পরীক্ষা আর্কাইভ

৪৯তম বিসিএস ⎯ তথ্য ও যোগাযোগ প্রযুক্তি (EEE) [ ৮৯২]

পরীক্ষা৪৯তম বিসিএস ⎯ তথ্য ও যোগাযোগ প্রযুক্তি (EEE) [ ৮৯২]তারিখতারিখ অনির্ধারিতসময়01 hr 30 mins
মোট প্রশ্ন১৮৭
সিলেবাস
Full Model Test - 5
ঘনত্ব
উত্তর
উত্তরিতবর্তমানপুনরায় দেখুনঅসম্পূর্ণ

৪৯তম বিসিএস ⎯ তথ্য ও যোগাযোগ প্রযুক্তি (EEE) [ ৮৯২]

৪৯তম বিসিএস ⎯ তথ্য ও যোগাযোগ প্রযুক্তি (EEE) [ ৮৯২] · তারিখ অনির্ধারিত · ১৮৭ প্রশ্ন

.
উচ্চারণ স্থান অনুসারে 'র' কোন ধরনের ধ্বনি?
  1. কণ্ঠ্য
  2. তালব্য
  3. দন্তমূলীয়
  4. মূর্ধন্য
ব্যাখ্যা

• দন্তমূলীয় ব্যঞ্জন:
যেসব ব্যঞ্জনধ্বনি উচ্চারণের সময়ে জিভের ডগা উপরের পাটির দাঁতের গোড়ার সঙ্গে লেগে বায়ুপথে বাধা সৃষ্টি করে, সেগুলোকে দন্তমূলীয় ব্যঞ্জন বলে। নানা, রাত, লাল, সালাম প্রভৃতি শব্দের ন, র, ল, স দন্তমূলীয় ব্যঞ্জনধ্বনির উদাহরণ।

অন্যদিকে,
• মূর্ধন্য ব্যঞ্জন:
দন্তমূল এবং তালুর মাঝখানে যে উঁচু অংশ থাকে তার নাম মূর্ধা। যেসব ব্যঞ্জনধ্বনি উচ্চারণের সময়ে জিভের ডগা মূর্ধার সঙ্গে লেগে বায়ুপথে বাধা সৃষ্টি করে, সেগুলোকে মূর্ধন্য ব্যঞ্জন বলে। টাকা, ঠেলাগাড়ি, ডাকাত, ঢোল, গাড়ি, মূঢ় প্রভৃতি শব্দের ট, ঠ, ড, ঢ, ড়, ঢ় মূর্ধন্য ব্যঞ্জনধ্বনির উদাহরণ।

• কণ্ঠ্য ব্যঞ্জন:
যেসব ব্যঞ্জনধ্বনি উচ্চারণের সময়ে জিভের পিছনের অংশ উঁচু হয়ে আলজিভের কাছাকাছি নরম তালুর কাছে বায়ুপথে বাধা সৃষ্টি করে, সেগুলোকে কণ্ঠ্য ব্যঞ্জন বলে। কাকা, খালু, গাধা, ঘাস, কাঙাল প্রভৃতি শব্দের ক, খ, গ, ঘ, ঙ কণ্ঠ্য ব্যঞ্জনধ্বনির উদাহরণ।

• তালব্য ব্যঞ্জন:
যেসব ব্যঞ্জনধ্বনি উচ্চারণের সময়ে জিভের ডগা খানিকটা প্রসারিত হয়ে শক্ত তালুর কাছে বায়ুপথে বাধা সৃষ্টি করে, সেগুলোকে তালব্য ব্যঞ্জন বলে। চাচা, ছাগল, জাল, ঝড়, শসা প্রভৃতি শব্দের চ, ছ, জ, ঝ, শ তালব্য ব্যঞ্জনধ্বনির উদাহরণ।

উৎস: বাংলা ভাষার ব্যাকরণ ও নির্মিতি, নবম-দশম শ্রেণি (২০২২ সংস্করণ)।

.
নিচের কোন শব্দটিতে ‘ণ’ - এর ভুল প্রয়োগ ঘটেছে?
  1. আপণ
  2. বিপণি
  3. পিণ্ডারি
  4. নিপুণ
ব্যাখ্যা

• তৎসম শব্দের বানানে ণ-এর সঠিক ব্যবহারের নিয়মকে ণ-ত্ব বিধান বলে।

• ‘ণ’ - এর ভুল প্রয়োগ ঘটেছে- পিণ্ডারি শব্দে।
• 'পিণ্ডারি' শব্দটির সঠিক বানান - পিন্ডারি।
• 'পিন্ডারি' অর্থ- মহারাষ্ট্রীয় অশ্বারোহী দস্যুদল, বর্গি।
'পিন্ডারি' মারাঠি শব্দ। বিদেশি শব্দে ণ-ত্ব বিধানের নিয়ম খাটে না।

অন্যদিকে,
----------------
• আপণ-

→ আপণ একটি পুরনো তদ্ভব শব্দ, যার অর্থ: নিজের মালিকানাধীন বা দোকান।
→ যদিও অনেকেই আপন ভাবেন, আসলে আপণ বানানটিও অভিধানসম্মতভাবে স্বীকৃত।
→ উদাহরণ: “আপণ প্রতিষ্ঠানে সে কর্মরত।”

• বিপণি-
→ শুদ্ধ বানান: বিপণি (অর্থ: দোকান)
→ ‘ণ’ ব্যবহারে ভুল নেই।

• নিপুণ-
→ শুদ্ধ বানান: নিপুণ (অর্থ: দক্ষ/কুশলী)
→ সঠিক প্রয়োগ।

উৎস: বাংলা ভাষার ব্যাকরণ, নবম-দশম শ্রেণি, (সংস্করণ-২০১৯); বাংলা একাডেমি, আধুনিক বাংলা অভিধান।

.
'অর্থবছর' এর ব্যাসবাক্য-
  1. অর্থ ও বছর
  2. অর্থের বছর
  3. অর্থ রূপ বছর
  4. অর্থ হিসাবের বছর
ব্যাখ্যা

সঠিক উত্তর হলো - ঘ) অর্থ হিসাবের বছর।

ব্যাখ্যা:
'অর্থবছর' একটি কর্মধারয় সমাস যার ব্যাসবাক্য হলো "অর্থ হিসাবের বছর"।

'অর্থবছর' এর প্রকৃত অর্থ: সরকারি বা প্রাতিষ্ঠানিক আর্থিক হিসাব-নিকাশের জন্য নির্ধারিত ১২ মাসের সময়কাল, যা সাধারণত ১ জুলাই থেকে ৩০ জুন পর্যন্ত হয়ে থাকে।

মধ্যপদলোপী কর্মধারয়:
- যে কর্মধারয় সমাসে ব্যাসবাক্যের মধ্যপদের লোপ হয়, তাকে মধ্যপদলোপী কর্মধারয় সমাস বলে।

যেমন:
- স্মৃতি রক্ষার্থে সৌধ = স্মৃতিসৌধ,
- সাহিত্য বিষয়ক সভা = সাহিত্যসভা,
- হাসি মাখা মুখ = হাসিমুখ,
- গণ নিয়ন্ত্রিত তন্ত্র = গণতন্ত্র ইত্যাদি।

উৎস: বাংলা ভাষার ব্যাকরণ, নবম-দশম শ্রেণি (২০১৯ ও ২০২১ সংস্করণ)।

.
'যথার্থ' শব্দটি সন্ধি-বিচ্ছেদর কোন নিয়মে হয়েছে?
  1. স্বরসন্ধির
  2. ব্যঞ্জনসন্ধির
  3. বিসর্গসন্ধির
  4. কোনোটিই নয়
ব্যাখ্যা

• 'যথার্থ' এর সঠিক সন্ধি বিচ্ছেদ = যথা + অর্থ।
- এটি স্বরসন্ধির উদাহরণ।

• সন্ধির নিয়ম:
- আ + অ = আ; সূত্র যোগে গঠিত শব্দ।

এরূপ আরও কিছু শব্দ,
- আশা + অতীত = আশাতীত,
- কথা + অমৃত = কথামৃত,
- মহা + অর্ঘ = মহার্ঘ ইত্যাদি।

উৎস: বাংলা ভাষার ব্যাকরণ, নবম-দশম শ্রেণি (২০১৯ সংস্করণ), ভাষা শিক্ষা- ড.হায়াৎ মামুদ, বাংলা ভাষা ও সাহিত্য জিজ্ঞাসা।

.
কালকেতু উপাখ্যানের কবি কে?
  1. ভারতচন্দ্র রায়গুণাকর
  2. মুকুন্দরাম চক্রবর্তী
  3. কেতকাদাস ক্ষেমানন্দ
  4. বিজয় গুপ্ত
ব্যাখ্যা

• কালকেতু উপাখ্যান মুকুন্দরাম চক্রবর্তীর "চণ্ডীমঙ্গল" কাব্যের একটি অংশ।

• চণ্ডীমঙ্গল’ কাব্য:

- 'চণ্ডীমঙ্গল’ চণ্ডী নামক লৌকিক-পৌরাণিক দেবীর পূজা প্রচারের কাহিনি অবলম্বনে লিখিত কাব্য।
- চণ্ডীমঙ্গল কাব্যের আদি কবি মানিক দত্ত।
- চণ্ডীমঙ্গল ধারার প্রধান বা শ্রেষ্ঠ কবির নাম মুকুন্দরাম চক্রবর্তী৷

• এই কাব্যের দুটি উপাখ্যান রয়েছে-
১. একটি ব্যাধ দম্পতি কালকেতু ও ফুল্লরার কাহিনি, চণ্ডী বরে কালকেতুর ধনপ্রাপ্তি নতুন রাজ্যপত্তন, ধূর্ত ভাড়ুদত্তের ষড়যন্ত্রে প্রতিবেশী রাজার সঙ্গে যুদ্ধ।
২. দ্বিতীয় উপাখ্যানের নায়ক ধনপতি সওদাগর, অন্যান্য প্রধান চরিত্র তার দুই স্ত্রী লহনা ও খুল্লনা।

- চণ্ডীমঙ্গল কাব্যের কবি দ্বিজ মাধবকে 'স্বভাব কবি' বলা হয়।
- চণ্ডীমঙ্গল কাব্যে অন্যান্য কবি গুলো হলো: দ্বিজ রামদেব, মুক্তারাম সেন, হরিরাম, লালা জয়নারায়ণ সেন, ভবানীশঙ্কর দাস, অকিঞ্চন চক্রবর্তী।

• ‘কালকেতু উপাখ্যানে’ ফুল্লরার উদ্দেশ্যে কালকেতু বলেছে:
শাশুড়ি ননদি নাহি নাহি তোর সতা।
কার সঙ্গে দ্বন্দ্ব করি চক্ষু কৈলি রাতা।।

• চণ্ডীমঙ্গল কাব্যের প্রধান চরিত্রগুলাে হলো:
- কালকেতু,
- ফুল্লরা,
- ধনপতি,
- ভাঁড়ুদত্ত,
- মুরারি শীল প্রমুখ।

উৎস: বাংলা ভাষা ও সাহিত্য জিজ্ঞাসা এবং বাংলাপিডিয়া; (‘কালকেতু উপাখ্যান’: মুকুন্দরাম চক্রবর্তী)।

.
'Profiteer' এর বাংলা পরিভাষা -
  1. শিক্ষানবিস
  2. মুনাফাখোর
  3. প্রতারণা
  4. কার্যক্রম-সমন্বয়ক
ব্যাখ্যা

• 'Profiteer' এর বাংলা পরিভাষা - মুনাফাখোর।

অন্যদিকে,
• 'Apprentice' এর বাংলা পরিভাষা- 'শিক্ষানবিস'।
• 'Deceit' এর বাংলা পরিভাষা- 'প্রতারণা'।
• ‘Programme co-ordinator’ শব্দের বাংলা পরিভাষা - 'কার্যক্রম সমন্বয়ক'।

উৎস: বাংলা একাডেমি, প্রশাসনিক পরিভাষা।

.
"ঘরের খেয়ে পরের মোষ তাড়ানো।" বাক্যটি কোন কারণে অশুদ্ধ?
  1. বানান ভুল আছে
  2. প্রত্যয়সাধিত শব্দের ভুল প্রয়োগ
  3. প্রবাদের বিকৃতি
  4. বিশেষ্য-বিশেষণের অপপ্রয়োগ ঘটেছে
ব্যাখ্যা

• "ঘরের খেয়ে পরের মোষ তাড়ানো" বাক্যটি অশুদ্ধ কারণ এটি একটি প্রচলিত প্রবাদের বিকৃত রূপ।

সঠিক প্রবাদ: "ঘরের খেয়ে বনের মোষ তাড়ানো"।

প্রবাদের অর্থ: "ঘরের খেয়ে বনের মোষ তাড়ানো" মানে নিজের ঘরে খাওয়া-দাওয়া করে অন্যের (বনের) কাজ করা - অর্থাৎ কৃতজ্ঞতা না দেখিয়ে অন্যের পক্ষে কাজ করা।

অশুদ্ধতার ধরন:
প্রাচীন প্রবাদের প্রচলিত রূপে পরিবর্তন ঘটিয়ে ভুল শব্দ ব্যবহার করলে বাক্যে অশুদ্ধি ঘটে।

