনুযায়ী নির্বাচন করা হয়।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

৩৯.
Downfield aromatic protons typically resonate at:
  1. 0–1 ppm
  2. 1–2 ppm
  3. 6–8 ppm
  4. 10–12 ppm
সঠিক উত্তর:
6–8 ppm
উত্তর
সঠিক উত্তর:
6–8 ppm
ব্যাখ্যা

Explanation: Ring current deshields aromatic protons, placing them near 7 ppm. Substituents shift positions modestly.
ব্যাখ্যা: রিং-কারেন্ট ডিশিল্ডিং করায় অ্যারোম্যাটিক H প্রায় ৭ ppm-এ থাকে; প্রতিস্থাপক সামান্য সরায়।

So the answer is C
Source: Introduction of Spectroscopy, G.M. Barrow

৪০.
COSY reveals:
  1. Carbon connectivity
  2. Scalar-coupled protons 
  3. Through-space correlations
  4. Only quaternary carbons
সঠিক উত্তর:
Scalar-coupled protons 
উত্তর
সঠিক উত্তর:
Scalar-coupled protons 
ব্যাখ্যা

Explanation:
COSY= Correlation  Spectroscopy
Off-diagonal cross-peaks show which protons couple, grouping them into fragments. It helps map proton networks.
ব্যাখ্যা (BN): অফ-ডায়াগোনাল ক্রস-পীক-এ কোন H কোন H-এর সাথে কাপল্ড বোঝা যায়—ফলে স্পিন-সিস্টেম গঠন হয়।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

৪১.
Base peak in a mass spectrum is:
(মাস স্পেকট্রামে বেস পীক বলতে বোঝায়—)
  1. Molecular ion always
  2. The most intense peak set to 100%
  3. The lowest m/z peak
  4. Calibration peak
সঠিক উত্তর:
The most intense peak set to 100%
উত্তর
সঠিক উত্তর:
The most intense peak set to 100%
ব্যাখ্যা

Explanation (EN): Intensity is normalized to the base peak; it may be a fragment or M⁺· depending on stability.
ব্যাখ্যা (BN): সবচেয়ে তীব্র পীক-কেই ১০০% ধরা হয়—এটি ফ্র্যাগমেন্ট বা M⁺· যেকোনোটি হতে পারে।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

৪২.
High-resolution Mass Spectroscopy  (HRMS) is essential for:
(হাই-রেজোলিউশন MS দরকার হয় কেন?)
  1. Only qualitative work
  2. Exact mass measurement to deduce elemental composition
  3. Fluorescence lifetimes
  4. Raman bands
সঠিক উত্তর:
Exact mass measurement to deduce elemental composition
উত্তর
সঠিক উত্তর:
Exact mass measurement to deduce elemental composition
ব্যাখ্যা

Explanation (EN): HRMS distinguishes formulas with the same nominal mass by measuring accurate m/z to 4–5 decimals.
ব্যাখ্যা (BN): এক্স্যাক্ট-মাস থেকে উপাদানগত সংযোজন নির্ণয় করা যায়—একই নোমিনাল ভরও আলাদা করা সম্ভব।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

৪৩.
Matrix in MALDI serves primarily to:
(MALDI-তে ম্যাট্রিক্সের মূল কাজ কী?)
  1. Provide electrons
  2. Absorb laser energy and gently transfer it to analyte for desorption/ionization
  3. Remove salts
  4. Generate only negative ions
সঠিক উত্তর:
Absorb laser energy and gently transfer it to analyte for desorption/ionization
উত্তর
সঠিক উত্তর:
Absorb laser energy and gently transfer it to analyte for desorption/ionization
ব্যাখ্যা

Explanation:
MALDI= Matrix Assisted Laser Disorption/Ionization 
UV-absorbing matrices (e.g., DHB, CHCA) protect analyte from fragmentation and aid soft ion formation. Ideal for large biomolecules.
ব্যাখ্যা: UV-শোষক ম্যাট্রিক্স লেজারের শক্তি শোষণ করে মৃদুভাবে বিশ্লেষ্যকে গ্যাস-ফেজে তোলে এবং নরম আয়ন তৈরি করে—বড় বায়োমলিকিউলের জন্য উপযোগী।