উৎস: প্রমিত বাংলা ব্যাকরণ ও নির্মিতি, ড. হায়াৎ মামুদ ও ড. মোহাম্মদ আমীন।

.
'বন্দর' কোন ভাষার শব্দ?
  1. তৎসম
  2. আরবি
  3. মারাঠি
  4. ফারসি
ব্যাখ্যা

• 'বন্দর':
- শব্দটি ফারসি ভাষা হতে আগত।
- এটি একটি বিশেষ্য পদ।
এর অর্থ:
- সমুদ্র বা নদীর তীরবর্তী স্থান যেখানে নৌযানে পণ্য বোঝাই বা খালাস করা হয়।

• ফারসি ভাষা থেকে আগত আরো কিছু শব্দ হলো:
গ্রেপ্তারি, গ্রেফতার, দারোগা, লুঙ্গি, সাদা, আসমান, কাজি, খোয়াব, চেহারা, কাগজ, চশমা, চারপায়া, ছয়লাপ ইত্যাদি।

সূত্র: বাংলা একাডেমি আধুনিক বাংলা অভিধান।

.
‘ইচ্ছা’ এর সমার্থক শব্দ নয় কোনটি?
  1. স্পৃহা
  2. বাঞ্ছা
  3. বাসনা
  4. আহ্লাদ
ব্যাখ্যা

• ‘ইচ্ছা’ এর সমার্থক শব্দ:
- আকাঙ্ক্ষা, আশা, ইচ্ছা, প্রার্থনা, চাওয়া, স্পৃহা, অভিপ্রায়, সাধ, অভিরুচি, প্রবৃত্তি, মনোরথ, ঈপ্সা, অভীপ্সা, বাসনা, কামনা, বাঞ্ছা

অন্যদিকে,
‘আনন্দ’ শব্দের সমার্থক শব্দ:
- খুশি, আমোদ, মজা, হর্ষ, আহ্লাদ, স্ফূর্তি, সন্তোষ, পরিতোষ, প্রমোদ, উল্লাস, উচ্ছ্বাস।

উৎস: বাংলা ভাষার ব্যাকরণ ও নির্মিতি, নবম-দশম শ্রেণি (২০২২ সংস্করণ)।

১০.
মুসলমান নারী কর্তৃক লিখিত বাংলা সাহিত্যকর্ম ‘রূপজালাল’–এর লেখক–
  1. বেগম রোকেয়া
  2. নওয়াব ফয়জুন্নেসা চৌধুরী
  3. রহিমুন্নিসা
  4. শামসুর নাহার
ব্যাখ্যা

• 'রূপজালাল' এর পরিচিতি:
- গদ্যে-পদ্যে নবাব ফয়জুন্নেসা রচিত রূপজালাল (১৮৭৬) গ্রন্থটি রূপকের আশ্রয়ে একটি আত্মজীবনীমূলক রচনা।
- এতে তাঁর বিড়ম্বিত দাম্পত্য জীবনের করুণ কাহিনি স্থান পেয়েছে।
- এটি ১৮৭৬ সালে ঢাকা থেকে প্রথম প্রকাশিত হয়।
- এটি সম্ভবত বাংলার একজন মুসলিম মহিলা কর্তৃক প্রথম রচিত একটি পূর্ণাঙ্গ সাহিত্যকর্ম।
- ফয়জুন্নেসার নিজের একটি লাইব্রেরি ছিল। সেখানে তিনি বিভিন্ন সাহিত্য ও ধর্মবিষয়ক গ্রন্থাদি পাঠ করতেন। তাঁর স্বোপার্জিত জ্ঞানের প্রতিফলন লক্ষ করা যায় উক্ত প্রতীকাশ্রয়ী গ্রন্থটিতে।
- পুথি ও জারিগানের মিশ্র ধারায় লিখিত এ গ্রন্থটি শুরু হয়েছে আল্লাহর প্রশংসা এবং নবী মুহাম্মদ (সা.)-এর প্রতি সম্মান প্রদর্শন করে।
- সমকালীন বাংলায় মুসলমানদের সাহিত্যচর্চার প্রচলিত রীতি অনুযায়ী ফয়জুন্নেসা তাঁর লেখায় অনেক আরবি, ফার্সি ও উর্দু শব্দ ব্যবহার করেছেন।

------------------
নবাব ফয়জুন্নেসা চৌধুরানী:
- নবাব ফয়জুন্নেসা চৌধুরানী ছিলেন জমিদার, নারীশিক্ষার প্রবর্তক, সমাজসেবক ও কবি।
- কুমিল্লা জেলার লাকসাম উপজেলাধীন পশ্চিমগাঁও গ্রামে এক জমিদার বংশে তিনি জন্মগ্রহণ করেন। তাঁর পিতা আহমদ আলী চৌধুরী ছিলেন হোমনাবাদ-পশ্চিমগাঁও-এর জমিদার।
- পারিবারিক পরিবেশে গৃহশিক্ষকের তত্ত্বাবধানে বাড়িতেই তিনি শিক্ষালাভ করেন। মুসলমানদের কঠিন পর্দাপ্রথার মধ্যে থেকেও ফয়জুন্নেসা আরবি, ফারসি ও উর্দুর পাশাপাশি বাংলা ও সংস্কৃত ভাষায়ও ব্যুৎপত্তি অর্জন করেন।

- নবাব ফয়জুন্নেসা আলোচিত আত্মজীবনীমূলক রচনা রূপজালাল।
- এছাড়া সঙ্গীতসার ও সঙ্গীতলহরী নামে তাঁর দুখানি কাব্যের কথাও জানা যায়। উল্লেখ্য যে, নবাব ফয়জুন্নেসা এমন এক সময়ে বাংলা ভাষা ও সাহিত্যের চর্চা করেন যখন অভিজাত মুসলমানদের মধ্যে এই ভাষা সাধারণত ব্যবহৃত হতো না।

উৎস: বাংলাপিডিয়া।

১১.
'গন্তব্য' এর সঠিক প্রকৃতি-প্রত্যয় কোনটি?
  1. √ গম্‌ + অব্য
  2. √ গন্‌ + তব্য
  3. √ গম্ + তব্য
  4. √ গন্ত + অ
ব্যাখ্যা

• 'গন্তব্য'- এর সঠিক প্রকৃতি প্রত্যয় - √ গম্ + তব্য।

এখানে,
- '√ গম্‌' সংস্কৃত ক্রিয়াপ্রকৃতি এবং 'তব্য' সংস্কৃত কৃৎ প্রত্যয়।
- শব্দের অর্থ: গমনের লক্ষ্য।

- ধাতুর সঙ্গে যখন কোনো ধ্বনি বা ধ্বনি-সমষ্টি যুক্ত হয়ে বিশেষ্য বা বিশেষণ পদ তৈরি হয়, তখন ক্রিয়ামূল বা ধাতুকে বলা হয় ক্রিয়া প্রকৃতি বা প্রকৃতি।

- ক্রিয়া প্রকৃতির সঙ্গে যে ধ্বনি বা ধ্বনিসমষ্টি যুক্ত হয়, তাকে বলে কৃৎ-প্রত্যয়।
- যেমন- চল্ (ক্রিয়া প্রকৃতি)+ অন (কৃৎ-প্রত্যয়)= চলন (বিশেষ্য পদ)।

উৎস:বাংলা ভাষার ব্যাকরণ ও নির্মিতি, নবম-দশম শ্রেণি (২০১৮ সংস্করণ)।

১২.
'সজ্জন' এর বিপরীত শব্দ -
  1. বর্জন
  2. অসজ্জন
  3. দুর্জন
  4. খ এবং গ উভয়ই
ব্যাখ্যা

• 'সজ্জন' এর অর্থ: সৎলোক; সাধু ব্যক্তি।
- অসজ্জন অর্থ: অসাধু বা দুষ্ট লোক।
- 'দুর্জন' অর্থ - দুষ্ট বা খারাপ লোক।

সুতরাং,
• 'সজ্জন' এর বিপরীত শব্দ - "অসজ্জন এবং দুর্জন" উভয়ই।

• কিছু গুরুত্বপূর্ণ বিপরীত শব্দ:
• 'বর্জন' এর বিপরীত শব্দ - গ্রহণ।
• 'উৎকর্ষ' এর বিপরীত শব্দ - অপকর্ষ।
• 'গৃহী' এর বিপরীত শব্দ - সন্ন্যাসী।
• 'দাতা' এর বিপরীত শব্দ - গ্রহীতা।
• 'ক্ষয়িষ্ণু' এর বিপরীত শব্দ - বর্ধিষ্ণু।

উৎস: ভাষা শিক্ষা, ড. হায়াৎ মামুদ।

১৩.
নিম্নবিবৃত স্বরধ্বনি —




ব্যাখ্যা

• নিম্নবিবৃত স্বরধ্বনি — আ।

• স্বরধ্বনির উচ্চারণ:
উচ্চারণের সময়ে জিভের উচ্চতা অনুযায়ী, জিভের সম্মুখ-পশ্চাৎ অবস্থান অনুযায়ী এবং ঠোঁটের উন্মুক্তি অনুযায়ী স্বরধ্বনিকে ভাগ করা হয়।

উচ্চারণের সময়ে জিভ কতটা নিচে নামে সেই অনুযায়ী স্বরধ্বনি চার ভাগে বিভক্ত।
যথা -
১. উচ্চ স্বরধ্বনি - ই, উ।
২. উচ্চ -মধ্য স্বরধ্বনি - এ, ও।
৩. নিম্ন-মধ্য স্বরধ্বনি - অ্যা, অ।
৪. নিম্ন স্বরধ্বনি - আ।

• স্বরধ্বনি উচ্চারণের সময়ে ঠোঁট কতটুকু খোলা বা বন্ধ থাকে অর্থাৎ কী পরিমাণ উন্মুক্ত হয়, তার ভিত্তিতে স্বরধ্বনি চার ভাগে বিভক্ত।
- সংবৃত: [ই], [উ]।
- অর্ধ-সংবৃত: [ এ ], [ও]।
- বিবৃত: [আ]।
- অর্ধ-বিবৃত: [অ্যা], [অ]।

• সংবৃত স্বরধ্বনি উচ্চারণের সময়ে ঠোঁট কম খোলে; বিবৃত স্বরধ্বনি উচ্চারণের সময়ে ঠোঁট বেশি খোলে।

উৎস: বাংলা ভাষার ব্যাকরণ ও নির্মিতি, নবম-দশম শ্রেণি (২০২২ সংস্করণ)।

১৪.
"মুহূর্ত তুলিয়া শির একত্র দাঁড়াও দেখি সবে,
যার ভয়ে তুমি ভীত সে অন্যায় ভীরু তোমা চেয়ে,
যখনি জাগিবে তুমি তখনি সে পলাইবে ধেয়ে।"- কে লিখেছেন?
  1. কাজী নজরুল ইসলাম
  2. হাসান আজিজুল হক
  3. সুকান্ত ভট্টাচার্য
  4. রবীন্দ্রনাথ ঠাকুর
ব্যাখ্যা

• "মুহূর্ত তুলিয়া শির একত্র দাঁড়াও দেখি সবে,
যার ভয়ে তুমি ভীত সে অন্যায় ভীরু তোমা চেয়ে,
যখনি জাগিবে তুমি তখনি সে পলাইবে ধেয়ে।" - কবিতাংশুটুকুর রচয়িতা - রবীন্দ্রনাথ ঠাকুর। এটি তাঁর 'চিত্রা' কাব্যগ্রন্থের এবার ফিরাও মোরে- কবিতার অংশবিশেষ।

'চিত্রা' কাব্যগ্রন্থ:
- রবীন্দ্রনাথ ঠাকুর রচিত কাব্যগ্রন্থ 'চিত্রা'।
- ১৩০২ বঙ্গাব্দ মোতাবেক ১৮৯৬ সালে প্রকাশিত হয়।
- এই কাব্যগ্রন্থে মোট ৩৫টি কবিতা রয়েছে।

এবার ফিরাও মোরে- কবিতার অংশবিশেষ-

মুহূর্ত তুলিয়া শির একত্র দাঁড়াও দেখি সবে,
যার ভয়ে তুমি ভীত সে অন্যায় ভীরু তোমা চেয়ে,
যখনি জাগিবে তুমি তখনি সে পলাইবে ধেয়ে;
যখনি দাঁড়াবে তুমি সম্মুখে তাহার, তখনি সে
পথকুক্কুরের মতো সংকোচে সত্রাসে যাবে মিশে;
দেবতা বিমুখ তারে, কেহ নাহি সহায় তাহার,
মুখে করে আস্ফালন, জানে সে হীনতা আপনার
মনে মনে। (সংক্ষেপিত)

রবীন্দ্রনাথ ঠাকুর:
- তিনি ছিলেন কবি, সঙ্গীতজ্ঞ, কথাসাহিত্যিক, নাট্যকার, চিত্রশিল্পী, প্রাবন্ধিক, দার্শনিক, শিক্ষাবিদ ও সমাজ-সংস্কারক।
- রবীন্দ্রনাথ ঠাকুরের জন্ম ১৮৬১ সালের ৭ মে (১২৬৮ বঙ্গাব্দের ২৫ বৈশাখ) কলকাতার জোড়াসাঁকোর অভিজাত ঠাকুর পরিবারে।
- তাঁর পিতা মহর্ষি দেবেন্দ্রনাথ ঠাকুর এবং পিতামহ প্রিন্স দ্বারকানাথ ঠাকুর।
- এশিয়ার বরেণ্য ব্যক্তিদের মধ্যে তিনিই প্রথম ১৯১৩ সালে নোবেল পুরস্কারে ভূষিত হন।
- ১৯৪১ সালের ৭ আগস্ট (২২ শ্রাবণ ১৩৪৮) জোড়াসাঁকোর নিজ বাড়িতে রবীন্দ্রনাথ ঠাকুর শেষ নিঃশ্বাস ত্যাগ করেন।

উৎস: বাংলা ভাষা ও সাহিত্য জিজ্ঞাসা, চিত্রা কাব্যগ্রন্থ- রবীন্দ্রনাথ ঠাকুর ও বাংলাপিডিয়া।

১৫.
সাকিব বলল, "আমি এখানে থাকব"। - বাক্যটির পরোক্ষ উক্তিতে রূপান্তর কোনটি?
  1. সাকিব বলল যে, সে সেখানে থাকবে।
  2. সাকিব বলল, "আমি সেখানে থাকব।"
  3. সাকিব বলল, "সে এখানে থাকবে।
  4. সাকিব জানাল যে আমি এখানে থাকব।
ব্যাখ্যা

সঠিক উত্তর — ক) সাকিব বলল যে, সে সেখানে থাকবে।

ব্যাখ্যা:
প্রত্যক্ষ উক্তি: বলল সাকিব, "আমি এখানে থাকব"।
সঠিক পরোক্ষ উক্তি: সাকিব বলল যে, সে সেখানে থাকবে।

উক্তি রূপান্তরের নিয়মসমূহ:
১. পুরুষের পরিবর্তন:
"আমি" → "সে" (প্রথম পুরুষ থেকে তৃতীয় পুরুষে)।

২. স্থানের পরিবর্তন:
"এখানে" → "সেখানে" (নিকট স্থান থেকে দূর স্থানে)।

৩. বাক্য গঠন:
উদ্ধৃতি চিহ্ন সরিয়ে "যে" সংযোজক অব্যয়।

৪. ক্রিয়ার রূপ:
"থাকব" → "থাকবে" (পুরুষ অনুযায়ী পরিবর্তন)।

অন্যান্য অপশনগুলো কেন ভুল:
ক) এখনও প্রত্যক্ষ উক্তি (উদ্ধৃতি চিহ্ন আছে) এবং পুরুষ পরিবর্তন হয়নি।
গ) পুরুষ ও স্থান পরিবর্তন হয়নি ("আমি এখানে" রয়ে গেছে)।
ঘ) এখনও প্রত্যক্ষ উক্তি (উদ্ধৃতি চিহ্ন আছে)।

উৎস: বাংলা ভাষার ব্যাকরণ, নবম-দশম শ্রেণি (২০১৯ সংস্করণ), ভাষা শিক্ষা- ড. হায়াৎ মামুদ।

১৬.
"বীণার ঝঙ্কারসম যে প্রীতি ধ্বনিত হয় নিতি।" - এখানে 'প্রীতি' কোন পদ?
  1. বিশেষ্য
  2. বিশেষণ
  3. অব্যয়
  4. ক্রিয়া বিশেষণ
ব্যাখ্যা

• "বীণার ঝঙ্কারসম যে প্রীতি ধ্বনিত হয় নিতি" - এই বাক্যে 'প্রীতি' একটি বিশেষ্য পদ।

তবে,
"প্রীতিময় মুখ" - এখানে 'প্রীতিময়' বিশেষণ।
------------
এমন কিছু গুরুত্বপূর্ণ শব্দ:
- গাম্ভীর্য হলো বিশেষ্য পদ।
- গাম্ভীর্য শব্দের বিশেষণ রূপ - গম্ভীর।
- 'ইচ্ছা' শব্দটি বিশেষ্য পদ।
- জাত ও উদ্ধত - বিশেষণ পদ।
- গৈরিক - বিশেষ্য ও বিশেষণ পদ।

উৎস: বাংলা একাডেমি আধুনিক বাংলা অভিধান।

১৭.
বাংলা একাডেমি কর্তৃক প্রকাশিত প্রথম বই-
  1. লাইলি মজনু
  2. বাংলাদেশের লোকজ সংস্কৃতি গ্রন্থমালা
  3. ব্যবহরিক বাংলা অভিধান
  4. আধুনিক বাংলা অভিধান
ব্যাখ্যা

বাংলা একাডেমি কর্তৃক প্রকাশিত প্রথম বই ছিল—
দৌলত উজির বাহ্‌রাম খাঁর- লাইলি মজনু।

বাংলা একাডেমি সম্পর্কিত কিছু তথ্য:
১৯৫২ সালের ভাষা আন্দোলন এবং এ দেশের মুসলিম মধ্যবিত্তের জাগরণ ও আত্মপরিচয় বিকাশের প্রেরণায় এ প্রতিষ্ঠানের জন্ম হয়।

- বাংলা একাডেমি প্রতিষ্ঠিত হয় ১৯৫৫ সালের ৩ ডিসেম্বর।
- প্রথম প্রকাশিত বইটি ছিল লাইলি মজনু, যা মধ্যযুগীয় বাংলা প্রেমকাব্যের একটি গুরুত্বপূর্ণ গ্রন্থ।
- পরে একাডেমি আঞ্চলিক ভাষার অভিধান, লোকসংস্কৃতি বিষয়ক গ্রন্থ এবং ব্যবহরিক বাংলা অভিধান, আধুনিক বাংলা অভিধান ইত্যাদি গুরুত্বপূর্ণ প্রকাশনা করে।

উৎস: বাংলা একাডেমি; প্রথম আলো পত্রিকা রিপোর্ট- লিংক।

১৮.
'লালসালু'- উপন্যাসের কোন চরিত্রটি নারী বিদ্রোহ ও প্রতিবাদের প্রতীক?
  1. রহিমা
  2. আমেনা
  3. জমিলা
  4. হাসুনির মা
ব্যাখ্যা

‘লালসালু’ উপন্যাস সম্পর্কিত আলোচনা:
• ‘লালসালু’ সৈয়দ ওয়ালীউল্লাহ্ রচিত উপন্যাস। ১৯৪৮ সালে কলকাতা থেকে গ্রন্থাকারে প্রকাশিত।
• এই উপন্যাসে একদিকে যেমন বাংলার গ্রামজীবনের বাস্তব প্রকৃতি ধরা পড়েছে তার সৌন্দর্য, মাধুর্য ও কঠোরতা নিয়ে; তেমনই রূপায়িত হয়েছে অসংখ্য গ্রামীণ মানুষের জীবন।
• নোয়াখালি অঞ্চল থেকে মজিদ নামের একটি কূটচরিত্র গারোপাহাড়ি অঞ্চলে গিয়ে সেই এলাকার মানুষকে ধর্মের নামে কীভাবে শোষণ করে, সেই বাস্তব চিত্র আছে উপন্যাসটিতে।

• ধর্ম ব্যবসায়ী মজিদ অর্থ ও প্রভাব বৃদ্ধির সঙ্গে অল্পবয়সী দ্বিতীয় স্ত্রী গ্রহণ করে। সে গ্রামের মোড়লদেরও প্রভাবিত করে। পাশের গ্রামে অন্য পিরের আগমন হলে, নিজের দাপট খর্ব হবে বিবেচনায়, তাকে মারধর দিয়ে উচ্ছেদ করে।
• তবে স্বল্পবয়সী স্ত্রী জমিলা কর্তৃক মজিদ লাঞ্ছিত হয়। উপন্যাসে জমিলা বিদ্রোহিণী, প্রতিবাদের প্রতীক।
• 'লালসালু'র একটি বহুমাত্রিক ও কালোত্তীর্ণ উপন্যাস।
• ঔপন্যাসিক ধর্মব্যবসায়ীদের উপলক্ষ করে লিখেছেন: 'খোদার এলেমে বুক ভরে না তলায় পেট শূন্য বলে।'
• উপন্যাসটি 'Tree Without Roots' নামে ইংরেজিতে অনূদিত হয়ে (১৯৬৭) খ্যাতি অর্জন করে।
• ওয়ালীউল্লাহর পত্নী অ্যান মেরির ‘লালসালু'র ফরাসি অনুবাদের নাম- ল্য অরবরে সামস মায়েমে (১৯৬১)।

• উপন্যাসের উল্লেখযোগ্য চরিত্র:
- মজিদ,
- খালেক ব্যাপারি,
- জমিলা,
- রহিমা,
- আমেনা,
- আক্কাস,
- তাহেরের বাপ,
- হাসুনির মা।

-----------------------
• সৈয়দ ওয়ালীউল্লাহ্‌:
- সৈয়দ ওয়ালীউল্লাহ্‌ ছিলেন একজন কথাসাহিত্যিক, নাট্যকার।
- তিন ১৯২২ সালের ১৫ আগস্ট চট্টগ্রামের ষোলশহরে সৈয়দ বাড়িতে জন্মগ্রহণ করেন।
- তিনি ফেনি স্কুলের ছাত্রাবস্থায় ‘ভোরের আলো’ নামে হাতে লেখ পত্রিকার সম্পাদনা করেন।
- তাঁর প্রকাশিত প্রথম গল্প ‘হঠাৎ আলোর ঝলকানি’। এটি ঢাকা কলেজ ম্যাগাজিনে প্রকাশিত হয়।
- ১৯৪৫ থেকে ১৯৪৭ পর্যন্ত কলকাতার ‘দৈনিক স্টেটসম্যান’ পত্রিকার সহকারী সম্পাদক হিসেবে তিনি দায়িত্ব পালন করেন।
- তারঁ রচিত প্রথম উপন্যাস ‘লালসালু’ (১৯৪৮)।

• তাঁর রচিত অন্যান্য উপন্যাস:
- চাঁদের অমাবস্যা,
- কাঁদো নদী কাঁদো।
- দি আগলি এশিয়ান।

• তাঁর রচিত গল্পগ্রন্থ:
- নয়নচারা,
- দুই তীর ও অন্যান্য গল্প।

• তাঁর রচিত নাটক:
- বহিপীর,
- তরঙ্গভঙ্গ,
- উজান মৃত্যু।

উৎস: বাংলা ভাষা ও সাহিত্য জিজ্ঞাসা এবং বাংলাপিডিয়া।

১৯.
'চৌচির' শব্দের অর্থ কোনটি?
  1. খণ্ডে খণ্ডে বিভক্ত
  2. খণ্ডবিখণ্ড
  3. চার খণ্ডে বা অংশে বিভক্ত
  4. উপরের সবগুলোই
ব্যাখ্যা

• বাংলা একাডেমি আধুনিক বানান অভিধান অনুসারে,
'চৌচির' শব্দের অর্থ- খণ্ডে খণ্ডে বিভক্ত; খণ্ডবিখণ্ড; চার খণ্ডে বা অংশে বিভক্ত।
অর্থ্যাৎ, সঠিক উত্তর - অপশন (ঘ)।



আরো কিছু শব্দার্থ:
- আভরণ শব্দের অর্থ - অলঙ্কার,
- আভাষ শব্দের অর্থ - ভূমিকা বা আলাপ,
- ‘সওগাত’ শব্দের অর্থ - উপঢৌকন; উপহার,
- আশীষ শব্দের অর্থ- শীর্ষ পর্যন্ত,
- আশি শব্দের অর্থ- ৮০ সংখ্যা,
- আশী শব্দের অর্থ- বিষদাঁত।

উৎস: বাংলা একাডেমি আধুনিক বাংলা অভিধান।

২০.
নিচের কোনটি যৌগিক ক্রিয়ার উদাহরণ?
  1. গরম করা
  2. উদয় হওয়া
  3. এগিয়ে চলা
  4. ঠনঠন করা
ব্যাখ্যা

• যৌগিক ক্রিয়ার উদাহরণ - এগিয়ে চলা।
-------------------------------
• যৌগিক ক্রিয়া:
অসমাপিকা ক্রিয়ার সঙ্গে সমাপিকা ক্রিয়া যুক্ত হয়ে যখন একটি ক্রিয়া গঠন করে, তখন তাকে যৌগিক ক্রিয়া বলে।
যেমন
- মরে যাওয়া,
- কমে আসা,
- এগিয়ে চলা,
- হেসে ওঠা,
- উঠে পড়া,
- পেয়ে বসা, ইত্যাদি।

অন্যদিকে,
সংযোগ ক্রিয়া:
বিশেষ্য, বিশেষণ বা ধ্বন্যাত্মক শব্দের পরে করা, কাটা, হওয়া, দেওয়া, ধরা, পাওয়া, খাওয়া, মারা প্রভৃতি ক্রিয়া যুক্ত হয়ে সংযোগ ক্রিয়া গঠিত হয়।
যেমন-
গরম করা, গান করা, উদয় হওয়া, ঠনঠন করা, বৃদ্ধি পাওয়া ইত্যাদি।

উৎস: বাংলা ভাষার ব্যাকরণ ও নির্মিতি, ৯ম-১০ম শ্রেণি, ২০২২ সালের সংস্করণ।

২১.
"Have an axe to grind" means to _____.
  1. have a selfish reason
  2. have work for charity
  3. have preparation for the fight
  4. have a great goal
ব্যাখ্যা

• "Have an axe to grind" means to have a selfish reason.

• To have an axe/ax to grind (idiom):
- English Meaning: to have a selfish reason or strong opinion that influences your actions; an ulterior often selfish underlying purpose.
- Bangla Meaning: (লাক্ষণিক) ব্যক্তিস্বার্থ থাকা।

Example Sentences:
- Environmentalists have no political axe to grind - they just want to save the planet.
- The study should be conducted by a firm that has no axe to grind.