So the answer is B
Source: Introduction of Spectroscopy, G.M. Barrow

৪৪.
If the wave number of a ray is 104 m-1, which region does the ray belong to? (একটি রশ্মির তরঙ্গ সংখ্যা 104 m-1 হলে রশ্মিটি কোন অঞ্চলের?)
  1. X-Ray
  2. IR
  3. UV
  4. MW
সঠিক উত্তর:
IR
উত্তর
সঠিক উত্তর:
IR
ব্যাখ্যা

তরঙ্গ সংখ্যা= 104 m-1 
Wavelength = 10-4 m=10000nm

So the right answer is B

Source: Any text book from HSC level

৪৫.
Which one has the highest energy? (কোনটির শক্তি সর্বাধিক?)
  1. UV
  2. IR
  3. MW
  4. RW
সঠিক উত্তর:
UV
উত্তর
সঠিক উত্তর:
UV
ব্যাখ্যা

for wavelength,  UV<IR<MW<RW
lower wavelength means higher energy

So the right answer is A

Source: Any text book from HSC level

৪৬.
The Larmor precession frequency of a magnetic moment in a magnetic field is given by: (একটি চৌম্বক ক্ষেত্রের চৌম্বক ভ্রামকের জন্য লারমোর প্রিসেশন কম্পাঙ্ক-)
  1. ωL=eB/2m
  2. ωL=eB/m
  3. ωL=hB/2m
  4. ωL=e/2m
সঠিক উত্তর:
ωL=eB/2m
উত্তর
সঠিক উত্তর:
ωL=eB/2m
ব্যাখ্যা

The Larmor precession frequency of a magnetic moment in a magnetic field: ωL=eB/2m
the Larmor frequency (ωL), which is the angular frequency of a charged particle, such as an electron (with charge e and mass m), in a uniform magnetic field (B).

So the right answer is A

Source: Introduction of Spectroscopy, G.M. Barrow

৪৭.
In the quantum theory of Raman scattering, Stokes lines occur because:
  1. The scattered photon has higher energy than the incident photon
  2. The molecule absorbs vibrational energy from the photon
  3. The molecule loses vibrational energy to the photon
  4. The scattering is purely elastic
সঠিক উত্তর:
The molecule absorbs vibrational energy from the photon
উত্তর
সঠিক উত্তর:
The molecule absorbs vibrational energy from the photon
ব্যাখ্যা

n quantum theory, Stokes lines in Raman scattering occur because an incident photon interacts with a molecule in a lower energy state, exciting it to a higher energy vibrational state by losing energy to the molecule. This energy transfer results in the scattered photon having lower energy than the incident photon, creating a Stokes line shifted to the red side of the incident spectrum. 

So the right answer is B

Source: Introduction of Spectroscopy, G.M. Barrow

৪৮.
Anti-Stokes Raman lines are generally weaker than Stokes lines because: (অ্যান্টি-স্টোকস রমন লাইনগুলি সাধারণত স্টোকস লাইনের তুলনায় দুর্বল কারণ:)
  1. Molecules are more likely to be in the ground vibrational state than in an excited state (অণুগুলি উত্তেজিত অবস্থার চেয়ে ভূমিস্তরে কম্পনশীল অবস্থায় থাকার সম্ভাবনা বেশি।)
  2. The incident photon energy is absorbed completely (আপতিত ফোটন শক্তি সম্পূর্ণরূপে শোষিত হয়)
  3. Anti-Stokes transitions are forbidden by selection rules ( অ্যান্টি-স্টোকস ট্রানজিশন নিষিদ্ধ।)
  4. Scattered photons lose all their energy in the process (এই প্রক্রিয়ায় ছড়িয়ে ছিটিয়ে থাকা ফোটনগুলি তাদের সমস্ত শক্তি হারায়।)
সঠিক উত্তর:
Molecules are more likely to be in the ground vibrational state than in an excited state (অণুগুলি উত্তেজিত অবস্থার চেয়ে ভূমিস্তরে কম্পনশীল অবস্থায় থাকার সম্ভাবনা বেশি।)
উত্তর
সঠিক উত্তর:
Molecules are more likely to be in the ground vibrational state than in an excited state (অণুগুলি উত্তেজিত অবস্থার চেয়ে ভূমিস্তরে কম্পনশীল অবস্থায় থাকার সম্ভাবনা বেশি।)
ব্যাখ্যা