Source:
1. Cambridge Dictionary.
2. Merriam-Webster Dictionary.

২২.
What kind of noun is 'Grammar'?
  1. Proper noun
  2. Common noun
  3. Abstract noun
  4. Collective noun
ব্যাখ্যা

• 'Grammar' is an Abstract noun.

• Abstract noun:
- যে Noun কোনো অবস্তুগত ধারণা বা গুণকে নির্দেশ করে; যার কোনো বাহ্যিক অস্তিত্ব নেই এবং যা ছোঁয়া যায় না, গন্ধ দ্বারা বা শ্রবণ দ্বারা বোঝা যায় না; কিন্তু শুধু কল্পনা দ্বারা বোঝা যায় তাদেরকে Abstract Noun বলে।
- According to Wren & Martin, An Abstract Noun is usually the name of a quality, action or state considered apart from the object to which it belongs.
- অর্থাৎ, Abstract Noun হলো বস্তু নিরপেক্ষ গুণ, কাজ বা অবস্থার নাম।
- কিছু Abstract Noun হলো- Honesty, justice, childhood, heroism, breadth, length, youth, slavery, bravery, etc.
- উল্লেখ্য যে, Art এবং science এর নামগুলো Abstract Noun হয়।
- যেমন: Music, Grammar, Chemistry, etc.

Source:
1. A Passage to the English Language by S.M. Zakir Hussain.
2. Applied English Grammar And Composition by P.C. Das.

২৩.
Neither of the two men wants ____ son educated.
  1. them
  2. his
  3. their
  4. its
ব্যাখ্যা

• Complete sentence: Neither of the two men wants his son educated.
- Bangla meaning: দুজনের কেউই চান না যে তার ছেলে শিক্ষিত হোক।

• One of, Each of, Either of, Neither of ইত্যাদি singular subjects হিসেবে ব্যবহৃত হয়, তাই এর পরে singular possessive pronoun (his, her, or its) বসে।
- Either দ্বারা দুইয়ের প্রত্যেকটি বুঝানো হয়।
- Neither দ্বারা দুইয়ের কোনটিই নয় বুঝানো হয়।

- প্রদত্ত বাক্যে "men" is masculine gender, তাই সঠিক possessive pronoun টি হবে- his.

অন্য অপশনগুলোর বিশ্লেষণ:
ক) them → "them" হলো object pronoun, not possessive.

গ) their → "their" হলো plural কিন্তু এখানে subject হলো singular.

ঘ) its → "its" ব্যবহৃত হয় non-human subjects (animals, objects) -এর জন্য।

২৪.
She slept very little that night.
Here, the underlined word 'little' is a/an-
  1. Noun
  2. Pronoun
  3. Adjective
  4. Adverb
ব্যাখ্যা

• She slept very little that night.
- Here, the underlined word 'little' is an Adverb.

- Here, 'little' modifies the verb "slept" by describing how much she slept.
- অর্থাৎ, 'little' এখানে "slept" verb টিকে modify করায় adverb হিসেবে কাজ করছে।
- "slept" verb টিকে How much দ্বারা প্রশ্ন করলে উত্তর পাওয়া যায় Very little.

• Little (adverb)
- English Meaning: not much; in only a small quantity or degree: slightly; not at all.
- Bangla Meaning: অতিসামান্য।

• Adverb:
- যেসব word noun বা pronoun ছাড়া অন্য যেকোন parts of speech, বিশেষ করে verb কে modify করে সেগুলোকে adverb বলে।
- Adverb সাধারণত Verb, Adjective কিংবা অন্য কোনো Adverb কে modify করে।
- বাক্যে Verb কে কোথায়, কখন, কীভাবে, কেন, কতটুকু, কতবার, ইত্যাদি দ্বারা প্রশ্ন করলে যে উত্তর পাওয়া যায়, তাই হলো adverb.

অন্যদিকে,
- 'Little' শব্দটি "ছোট; যথেষ্ট নয়; সামান্য পরিমাণে মাত্র" অর্থে- noun, pronoun, adjective হিসেবেও ব্যবহৃত হতে পারে। যেমন:
• Little (noun)
- Example: She felt better after she'd eaten a little.

• Little (pronoun)
- Example: Little has changed.

• Little (adjective)
- Example: He gave a little smile.

Source:
1. Cambridge Dictionary.
2. Merriam-Webster Dictionary.

২৫.
Pick out the correctly spelt word:
  1. Remittance
  2. Remmitance
  3. Remmittance
  4. Rammitance
ব্যাখ্যা

• The correct spelling is - ক) Remittance.

• Remittance (Noun)
- English Meaning: Money that is sent by a foreign worker back to their own country.
- Bangla Meaning: অর্থপ্রেরণ; প্রেরিত অর্থ; প্রবাসী শ্রমিকের পাঠানো অর্থ।

• Ex. Sentence: Bangladesh receive most of its remittances from the middle east.
- Bangla Meaning: বাংলাদেশ তার বেশিরভাগ রেমিট্যান্স মধ্যপ্রাচ্য থেকে পায়।

- অন্যদিকে, বাকি অপশনের word গুলোর spelling ভুল।

Source:
1. Accessible Dictionary by Bangla Academy.
2. Merriam-Webster Dictionary.

২৬.
Who is the heroine character of 'Hamlet'?
  1. Desdemona
  2. Portia
  3. Ophelia
  4. Cordelia
ব্যাখ্যা

• Ophelia is the heroine character of 'Hamlet'.

• Hamlet:
- Shakespeare রচিত tragedy গুলোর মধ্যে Hamlet is one of the most celebrated tragedies in English literature.
- তাঁর অন্যান্য tragedy গুলোর মত এটিও 5acts বিশিষ্ট।
- ১৫৯৯-১৬০১ সালের মধ্যে লেখা এই tragedy টি প্রকাশিত হয় ১৬০৩ সালে।
- এর কেন্দ্রীয় চরিত্র Hamlet ছিলেন prince of Denmark যিনি জার্মানি থেকে নিজ দেশে ফিরে আসে তাঁর বাবার শেষকৃত্যে অংশগ্রহণ করতে এবং জানতে পারে যে তার চাচা Claudius তার মাকে বিয়ে করেছে এবং এই চাচাই তার বাবার খুনী।
- সত্য উদঘাটনের পর বিভিন্ন ঘটনা প্রবাহের মধ্যে দিয়ে tragedy এর কাহিনী সামনে এগিয়ে যায় এবং শেষাংশে Hamlet এর মৃত্যুর মধ্যে দিয়ে এর সমাপ্তি ঘটে।

• Main characters:
- King Hamlet,
- Hamlet (Prince of Denmark),
- Ophelia (Heroine),
- Claudius (Hamlet's uncle),
- Gertrude (Queen),
- Horatio (Loyal and Best friend of Hamlet),
- Polonius (Ophelia's Father),
- Laertes (Ophelia's brother), etc.

• Famous quotations from Hamlet:
- "To be or not to be that is the question."
- "Frailty, thy name is woman."
- "Brevity is the soul of wit."
- "Listen to many, speak to a few."
- "Though this be madness, yet there is method in't."
- "Conscience does make cowards of us all."
- "One may smile, and smile, and be a villain."
- "There's a divinity that shapes our ends,
Rough-hew them how we will."
- "There is nothing either good or bad, but thinking makes it so."
- "There are more things in heaven and earth, Horatio,
Than are dreamt of in your philosophy."

• William Shakespeare (1564-1616):
- William Shakespeare একাধারে একজন English poet, dramatist এবং actor.
- তাকে 'English National Poet' বলা হয়।
- Stratford-upon-Avon -এ জন্মগ্রহণ করেছেন বলে তাকে Bard of Avon বা Swan of Avon বলা হয়।
- তাকে অনেকেই সর্বকালের সর্বশ্রেষ্ঠ নাট্যকার হিসেবে বিবেচনা করেন।
- Shakespeare occupies a unique position in world literature.
- William Shakespeare মূলত তাঁর Drama and Sonnet -এর জন্য পরিচিত।
- তিনি মোট ১৫৪ টি sonnet এবং ৩৭ টি play লিখেছেন।
- এছাড়া তিনি Long narrative poem ও লিখেছেন।

অন্যদিকে,
ক) Desdemona (Heroine) is from Othello.

খ) Portia (Heroine) is from The Merchant of Venice.

ঘ) Cordelia (One of three daughters) is from King Lear.

Source:
1. Britannica.
2. An ABC of English Literature by Dr. M. Mofizar Rahman.

২৭.
Identify the synonym for 'Succumb'.
  1. Conquer
  2. Obdurate
  3. Submit
  4. Endure
ব্যাখ্যা

• The synonym for 'Succumb' is Submit.

• Succumb (Verb)
- English meaning: Fail to resist pressure, temptation, or some other negative force; die from the effect of a disease or injury.
- Bangla Meaning: (প্রলোভন, তোষামোদ ইত্যাদির) বশীভূত হওয়া; দমিয়া যাওয়া; মারা যাওয়া; আত্মসমর্পণ করা।

• Given options:
ক) Conquer - জয় করা; শক্তিবলে দখল করা; কারো ভালোবাসা, প্রশংসা ইত্যাদি অর্জন করা।

খ) Obdurate - একগুঁয়ে; অনমনীয়; অনুশোচনাহীন।

গ) Submit - আনুগত্য/অধীনতা/বশ্যতা স্বীকার করা; অনুবর্তী হওয়া; আত্মসমর্পণ করা; পেশ/দাখিল করা।

ঘ) Endure - দুঃখকষ্ট ভোগ করা; টিকে থাকা; স্থায়ী হওয়া।

Source:
1. Accessible Dictionary by Bangla Academy.
2. Merriam-Webster Dictionary.

২৮.
George Bernard Shaw is the author of-
  1. The Family Reunion
  2. A Farewell to Arms
  3. No Man's Land
  4. Arms and the Man
ব্যাখ্যা

• George Bernard Shaw is the author of 'Arms and the Man'.

• Arms and the Man:
- এটি George Bernard Shaw রচিত একটি জনপ্রিয় নাটক।
- এটি একটি Romantic comedy, যা যুদ্ধ, প্রেম এবং মানব স্বভাবের উপর satire করে।
- এই নাটকটি ১৮৯৪ সালে মঞ্চস্থ হয় এবং ১৮৯৮ সালে প্রকাশিত হয়।
- এই নাটকটির settings হলো- Bulgaria -এর Petkoff household.
- নাটকটি যুদ্ধ এবং প্রেমের বিষয় নিয়ে গড়ে উঠেছে। এতে মূলত যুদ্ধের গৌরব এবং বাস্তবতার মধ্যে একটি বৈপরীত্য তুলে ধরা হয়েছে।
- নাটকের কেন্দ্রবিন্দুতে একজন সৈনিক এবং একজন উচ্চশ্রেণীর মহিলা রয়েছেন, এবং তাদের মধ্যে সম্পর্কের জটিলতা নাটকটিকে কৌতুকপূর্ণ এবং মজাদার করে তোলে।
- এটি George Bernard Shaw -এর রচনা ও নাট্যকর্মের একটি উল্লেখযোগ্য উদাহরণ।

• Main Characters:
- Captain Bluntschli,
- Raina Petkoff,
- Major Sergius Saranoff,
- Major Petkoff,
- Catherine Petkoff, etc.

• ​G. B. Shaw (1856-1950):
- তার পুরো নাম George Bernard Shaw.
- George Bernard Shaw 'Modern period' এর একজন Irish নাট্যকার এবং সাহিত্য সমালোচক।
- তিনি ১৯২৫ সালে নোবেল পুরস্কার পান।
- G.B. Shaw ছিলেন Fabian Society এর একজন সদস্য।
- তাঁর উপাধি হলো - The greatest modern English dramatist এবং তাঁকে The father of modern English literature বলা হয়।

​• Famous Plays of G.B. Shaw:
- Pygmalion (Romantic play),
- Man and Superman (Comedy play),
- Major Barbara (Social satire),
- Mrs. Warren's Profession (play),
- Arms and the Man (Romantic comedy),
- Heartbreak House (comedy play),
- Caesar and Cleopatra (play/tragedy),
- The Doctor's Dilemma (satire drama/play, Epilogue),
​- St. Joan of Arc,
- Candida,
- Geneva,
- You Never Can Tell,
- Androcles and the Lion,
- The Devil’s Disciple,
- Too True to Be Good,
- Widowers’ Houses,
- The Apple Cart,
- Buoyant Billions, etc.

অন্যদিকে,

ক) The Family Reunion is a play by T. S. Eliot.

খ) A Farewell to Arms is a novel by Ernest Hemingway.

গ) No Man's Land is a play by Harold Pinter.

Source:
1. Britannica.
2. Goodreads.

২৯.
He left us waiting for his reply.
Here, 'waiting' is-
  1. Gerund
  2. Participle
  3. Infinitive
  4. Finite verb
ব্যাখ্যা

• He left us waiting for his reply.
- Here, 'waiting' is a Participle.

- Here, "waiting" functions as a present participle (adjective) that modifies the pronoun "us".
- অর্থাৎ, 'waiting' এখানে object "us" কে modify করায় adjective হিসেবে কাজ করছে, তাই এটি present participle.
- "Waiting" functions as an object complement that describes the state of the object "us" after the action of the verb "left".
- অর্থাৎ, verb+ing যখন noun/pronoun কে modify করে তখন তা adjective হিসেবে কাজ করে।
- এখানে বলা হয়েছে, সে আমাদের তার উত্তরের অপেক্ষায় (waiting → ongoing action) রেখে চলে গেল।

• Participle:
- A participle is a verb that ends in -ing (present participle) or -ed, -d, -t, -en, -n (past participle).
- Participles may function as adjectives, describing or modifying nouns/pronouns.
- Participle একই সাথে Verb ও Adjective এর কাজ করে।

• Participle মূলত তিন প্রকার। যথা:
1. Present participle:
- Verb -এর সাথে ing যোগ হয়ে যদি adjective -এর কাজ করে অর্থাৎ, একই সাথে Verb ও adjective -এর কাজ করে, তাহলে তাকে present participle বলে।
- সহজ ভাষায় → present participle হলো Verb + ing = adjective = Verb + adjective কাজ করে।
- Present participle দ্বারা চলমান sense বোঝায়।
- যেমন: I saw a flying kite.

2. Past participle:
- সাধারণত verb এর সাথে -ed যোগ করে তৈরি হয় (যেমন: played, walked), তবে অপ্রচলিত verb এর আলাদা রূপ থাকে (যেমন: eaten, driven, seen)।
- এটি perfect tense এবং passive voice তৈরিতে ব্যবহৃত হয়, এবং adjective হিসেবেও ব্যবহৃত হতে পারে।
- যেমন: The broken house needs fixing.

3. Perfect participle:
- এটি having + past participle দ্বারা তৈরি হয় (যেমন: having eaten, having seen)। এটি এমন বোঝাতে ব্যবহৃত হয় যে, একটি কাজ অন্য কাজের আগে সম্পন্ন হয়েছিল।
- যেমন: Having finished the task, he left.

Source: High School English Grammar and Composition by Wren And Martin.

৩০.
The opposite of 'Spendthrift'-
  1. Wasteful
  2. Disdainful
  3. Tightfisted
  4. Imprudent
ব্যাখ্যা

The opposite of 'Spendthrift'- Tightfisted.

• Spendthrift (Noun, adjective)
- English Meaning: Spending money or resources freely and recklessly; wastefully extravagant.
- Bangla Meaning: অতিব্যয়ী; অপব্যয়ী; অপচেতা; অকৃপণ; মুক্তহন্ত; অপব্যয়ী ব্যক্তি।

• Synonyms:
- Wasteful (অপচয়ী), Extravagant (অপচয়কর), Waster (অমিতব্যয়ী), Prodigal (অপব্যয়ী; অপচয়ী; অমিতব্যয়ী)।
• Antonyms:
- Thrifty (মিতব্যয়ী), Parsimonious (ব্যয়কুণ্ঠ; কৃপণ), Mean (সংকীর্ণমনা), Miserly (কৃপন), Tight-fisted (ব্যয়কুন্ঠ)

অন্যদিকে,
- Disdainful - ঘৃণাপূর্ণ; তাচ্ছিল্যপূর্ণ।
- Imprudent - অবিমৃষ্যকারী; অবিবেচক; অবিচক্ষণ; হঠকারী।

- সুতরাং, অপশনের অর্থ বিবেচনা করে দেখা যায়, The opposite of 'Spendthrift'- Tightfisted.

Source:
1. Accessible Dictionary by Bangla Academy.
2. Merriam-Webster Dictionary.

৩১.
Pick the correct verb form:
Do not let these children ____ in the sun.
  1. have playing
  2. play
  3. to play
  4. playing
ব্যাখ্যা

• Complete sentence: Do not let these children play in the sun.
- Bangla: এই বাচ্চাদের রোদে খেলতে দিও না।

• Causative Verb:

- যে Verb গুলোর সাহায্যে বাক্যের Subject নিজে কাজ না করে অন্যকে দিয়ে কাজ করায় সেই Verb গুলোকে বলা হয় causative verb.
- Have, Get, Help, Let, Make ইত্যাদি হলো বহুল প্রচলিত causative verb.
- এগুলোর সাহায্যে অনেক verb- কে causative verb -এ পরিণত করা যায়।

• Causative Verb হিসাবে 'let' -এর ব্যবহার:
- Let এরপরে কোনো ব্যক্তিবাচক object (Action doer) থাকলে এরপরে verb -এর base form বসে।
- Let এরপরে কোনো বস্তুবাচক object (Action receiver) থাকলে এরপরে be + verb -এর past participle form বসে।

• Structure:
1. Subject + let (any tense) + action doer + verb -এর base form + ext.
2. Subject + let (any tense) + action receiver + be + verb -এর past participle + ext.

- তাই প্রদত্ত শূন্যস্থানে সঠিক verb টি হবে- play.

৩২.
A semi-autobiographical novel, 'Of Human Bondage' was written by-
  1. William Somerset Maugham
  2. William Faulkner
  3. Victor Hugo
  4. Joseph Conrad
ব্যাখ্যা

• A semi-autobiographical novel, 'Of Human Bondage' was written by William Somerset Maugham.

• Of Human Bondage:
- William Somerset Maugham রচিত ‘Of Human Bondage’ হলো একটি semi-autobiographical novel.
- এটি ১৯১৫ সালে প্রকাশিত হয় এবং লেখকের অন্যতম শ্রেষ্ঠ রচনা হিসেবে বিবেচিত।
- এতে মানুষের দুর্বলতা, ভালবাসা ও আত্মনিয়ন্ত্রণ নিয়ে গভীর আলোচনা করা হয়েছে।

• Short Summary:
- এই উপন্যাসে মূল চরিত্র ফিলিপ কেরি (Philip Carey)-এর জীবনকাহিনি বর্ণিত হয়েছে। ছোটবেলায় বাবা-মাকে হারিয়ে সে অনাথ হয়ে যায় এবং তার খোঁড়া পা (clubfoot) থাকার কারণে সবসময় হীনমন্যতায় ভোগে। ফিলিপ জীবনে নানা পথ খুঁজে বেড়ায়—ধর্ম, শিল্প, চিকিৎসা—কিন্তু কোথাও পূর্ণতা খুঁজে পায় না।

- লন্ডনে মেডিকেল ছাত্র থাকাকালীন সবচেয়ে বড় মোড় আসে যখন সে Mildred নামের এক নিষ্ঠুর ও স্বার্থপর waitress -এর প্রেমে পড়ে।মিলড্রেডের সঙ্গে সম্পর্ক তাকে বারবার ভেঙে ফেলে, কিন্তু শেষ পর্যন্ত জীবনের অর্থ ও স্বাধীনতা খুঁজে পেতে সে শিখে নেয়— মানুষ আসলে আবেগ ও আসক্তির দাস।

• Main characters:
- Philip Carey,
- Mildred Rogers,
- Sally Athelny,
- Thorpe Athelny, etc.

• William Somerset Maugham (1874-1965):
- William Somerset Maugham ছিলেন একজন প্রখ্যাত ইংরেজী লেখক, নাট্যকার এবং উপন্যাসিক।
- তিনি চিকিৎসাবিদ্যায় প্রশিক্ষণ নিলেও লেখালেখিকেই পেশা হিসেবে বেছে নেন।
- তাঁর চিকিৎসা অভিজ্ঞতা তার লেখায় গভীর প্রভাব ফেলেছে।
- তবে ১৯১৫ সালে প্রকাশিত তাঁর আত্মজীবনীভিত্তিক উপন্যাস Of Human Bondage তাঁকে প্রকৃত খ্যাতি এনে দেয়।
- তাঁর ছোটগল্পগুলো বিশেষভাবে জনপ্রিয়, যেখানে প্রায়ই উপনিবেশিক পটভূমিতে মানুষের মনস্তত্ত্ব, দুর্বলতা ও সম্পর্ক তুলে ধরা হয়েছে।
- Maugham তাঁর পরিষ্কার ভাষা, বাস্তবধর্মী বর্ণনা ও চরিত্র বিশ্লেষণের জন্য বিখ্যাত ছিলেন।
- তার লেখায় মানব প্রকৃতি, সামাজিক সম্পর্ক, এবং জীবনের জটিলতা সম্পর্কে গভীর অন্তর্দৃষ্টি পাওয়া যায়।

• Notable works (Novels):
- Liza of Lambeth,
- Of Human Bondage,
- The Sacred Flames,
- The Razor's Edge,
- Cakes and Ale,
- The Musician,
- The Moon and Sixpence,
- Lady Frederick, etc.

• Short Stories:
- The Ant and the Grasshopper,
- The Luncheon.

Source:
1. Britannica.
2. SparkNotes.

৩৩.
The news that you heard yesterday is known to all.
Here, the underlined part is a/an-
  1. Noun clause
  2. Relative clause
  3. Co-ordinate clause
  4. Principal clause
ব্যাখ্যা

• The news that you heard yesterday is known to all.
- Here, the underlined part is a Relative clause/adjective clause.

- এখানে, "that you heard yesterday" clause টি "news" noun টিকে modify করছে (by specifying which news is being referred to).
- It answers the question: Which news? → The news that you heard yesterday.

• Structure:
- Main clause: The news is known to all.
- Relative clause: that you heard yesterday (dependent clause describing "news").

• Adjective clause/Relative clause:
- যেসব sub-ordinate clause বাক্যে ব্যবহার হয়ে adjective এর কাজ করে তাদেরকে Adjective clause বলে।
- অর্থাৎ, যে clause টি বাক্যে noun/pronoun -এর পরে বসে ঐ noun/pronoun -কে modify করে তাকে adjective clause বলে।
- Adjective clause -কে Relative clause ও বলা হয়।
- Relative clause গুলো সাধারণত Relative pronoun (that, which, who, whose, whom, why, when) ইত্যাদি দ্বারা শুরু হয়।
- তবে মনে রাখতে হবে, who এবং which দ্বারা গঠিত clause টি যদি cause or purpose বোঝায় তবে সেটি Adverbial Clause হিসেবে বিবেচিত হবে।

- Adjective clause দুইটি স্থানে বসতে পারে:
1. Subject এর post-modifier হিসেবে- (Subject + adjective clause + verb + object).
- যেমন: The house where I grew up is now for sale.
2. Noun এর post-modifier হিসেবে- (Subject + verb + noun + adjective clause).
- যেমন: She wore the dress which was on sale.

• Note:
- Noun -এর পরে That যুক্ত clause টি Noun clause এবং Adjective clause উভয়ই হতে পারে।
• কখন Noun clause?
- Noun বা pronoun -এর apposition হিসেবে সাধারণত News, Hope, Belief, Fact, Rumour, ইত্যাদির পরে Noun Clause বসে।
- Apposition বলতে এমন কিছু বোঝায়, যা কোনো Noun বা pronoun সম্পর্কে অতিরিক্ত তথ্য প্রদান করে।
- এই অতিরিক্ত তথ্য noun/pronoun কে modify করে না। তাই তা adjective clause হবে না।
- যেমন: The news that Rajib got married took everyone by surprise.
- এই বাক্যে That যুক্ত clause টি 'News' সম্পর্কে অতিরিক্ত তথ্য প্রদান করছে, 'News' কে modify করছে না।
- Noun clause এর ক্ষেত্রে অর্থের দিক থেকে লক্ষ্য করলে "এটাই সেটা" এরকম তথ্য পাওয়া যায়।
- যেমন: 'that Rajib got married' টাই এখানে news.
- Noun clause এর ক্ষেত্রে আগের noun phrase টিকে বাদ দিলেও অর্থ ঠিক থাকে, কিন্তু that কে উঠিয়ে দেওয়া যায় না।
- যেমন: That Rajib got married took everyone by surprise.

• কখন Adjective clause?
- যখন noun/pronoun কে modify করে (দোষ, গুণ, সংখ্যা, পরিমাণ, ইত্যাদি বুঝায়) তখন adjective clause হয়।
- যেমন: The news that you heard yesterday is known to all.
- এই বাক্যে That যুক্ত clause টি 'News' কে modify করছে, অর্থাৎ, news কে describe করছে (that you heard yesterday).
- Adjective clause এর ক্ষেত্রে that -এর পরের clause টির অর্থ পরিপূর্ণ হয় না, এবং এক্ষেত্রে that কে উঠিয়ে দেওয়া যায়।
- যেমন: The news you heard yesterday is known to all.

অন্যদিকে,
• Co-ordinate clause:

- Joins two independent clauses by Co-ordinating conjunctions (yet, but, or, otherwise, and).
- যেমন: The news is true, and everyone knows it.

• Principal clause:

- An independent clause that can stand alone.
- যে সকল clause তাদের অর্থ প্রকাশের জন্য অন্য কোনো clause এর উপর নির্ভরশীল নয় তাদের principal clause বলে।
- আধুনিক English Grammar এ Simple sentence কেও clause বলা হয় কারণ Simple sentence গুলাে সর্বদাই principal clause হয়ে থাকে।
- Principal clause কে আবার Main clause বা Independent clause ও বলা হয়।
- যেমন: Because it was raining, we stayed indoors.

৩৪.
______ the day went on, the weather worsened.
  1. Just
  2. As
  3. Unless
  4. So
ব্যাখ্যা

• Complete sentence: As the day went on, the weather worsened.
- Bangla meaning: দিন যতই গড়িয়েছে, আবহাওয়া ততই খারাপ হয়েছে।

- বাক্যটিতে দুটি clause কে যুক্ত করতে এমন একটি conjunction প্রয়োজন যা progression of time দেখায়।
- অর্থাৎ, সময়ের অগ্রগতির সাথে সাথে অন্য clause -এর কাজটিও ঘটে।

- As is used to mean "while" or "during the time that", indicating that two actions are happening simultaneously and one is affecting the other.
- অর্থাৎ, Conjunction হিসেবে As (while; when; during the time that) - যখন; চলাকালীন; যতই অর্থে ব্যবহৃত হয়।
- তাই, এখানে সঠিক উত্তর হবে- As.