অ্যান্টি-স্টোকস রমন লাইনগুলি সাধারণত স্টোকস লাইনের তুলনায় দুর্বল কারণ অণুগুলি উত্তেজিত অবস্থার চেয়ে ভূমিস্তরে কম্পনশীল অবস্থায় থাকার সম্ভাবনা বেশি। অ্যান্টি-স্টোকস বিক্ষেপণে, ফোটনটি অণুর অতিরিক্ত কম্পন শক্তি শোষণ করে এবং এর ফলে ঘটে যাওয়া এই প্রক্রিয়াটি কম সম্ভাব্য, যার ফলে প্রাপ্ত অ্যান্টি-স্টোকস লাইনের তীব্রতা কম হয়। 

So the right answer is A

Source: Introduction of Spectroscopy, G.M. Barrow

৪৯.
The Beer–Lambert law used in UV spectroscopy relates absorbance to: (UV বর্ণালীতে ব্যবহৃত বিয়ার-ল্যাম্বার্ট সূত্র অনুসারে  absorbance এর সাথে সম্পর্কিত বিষয়গুলি হলো:)
  1. Frequency and wavelength (কম্পাঙ্ক এবং তরঙ্গদৈর্ঘ্য)
  2. Path length and concentration (অতিক্রান্ত দৈর্ঘ্য এবং ঘনমাত্রা)
  3. Temperature and solvent (তাপমাত্রা এবং দ্রাবকের প্রকৃতি)
  4. Pressure and volume (চাপ এবং আয়তন)
সঠিক উত্তর:
Path length and concentration (অতিক্রান্ত দৈর্ঘ্য এবং ঘনমাত্রা)
উত্তর
সঠিক উত্তর:
Path length and concentration (অতিক্রান্ত দৈর্ঘ্য এবং ঘনমাত্রা)
ব্যাখ্যা

বিয়ার-ল্যাম্বার্ট সূত্র : A=eCl
A= absorbance
C= Concentration
l= path length

So the right answer is B

Source: Any text book from HSC level

৫০.
Which one of the following is a practical application of UV-Vis spectroscopy? (নিচের কোনটি UV-Vis বর্ণালীমিতির ব্যবহারিক প্রয়োগ?)
  1. Determining melting point (গলনাঙ্ক নির্ণয়)
  2. Measuring blood pressure (রক্তচাপ পরিমাপ)
  3. Analyzing drug concentration in pharmaceuticals (ওষুধ শিল্পে ওষুধের ঘনমাত্রা বিশ্লেষণ)
  4. Detecting radioactivity (তেজস্ক্রিয়তা সনাক্তকরণ)
সঠিক উত্তর:
Analyzing drug concentration in pharmaceuticals (ওষুধ শিল্পে ওষুধের ঘনমাত্রা বিশ্লেষণ)
উত্তর
সঠিক উত্তর:
Analyzing drug concentration in pharmaceuticals (ওষুধ শিল্পে ওষুধের ঘনমাত্রা বিশ্লেষণ)
ব্যাখ্যা

UV-Vis বর্ণালীমিতির ব্যবহারিক প্রয়োগ বিস্তৃত, যা বিভিন্ন শিল্পে যেমন ঔষধ শিল্পে, খাদ্য ও পানীয় শিল্পে, পরিবেশ বিজ্ঞানে এবং জৈব রসায়নে ব্যবহৃত হয়। এটি অণু শনাক্তকরণ, ঘনত্ব ও বিশুদ্ধতা নির্ধারণ, এবং রাসায়নিক বিক্রিয়া পর্যবেক্ষণের মতো কাজে লাগে। যেমন, DNA ও প্রোটিনের পরিমাণ নির্ধারণ, ওষুধের মান নিয়ন্ত্রণ, এবং পরিবেশের নমুনা বিশ্লেষণসহ বিভিন্ন গবেষণামূলক কাজেও এটি গুরুত্বপূর্ণ ভূমিকা পালন করে।  

So the right answer is C

Source: Introduction of Spectroscopy, G.M. Barrow