• As (conjunction)
- English Meaning: while; when; during the time that.
- Bangla Meaning: যখন; চলাকালীন; যতই।

অন্যদিকে,
ক) Just
- ঠিক; মাত্র; ন্যায্য; যুক্তিযুক্ত ইত্যাদি অর্থে (adjective, adverb) হিসেবে ব্যবহৃত হয়।
- যেমন: This is just what I expected.

গ) Unless
- except if 'যদি না' অর্থে এটি শর্ত বোঝাতে conjunction হিসেবে ব্যবহৃত হয়।
- এটি নিজেই negative অর্থ প্রদান করে।
- এজন্যে unless দ্বারা যে clause শুরু হয় তাতে no বা not বসে না।
- যেমন: Do not punish him unless he behaves roughly.

ঘ) So
- সুতরাং; অতএব; সে-কারণে; সেই জন্য ইত্যাদি অর্থে conjunction হিসেবে ব্যবহৃত হয়।
- It Indicates result of previous clause.
- যেমন: Nobody answered my knock, so I went away.

Source:
1. Accessible Dictionary by Bangla Academy.
2. Merriam-Webster Dictionary.

৩৫.
The term "Pedagogy" refers to-
  1. The method of political rule.
  2. The art or profession of teaching.
  3. The art or science of teaching adults.
  4. The branch of medicine dealing with children.
ব্যাখ্যা

• The term "Pedagogy" refers to- The art or profession of teaching.

• Pedagogy (noun):
- English Meaning: The art, science, or profession of teaching; the study of the methods and activities of teaching.
- Bangla Meaning: শিক্ষণবিজ্ঞান।(আনুষ্ঠানিক) স্কুলশিক্ষক; শিক্ষকতার পেশা।

অন্যদিকে,
• Demagogy:
- English Meaning: the methods or practices of a demagogue; the method of political rule as demagogy.
- Bangla Meaning: বক্তৃতাসর্বস্ব/গলাবাজির রাজনীতি।

• Andragogy:
- English Meaning: The art or science of teaching adults.
- Bangla Meaning: বয়স্কশিক্ষা।

• Pediatric:
- English Meaning: The branch of medicine dealing with children.
- Bangla Meaning: শিশুচিকিৎসা।

Source:
1. Accessible Dictionary by Bangla Academy.
2. Merriam-Webster Dictionary.

৩৬.
A note added at the end of a letter after it is signed is called _____ .
  1. Corrigendum
  2. Nota bene
  3. Postscript
  4. Footnote
ব্যাখ্যা

• A note added at the end of a letter after it is signed is called a Postscript.

• Postscript:
- A note or series of notes appended to a completed letter, article, or book.
- চিঠিতে স্বাক্ষরের পর যুক্ত অত্তিরিক্ত বার্তা বা বাক্যাবলীকে বলা হয় - Postscript.
- একে সংক্ষিপ্ত ভাবে - PS বলে।
- It comes from the Latin - postscriptum, which literally means “written after.”
- যার বাংলা অর্থ- পুনশ্চ, পত্রের পুনশ্চ লিখন।

• অন্যদিকে,
• Corrigendum:
- English Meaning: A thing to be corrected, typically an error in a printed book.
- Bangla Meaning: সংশোধনীয় বিষয়।

• Nota bene:
- English Meaning: —used to call attention to something important.
- Bangla Meaning: (সংক্ষেপ NB) সতর্কতার সঙ্গে লক্ষ করুন; লক্ষণীয়।

• Footnote:
- English Meaning: A note of reference, explanation, or comment usually placed below the text on a printed page.
- Bangla Meaning: পাদটীকা।

৩৭.
Identify the correct sentence:
  1. She insisted with seeing her lawyer.
  2. She insisted in seeing her lawyer.
  3. She insisted on seeing her lawyer.
  4. She insisted to seeing her lawyer.
ব্যাখ্যা

• Correct sentence: She insisted on seeing her lawyer.

• Insist on doing something
- English Meaning: to demand something or say forcefully that you want something.
- Bangla Meaning: কোনো কিছুতে জোর দেয়া বা পীড়াপীড়ি করা।

- Insist on/upon এর পরে noun/gerund (-ing form of a verb) বসে।

More Examples:
- He insisted on my going there.
- She insists on doing everything her own way.

Source:
1. Cambridge Dictionary.
2. Merriam-Webster Dictionary.

৩৮.
'পরিবেশ ও জীব-বৈচিত্র্য সংরক্ষণ ও উন্নয়ন' সংবিধানের কোন অনুচ্ছেদে বর্ণিত আছে?
  1. ১৮ক নং অনুচ্ছেদ
  2. ১৮ নং অনুচ্ছেদ
  3. ২২ নং অনুচ্ছেদ
  4. ২৪ নং অনুচ্ছেদ
ব্যাখ্যা

'পরিবেশ ও জীব-বৈচিত্র্য সংরক্ষণ ও উন্নয়ন' সংবিধানের ১৮ক নং অনুচ্ছেদে বর্ণিত আছে।

সংবিধানের ১৮(ক) নং অনুচ্ছেদ:
- রাষ্ট্র বর্তমান ও ভবিষ্যৎ নাগরিকদের জন্য পরিবেশ সংরক্ষণ ও উন্নয়ন করিবেন এবং প্রাকৃতিক সম্পদ, জীব- বৈচিত্র্য, জলাভূমি, বন ও বন্যপ্রাণির সংরক্ষণ ও নিরাপত্তা বিধান করবেন।

অন্যদিকে -
- গণপ্রজাতন্ত্রী বাংলাদেশের সংবিধানের ১৮ নং অনুচ্ছেদে জনস্বাস্থ্য এবং নৈতিকতা সম্পর্কে বলা হয়েছে।
- গণপ্রজাতন্ত্রী বাংলাদেশের সংবিধানের ২২ নং অনুচ্ছেদে রাষ্ট্রের নির্বাহী বিভাগসমূহ থেকে বিচারবিভাগের পৃথকীকরণের কথা বলা হয়েছে।
- ২৪ নং অনুচ্ছেদ : জাতীয় স্মৃতি নিদর্শন প্রভৃতি।

উৎস: বাংলাদেশের সংবিধান।

৩৯.
বাংলার শেষ নবাব সিরাজউদ্দৌলা কোন যুদ্ধে পরাজিত হয়েছিলেন?
  1. বক্সারের যুদ্ধ
  2. কর্ণাটকের যুদ্ধ
  3. এলাহাবাদের যুদ্ধ
  4. পলাশী যুদ্ধ
ব্যাখ্যা

বাংলার শেষ নবাব সিরাজউদ্দৌলা পলাশী যুদ্ধে পরাজিত হয়েছিলেন।

পলাশী যুদ্ধ:
- নবাব সিরাজউদ্দৌলা ও ইস্ট ইন্ডিয়া কোম্পানির মধ্যে ১৭৫৭ সালের ২৩ জুন যে যুদ্ধ সংঘটিত হয়েছিল তাই পলাশীর যুদ্ধ নামে পরিচিত।
- এ যুদ্ধ আট ঘণ্টার মতো স্থায়ী ছিল।
- প্রধান সেনাপতি মীরজাফরের বিশ্বাসঘাতকতার কারণে নবাব সিরাজউদ্দৌলা কোম্পানি কর্তৃক পরাজিত হন।
- এ যুদ্ধের রাজনৈতিক ফলাফল ছিল সুদূরপ্রসারী ও ধ্বংসাত্মক।
- এর ফলে বাংলায় ব্রিটিশ শাসনের ভিত্তি প্রতিষ্ঠিত হয়।

⇒ ১৭৫৭ খ্রিস্টাব্দে ২৩ জুন ভাগীরথী নদীর তীরে পলাশীর আমবাগানে নবাব সিরাজউদ্দৌলার সঙ্গে ইংরেজ সেনাপতি রবার্ট ক্লাইভের যুদ্ধ হয়।
- এই যুদ্ধে নবাবের পক্ষে ছিলেন দেশপ্রেমিক মীরমদন, মোহন লাল এবং ফরাসি সেনাপতি সিনফ্রে। নবাবের পক্ষে সৈন্যসংখ্যা ছিল প্রায় ৬৫ হাজার।
- ইস্ট ইন্ডিয়া কোম্পানির পক্ষে ছিল মাত্র ৩ হাজার।
- জেতার সব ধরণের সুযোগ সুবিধার পরও নবাব পরাজিত হন তার সেনাপতি মীরজাফরের বিশ্বাসঘাতকতার কারণে।
- যুদ্ধের ফলে মীরজাফরকে বাংলার সিংহাসনে বসালেও প্রকৃত ক্ষমতা ছিল রবার্ট ক্লাইভের হাতে।
- ইংরেজরা বাংলায় একচেটিয়া ব্যবসা-বাণিজ্যের সুযোগ পায়।
- অপরদিকে ফরাসিরা এদেশ ছাড়তে বাধ্য হয়।
- এ ভাবেই এ যুদ্ধে বাংলা তথা ভারতের স্বাধীনতা ভূলুণ্ঠিত হয়।

উল্লেখ্য,
- বাংলার শেষ স্বাধীন নবাব ছিলেন সিরাজউদ্দৌলা।
- তিনি ১৭৫৭ সালের ২৩ শে জুন ইংরেজদের নিকট পলাশী যুদ্ধে পরাজিত হন। এর ফলে বাংলার স্বাধীনতার সমাপ্তি ঘটে।

উৎস: বাংলাদেশের ইতিহাস ও বিশ্বসভ্যতা, এসএসসি প্রোগ্রাম, বাংলাদেশ উন্মুক্ত বিশ্ববিদ্যালয়।

৪০.
জাতীয় শিল্পনীতি ২০২২ অনুসারে, বৃহৎ শিল্পে কতজনের অধিক শ্রমিক কাজ করে?
  1. ২০০
  2. ২৩০
  3. ২৫০
  4. ৩০০
ব্যাখ্যা

জাতীয় শিল্পনীতি:
- সর্বশেষ জাতীয় শিল্পনীতি ২০২২ অনুসারে এসএমই ও অন্যান্য শিল্প প্রতিষ্ঠান/উদ্যোগ এর শ্রেণিবিন্যাস -

⇒ বৃহৎ শিল্প (Large scale industries):
- উৎপাদনের ক্ষেত্রে ‘বৃহৎ শিল্প’ (Large Industry) বলতে সেসব শিল্প প্রতিষ্ঠানকে বোঝাবে যেসব প্রতিষ্ঠানে জমি এবং কারখানা ভবন ব্যতীত স্থায়ী সম্পদের মূল্য প্রতিস্থাপন ব্যয়সহ (Replacement Cost) ৫০ কোটি টাকার অধিক কিংবা তৈরী পোশাক/শ্রমঘন শিল্প প্রতিষ্ঠান ব্যতীত যেসব শিল্প প্রতিষ্ঠানে ৩০০ জনের অধিক শ্রমিক নিয়োজিত রয়েছে। যে সকল তৈরী পোশাক/শ্রমঘন শিল্প প্রতিষ্ঠানের শ্রমিকের সংখ্যা ১০০০ এর অধিক কেবল সে সকল তৈরি পোশাক শিল্প বৃহৎ শিল্পের অন্তর্ভুক্ত হবে।
- সেবা শিল্পের ক্ষেত্রে ‘বৃহৎ শিল্প’ বলতে সেসব শিল্প প্রতিষ্ঠানকে বোঝাবে যেসব প্রতিষ্ঠানে জমি এবং কারখানা ভবন ব্যতিরেকে স্থায়ী সম্পদের মূল্য প্রতিস্থাপন ব্যয়সহ ৩০ কোটি টাকার অধিক কিংবা যেসব শিল্প প্রতিষ্ঠানে ১২০ জনের অধিক শ্রমিক নিয়োজিত রয়েছে।

উৎস: ক্ষুদ্র ও মাঝারি শিল্প ফাউন্ডেশন ওয়েবসাইট।

৪১.
বাংলাবান্ধা স্থলবন্দর কোন জেলায় অবস্থিত?
  1. পঞ্চগড়
  2. নীলফামারী
  3. চাঁপাইনবাবগঞ্জ
  4. দিনাজপুর
ব্যাখ্যা

বাংলাবান্ধা স্থলবন্দর:
- বাংলাবান্ধা স্থলবন্দরটি বাংলাদেশের পঞ্চগড় জেলার তেতুলিয়া উপজেলার বাংলাবান্ধা সীমান্তে অবস্থিত।
- এর বিপরীতে পশ্চিমবঙ্গের জলপাইগুড়ি জেলার ফুলবাড়ী সীমান্ত অবস্থিত।
- স্থলপথে আমদানি রপ্তানি সহজ করার জন্য ১২ জানুয়ারি, ২০০২ সালে বাংলাবান্ধা শুল্ক স্টেশনটিকে স্থলবন্দর ঘোষনা করা হয়।

⇒ বিভিন্ন স্থলবন্দরের নাম ও অবস্থান:
- বেনাপোল স্থলবন্দর: বেনাপোল, শার্শা, যশোর।
- সোনা মসজিদ স্থল বন্দর: চাঁপাইনবাবগঞ্জ।
- হিলি স্থলবন্দর: দিনাজপুর।
- ভোমরা স্থলবন্দর: সাতক্ষীরা।
- বুড়িমারী স্থলবন্দর: পাটগ্রাম, লালমনিরহাট।
- আখাউড়া স্থলবন্দর: আখাউড়া, বাহ্মনবাড়িয়া।
- নাকুগাঁও স্থলবন্দর: নালিতাবাড়ী, শেরপুর।
- তামাবিল স্থলবন্দর: গোয়াইনঘাট সিলেট।
- সোনাহাট স্থলবন্দর: ভুরুঙ্গামারী, কুড়িগ্রাম।
- দর্শনা স্থলবন্দর: দামুরহুদা, চুয়াডাঙ্গা।
- বিলোনিয়া স্থলবন্দর: বিলোনিয়া, ফেনী।

উৎস: বাংলাদেশ স্থলবন্দর কর্তৃপক্ষ।

৪২.
জুলাই ঘোষণাপত্রে জুলাই গণঅভ্যুত্থানের সকল শহীদদের কী নামে আখ্যায়িত করা হয়েছে?
  1. জাতীয় সৈনিক
  2. জুলাই বীর
  3. জাতীয় বীর
  4. জুলাই সৈনিক
ব্যাখ্যা

জুলাই ঘোষণাপত্র:
- ‘জুলাই ঘোষণাপত্র’ হলো ২০২৪ সালের জুলাইয়ের গণ-অভ্যুত্থানের একটি দলিল যার মাধ্যমে জুলাই গণ-অভ্যুত্থানকে রাষ্ট্রীয় ও সাংবিধানিকভাবে স্বীকৃতি দেওয়া হবে।
- অন্যদিকে জুলাই জাতীয় সনদ হলো রাষ্ট্রের বিভিন্ন ক্ষেত্রে সংস্কার প্রস্তাব বাস্তবায়নে ঐকমত্যের একটি রাজনৈতিক দলিল।
- অন্তর্বর্তী সরকারের প্রধান উপদেষ্টা অধ্যাপক মুহাম্মদ ইউনূস ৫ আগস্ট, ২০২৫ তারিখে র ‘৩৬ জুলাই উদ্‌যাপন’ শীর্ষক অনুষ্ঠানে জুলাই ঘোষণাপত্র পাঠ করেছেন।

⇒ জুলাই ঘোষণাপত্রে ২৮টি ধারা অন্তর্ভুক্ত রয়েছে।
- জুলাই ঘোষণাপত্রের ২৪ নং ধারায় জুলাই গণঅভ্যুত্থানের সকল শহীদদের 'জাতীয় বীর' হিসেবে আখ্যায়িত করা হয়েছে।
- ২৪ নং ধারা: সেহেতু বাংলাদেশের জনগণ জুলাই গণ-অভ্যুত্থানের সকল শহীদদের জাতীয় বীর হিসেবে ঘোষণা করে শহীদদের পরিবার, আহত যোদ্ধা এবং আন্দোলনকারী ছাত্রজনতাকে প্রয়োজনীয় সকল আইনি সুরক্ষা দেওয়ার অভিপ্রায় ব্যক্ত করছে।

উৎস: প্রথম আলো।

৪৩.
বর্তমানে বাংলাদেশের চামড়াজাত পণ্যের সবচেয়ে বড় বাজার কোন দেশ? (অক্টোবর ২০২৫)
  1. যুক্তরাষ্ট্র
  2. যুক্তরাজ্য
  3. জার্মানি
  4. স্পেন
ব্যাখ্যা

দ্বিতীয় শীর্ষ রপ্তানি খাত:
- তৈরি পোশাকের পর দ্বিতীয় শীর্ষ রপ্তানি খাত চামড়া ও চামড়াজাত পণ্য।
- রপ্তানি উন্নয়ন ব্যুরোর (ইপিবি) তথ্য অনুযায়ী, ২০২৪-২৫ অর্থবছরে চামড়া ও চামড়াজাত পণ্য রপ্তানি হয়েছে ৩৪ কোটি মার্কিন ডলার।

উল্লেখ্য,
- বাংলাদেশের তৈরি চামড়া ও চামড়াবিহীন জুতা এবং চামড়া পণ্যের সবচেয়ে বড় বাজার যুক্তরাষ্ট্র।
- বিদায়ী ২০২৪-২৫ অর্থবছরে ৩৪ কোটি ডলারের চামড়াজাত পণ্য রপ্তানি হয়েছে। এর মধ্যে যুক্তরাষ্ট্রে ৯ কোটি ডলারের চামড়াজাত পণ্য রপ্তানি হয়েছে। তার বাইরে ভারতে ৭ কোটি ১৯ লাখ, জাপানে ৫ কোটি ৬৩ লাখ ও বেলজিয়ামে ২ কোটি ৮২ লাখ ডলারের চামড়াজাত পণ্য রপ্তানি হয়।
- চামড়া ও চামড়াজাত পণ্যের বাজার বিস্তারের জন্য ২০১৭ সালে ট্যানারি শিল্পের স্থানান্তর করা হয় সাভারের হেমায়েতপুরে।

উৎস: প্রথম আলো। [link]

৪৪.
কত সালে বাংলাদেশ গুমবিরোধী আন্তর্জাতিক সনদে স্বাক্ষর করেছে?
  1. ২০১২ সালে
  2. ২০১৪ সালে
  3. ২০১৮ সালে
  4. ২০২৪ সালে
ব্যাখ্যা

গুমবিরোধী আন্তর্জাতিক সনদ (ICPPED):
- ICPPED-এর পূর্ণরূপ: International Convention for the Protection of All Persons from Enforced Disappearance.
- স্বাক্ষরিত হয়: ২০ ডিসেম্বর, ২০০৬।
- কার্যকর হয়: ২৩ ডিসেম্বর, ২০১০।
- ICPPED জাতিসংঘের আওতাধীন একমাত্র আন্তর্জাতিক কনভেনশন যা এনফোর্স ডিসএপিয়ান্সকে কেন্দ্র করে গৃহীত হয়েছে, যার লক্ষ্য হলো গুম বন্ধের পাশাপাশি এই অপরাধের জন্য দায়মুক্তি বন্ধ করা, ন্যায়বিচার প্রতিষ্ঠা ও ক্ষতিগ্রস্ত ব্যক্তিদের সহায়তা দেওয়া।
- সনদে মোট ৪৫টি অনুচ্ছেদ আছে।
- ৩০ আগস্ট আন্তর্জাতিক গুমবিরোধী দিবস।

⇒ আগস্ট ২৯, ২০২৪ তারিখে বাংলাদেশ গুমবিরোধী আন্তর্জাতিক সনদে স্বাক্ষর করেছে।

উৎস: i) OHCHR ওয়েবসাইট।
ii) UNTC ওয়েবসাইট।

৪৫.
দেশের ইতিহাসে প্রথম নারী শিক্ষা সচিব কে?
  1. রেহানা পারভীন
  2. জোবায়দা আক্তার
  3. সেলিনা বেগম
  4. নাজনিন খাতুন
ব্যাখ্যা

প্রথম নারী শিক্ষা সচিব:
- বাংলাদেশের ইতিহাসে প্রথম নারী শিক্ষা সচিব রেহানা পারভীন।

⇒ শিক্ষা মন্ত্রণালয়ের মাধ্যমিক ও উচ্চশিক্ষা বিভাগের নতুন সচিব হয়েছেন রেহানা পারভীন।
- তিনি এর আগে জাতীয় দক্ষতা উন্নয়ন কর্তৃপক্ষের (এনএসডিএ) নির্বাহী চেয়ারম্যান (সচিব) হিসেবে দায়িত্ব পালন করছিলেন।
- ১৮ আগস্ট, ২০২৫ জনপ্রশাসন মন্ত্রণালয় থেকে প্রজ্ঞাপন জারির মাধ্যমে রেহানা পারভীন আনুষ্ঠানিকভাবে দেশের প্রথম নারী শিক্ষা সচিব হিসেবে দায়িত্ব পেলেন।

উল্লেখ্য,
- শিক্ষা মন্ত্রণালয়কে ২০১৬ সালের নভেম্বরে দুটি বিভাগে ভাগ করা হয়।
- একটি হলো মাধ্যমিক ও উচ্চশিক্ষা বিভাগ এবং অন্যটি কারিগরি ও মাদ্রাসা শিক্ষা বিভাগ।
- ১৯৭১ সালের স্বাধীনতার পর থেকে অবিভক্ত শিক্ষা মন্ত্রণালয়ে মোট ৩৩ জন সিনিয়র সচিব ও সচিব দায়িত্ব পালন করেছেন।
- বিভাগ বিভক্ত হওয়ার পর মাধ্যমিক ও উচ্চশিক্ষা বিভাগে এখন পর্যন্ত সাতজন সিনিয়র সচিব ও সচিব দায়িত্ব পালন করলেও তাদের কেউ নারী ছিলেন না।

উৎস: প্রথম আলো।

৪৬.
ব্যাংক কোম্পানি আইন কত সালে কার্যকর করা হয়?
  1. ১৯৭২ সালে
  2. ১৯৭৬ সালে
  3. ১৯৯১ সালে
  4. ১৯৯৯ সালে
ব্যাখ্যা

ব্যাংক-কোম্পানী আইন:
- ব্যাংক-কোম্পানী আইন ১৯৯১ সালে কার্যকর হয়।

⇒ ব্যাংক কোম্পানী আইন, ১৯৯১ বাংলাদেশে ব্যাংকিং খাতের নিয়ন্ত্রণ, পরিচালনা এবং কার্যক্রম নিয়ন্ত্রণের জন্য প্রণীত একটি আইন।
- এটি ব্যাংক-কোম্পানীগুলোর কার্যক্রম, শেয়ার, পরিচালনা পর্ষদ, লাইসেন্স, নিরীক্ষা এবং বাংলাদেশ ব্যাংকের ক্ষমতার বিষয়ে বিধান প্রদান করে।
- উদ্দেশ্য: ব্যাংক-কোম্পানীগুলোর কার্যক্রম নিয়ন্ত্রণ এবং অর্থনৈতিক স্থিতিশীলতা নিশ্চিত করা এবং জনস্বার্থ রক্ষা এবং ব্যাংকিং ব্যবস্থার স্বচ্ছতা ও দক্ষতা বৃদ্ধি।

উল্লেখ্য,
- ২০২৩ সালে এই আইনের অধিকতর সংশোধন করা হয়েছে, যাতে ব্যাংকিং ব্যবস্থাকে আরও আধুনিক ও স্বচ্ছ করা হয়।

উৎস: বাংলাদেশ ব্যাংক ওয়েবসাইট।

৪৭.
বাংলাদেশ সরকার কত সালে 'ধূমপান ও তামাকজাত দ্রব্য ব্যবহার (নিয়ন্ত্রণ) আইন' প্রণয়ন করে?
  1. ২০০৫ সালে
  2. ২০০৭ সালে
  3. ২০০৮ সালে
  4. ২০১১ সালে
ব্যাখ্যা

ধূমপান ও তামাকজাত দ্রব্য ব্যবহার (নিয়ন্ত্রণ) আইন:
- বাংলাদেশ সরকার ২০০৫ সালে 'ধূমপান ও তামাকজাত দ্রব্য ব্যবহার (নিয়ন্ত্রণ) আইন' প্রণয়ন করে।

⇒ বাংলাদেশ সরকার ২০০৩ সালে বিশ্ব স্বাস্থ্য সংস্থার উদ্যোগে গৃহীত আন্তর্জাতিক চুক্তি এফসিটিসিতে (ফ্রেমওয়ার্ক কনভেনশন অন টোব্যাকো কন্ট্রোল) স্বাক্ষর করে।
- চুক্তির বিধানসমূহ প্রতিপালনে সরকার পরবর্তী সময়ে ২০০৫ সালে তামাক নিয়ন্ত্রণ আইন প্রণয়ন করে।
- এই আইনের ৪ ধারার ১ উপধারায় স্পষ্টভাবে বলা আছে, কোনো ব্যক্তি কোনো পাবলিক প্লেস ও পাবলিক পরিবহনে ধূমপান করতে পারবেন না, অর্থাৎ উন্মুক্ত স্থানে ধূমপান নিষিদ্ধ করা হয়েছে।

উৎস: i) ধূমপান ও তামাকজাত দ্রব্য নিয়ন্ত্রণ আইন, ২০০৫।
ii) প্রথম আলো।

৪৮.
বাংলাদেশের অভিবাসী নারী শ্রমিকদের সর্বাধিক গন্তব্যস্থল কোন দেশ? (অক্টোবর ২০২৫)
  1. সৌদি আরব
  2. সংযুক্ত আরব আমিরাত
  3. জর্ডান
  4. লেবানন
ব্যাখ্যা

বাংলাদেশের অভিবাসী নারী শ্রমিকদের সর্বাধিক গন্তব্যস্থল:
- বাংলাদেশ জনশক্তি কর্মসংস্থান ও প্রশিক্ষণ ব্যুরোর (বিএমইটি) তথ্য মতে, বাংলাদেশের অভিবাসী নারী শ্রমিকদের সবচেয়ে বড় গন্তব্যস্থল মধ্যপ্রাচ্যের দেশগুলো।
- এর মধ্যে অভিবাসী নারী শ্রমিকরা সবচেয়ে বড় গন্তব্যস্থল সৌদি আরব।
- মোট নারী অভিবাসীর ৭২ শতাংশের গন্তব্য হলো সৌদি আরব।

এছাড়াও,
- অভিবাসী নারী শ্রমিকদের ২য় বড় গন্তব্যস্থল জর্ডান (১৮%)।
- অভিবাসী নারী শ্রমিকদের ৩য় বড় গন্তব্যস্থল কাতার (১৮%)।
- কুয়েত ও সংযুক্ত আরব আমিরাতে গন্তব্যের পরিমাণ ১%।

উৎস: BMET ওয়েবসাইট।

৪৯.
বাংলাদেশের সিভিল সার্ভিস (বিসিএস) পরীক্ষা সর্বপ্রথম শুরু হয় -
  1. ১৯৭২ সালে
  2. ১৯৭৩ সালে
  3. ১৯৭৪ সালে
  4. ১৯৭৫ সালে
ব্যাখ্যা

বাংলাদেশ সিভিল সার্ভিস:
- BCS-এর পূর্ণরূপ: বাংলাদেশ সিভিল সার্ভিস (Bangladesh Civil Service)।
- বাংলাদেশ সিভিল সার্ভিসে কর্মকর্তা বা ক্যাডার নিয়োগের পরীক্ষাকে বলা হয় বিসিএস পরীক্ষা (BCS Examination)।
বাংলাদেশ কর্ম কমিশন (Bangladesh Public Service Commission – BPSC) দ্বারা এই পরীক্ষা গৃহীত হয়ে থাকে।

⇒ বাংলাদেশ সিভিল সার্ভিস যা ভারতীয় উপমহাদেশে ব্রিটিশ শাসন আমলের ইম্পেরিয়াল সিভিল সার্ভিস থেকে উদ্ভুত হয়েছে।
- জনগণের ভোটে নির্বাচিত নীতিনির্ধারকদের প্রণীত নীতি মাঠ পর্যায়ে বাস্তবায়নের জন্য বাংলাদেশ কর্ম কমিশন বা বাংলাদেশ পাবলিক সার্ভিস কমিশন (বিপিএসসি) কতৃক নিয়োগকৃত যে বেসামরিক কর্মকর্তা বা কর্মচারিরা কাজ করেন, তাদেরকেই বিসিএস ক্যাডার (BCS Cadre) বলা হয়।
- বাংলাদেশ সিভিল সার্ভিসে নিয়োগ পরীক্ষা গ্রহণের জন্য প্রণীত বিসিএস (বয়স, যোগ্যতা ও সরাসরি নিয়োগের জন্য পরীক্ষা) বিধিমালা-২০১৪ অনুযায়ী বিসিএস-এর নিম্নোক্ত ২৬টি ক্যাডারে উপযুক্ত প্রার্থী নিয়োগের উদ্দেশ্যে কমিশন কর্তৃক ৩ স্তরবিশিষ্ট পরীক্ষা গ্রহণ করা হয়। বাছাই পরীক্ষা হয় তিন ধাপে। ধাপগুলো হলো- প্রিলিমিনারি, লিখিত ও মৌখিক পরীক্ষা।

⇒ বাংলাদেশের সিভিল সার্ভিস (বিসিএস) পরীক্ষা সর্বপ্রথম শুরু হয় ১৯৭৩ সালে। স্বাধীনতার পর সেই বছর বাংলাদেশ সরকারি কর্ম কমিশন (BPSC) প্রথমবারের মতো বিসিএস-এর মাধ্যমে নিয়োগ কার্যক্রম পরিচালনা করে। তবে তখনকার পরীক্ষা ছিল শুধুমাত্র মৌখিক (viva-voce) ভিত্তিক। এরপর পর্যায়ক্রমে লিখিত ও মৌখিক পরীক্ষার সমন্বয়ে পূর্ণাঙ্গ বিসিএস পরীক্ষা চালু হয়।
- বাংলাদেশের প্রথম বিসিএস ক্যাডার মুক্তিযোদ্ধা খন্দকার আবুল কালাম।

উল্লেখ্য,
- ১৯৭২ সালের ডিসেম্বর মাসে বাংলাদেশের সংবিধান গৃহীত হয়। সংবিধান অনুযায়ী বাংলাদেশকে এককেন্দ্রিক রাষ্ট্র ঘোষণা করা হয়। তার ফলে কেন্দ্রীয় পর্যায়ের চাকরির প্রয়োজনীয়তা শেষ হয়ে যায়। সংবিধানে সিভিল সার্ভিস শব্দটা ব্যবহার করা হয় নি, তবে সকল শ্রেণীর সিভিল সার্ভেন্টকে প্রজাতন্ত্রের চাকরিতে নিয়োজিত ব্যক্তি বলে উল্লেখ করা হয়েছে। চাকরি সংক্রান্ত প্রাসঙ্গিক অধ্যায় (১৩৬ নং অনুচ্ছেদে) অন্যান্য বিষয়ের মধ্যে দুটি গুরুত্বপূর্ণ বিষয় আছে। প্রথম, এই অনুচ্ছেদে সিভিল সার্ভিসের সদস্যদের চাকরির শর্তাবলি নিয়ন্ত্রণে প্রয়োজনীয় আইন প্রণয়নের ক্ষমতা সংসদকে দেয়া হয়েছে। দ্বিতীয়, এতে সরকারকে সিভিল সার্ভিস পুনর্গঠন করার এবং সিভিল সার্ভিস সদস্যদের অসুবিধা ঘটতে পারে চাকরির এমন শর্তাবলি পরিবর্তন করারও ক্ষমতা দেয়া হয়েছে।

⇒ পাকিস্তান আমল থেকে উত্তরাধিকার সূত্রে প্রাপ্ত এই সিভিল সার্ভিসকে পুনর্গঠিত করার কাজেও সরকার হাত দেয়। এই লক্ষ্যে সরকার প্রশাসনিক ও চাকরি পুনর্গঠন কমিটি (এএসআরসি, ১৯৭৩) নামে একটি কমিটি গঠন করে। ঢাকা বিশ্ববিদ্যালয়ের উপাচার্য অধ্যাপক এম.এ চৌধুরী ছিলেন এই কমিটির প্রধান। চাকরি পুনর্গঠনে সরকারের ক্ষমতাকে কার্যকারিতা দেয়ার জন্য ১৯৭৫ সালে চাকরি (পুনর্গঠন ও শর্তাবলী) অধ্যাদেশ এবং এতদসংক্রান্ত একটা আইন জারি করা হয়। এই ক্যাডারের রিক্রুটমেন্ট করা হয়েছিল ১৯৭৩ সালে, তবে বিধিবিধান প্রণীত হয়েছিল ১৯৭৬ সালে।

উৎস: i) বাংলাদেশ সরকারী কর্ম কমিশন।
ii) বাংলাপিডিয়া।
iii) প্রথম আলো।

৫০.
রাজনৈতিক দল ও প্রার্থীর আচরণ বিধিমালা, ২০২৫ অনুসারে, নির্বাচনী আচরণ বিধিমালা লঙ্ঘনে সর্বোচ্চ জরিমাণা কত?
  1. ৫০ হাজার টাকা
  2. ৮০ হাজার টাকা
  3. ১ লক্ষ টাকা
  4. ১.৫ লক্ষ টাকা
ব্যাখ্যা

রাজনৈতিক দল ও প্রার্থীর আচরণ বিধিমালা, ২০২৫:
- ‘গণপ্রতিনিধিত্ব আদেশ ১৯৭২ এর সংশ্লিষ্ট অনুচ্ছেদ, যথাযথ কর্তৃপক্ষ কর্তৃক সংশোধন সাপেক্ষে, নির্বাচন কমিশন ‘রিপ্রেজেন্টেশন অব দ্য পিপল অর্ডার, ১৯৭২ (পি.ও নং ১৫৫ অফ ১৯৭২)’ এর আর্টিকেল ৯১বি এর আলোকে রাজনৈতিক দল ও প্রার্থীর আচরণ বিধিমালা-২০২৫ এর একটি খসড়া চূড়ান্ত অনুমোদন দিয়েছে।
- ২৯ জুন, ২০২৫ তারিখে ত্রয়োদশ জাতীয় সংসদ নির্বাচন সামনে রেখে রাজনৈতিক দল ও প্রার্থীর আচরণ বিধিমালা-২০২৫ এর খসড়া চূড়ান্ত করেছে নির্বাচন কমিশন (ইসি)। ‘রাজনৈতিক দল ও প্রার্থীর আচরণ বিধিমালা, ২০০৮’-এর আলোকে এ খসড়া চূড়ান্ত করা হয়েছে। যেখানে সংসদ নির্বাচনে রাজনৈতিক দল ও প্রার্থীদের আচরণ কেমন হবে, তা নিয়ে বেশ কিছু নতুন বিষয় সংযোজন করেছে কমিশন।

• মাইকে গণসংযোগের সময় শব্দের মাত্রা ৬০ ডেসিবেলে রাখতে হবে। প্রচারণার সময় তিন সপ্তাহ থাকছে। টিভিতে সংলাপের সুযোগ রাখা হয়েছে।
• যেসব প্রার্থী শিক্ষাপ্রতিষ্ঠানের সভাপতি বা সদস্য হিসেবে পরিচালনা পর্ষদে থাকবেন বা মনোনীত হয়েছেন বলে সিদ্ধান্ত হয়েছে, প্রার্থিতা চূড়ান্ত হওয়ার পর সেখান থেকে তাদের পদত্যাগ করতে হবে।
• নির্বাচনী আচরণ বিধিমালা লঙ্ঘনে যে নরমাল শাস্তি ছিল, ছয় মাস কারাদণ্ড ও সর্বোচ্চ ৫০ হাজার টাকা জরিমানা, এবার জরিমানা বাড়িয়ে সর্বোচ্চ দেড় লাখ টাকার প্রস্তাব রয়েছে।
• নির্বাচনি প্রচারণায় অপচনশীল দ্রব্য যেমন- রেক্সিন, পলিথিন, প্লাস্টিকসহ পরিবেশের জন্য ক্ষতিকর কোন উপাদানে তৈরি কোন নির্বাচনি প্রচারপত্র, লিফলেট, হ্যান্ডবিল, ফেস্টুন ও ব্যানার ব্যবহার করা যাবে না।
• নির্বাচনে প্রার্থীরা সামাজিক যোগাযোগমাধ্যম ব্যবহার করে নির্বাচনি প্রচার প্রচারণা চালাতে পারবে না। তবে প্রার্থী বা তার এজেন্টের অ্যাকাউন্ট আইডি, ই-মেইল আইডি, সামাজিক যোগাযোগ মাধ্যমের নাম রিটার্নিং অফিসারের নিকট দাখিল করতে হবে।
• প্রার্থীরা নির্বাচনি প্রচারণায় দুপুর ২টা থেকে রাত ৮টা পর্যন্ত মাইক ব্যবহার করতে পারবেন। তবে ৩টির অধিক মাইক্রোফোন বা লাউড স্পিকার ব্যবহার করতে পারবে না।
• মসজিদ, মন্দির, গির্জা বা অন্য কোন ধর্মীয় উপাসনালয়ে কোন প্রকার নির্বাচনী প্রচারণা চালানো যাবে না।

উৎস: i) বাংলাদেশ নির্বাচন কমিশন ওয়েবসাইট।
ii) বাংলাদেশ সংবাদ সংস্থা।

৫১.
কোন মুঘল সম্রাটের শাসনামলে ঢাকা গেইট নির্মিত হয়েছে?
  1. সম্রাট আওরঙ্গজেব
  2. সম্রাট জাহাঙ্গীর
  3. সম্রাট আকবর
  4. সম্রাট বাবর
ব্যাখ্যা

ঢাকা গেইট:
- ঢাকা গেইট ঐতিহাসিক মোগল স্থাপত্য নিদর্শন।
- এটি ঢাকা বিশ্ববিদ্যালয়ের দোয়েল চত্বর এলাকার ঐতিহাসিক স্থাপনা।
- এটি মীর জুমলা গেইট, ময়মনসিংহ গেইট বা রমনা গেইট নামেও পরিচিত ছিল।
- 'ঢাকা গেইট' এর নির্মাতা হলেন 'মীর জুমলা'।
- সম্রাট আওরঙ্গজেবের শাসনামলে ঢাকা গেইট নির্মিত হয়েছে।

উল্লেখ্য,
- মুঘল সম্রাট আওরঙ্গজেবের সময়ে বাংলার গভর্নর হয়ে আসেন মীর জুমলা।
- মীর জুমলা ১৬৬০ থেকে ১৬৬৩ সালের মধ্যে ঢাকা গেইট নির্মাণ করেছিলেন।
- সীমানা চিহ্নিত করতে এবং স্থলপথে শত্রুদের আক্রমণ থেকে রক্ষা করতে এটি নির্মাণ করা হয়।
- সম্প্রতি ঢাকা গেট সংস্কার শেষে নতুন করে উদ্বোধন হয় ঐতিহাসিক ঢাকা গেইট।

উৎস: i) জাতীয় তথ্য বাতায়ন।
ii) বিবিসি বাংলা।

৫২.
১৯৭১ সালে বাংলাদেশের মুক্তিযুদ্ধের পাকিস্তানের আত্মসমর্পণ দলিলটির শিরোনাম কী?
  1. ডিক্লারেশন অব ইন্ডিপেনডেন্স
  2. ইন্সট্রুমেন্ট অব সারেন্ডার
  3. এগ্রিমেন্ট অব বাংলাদেশ
  4. কোনটিই নয়
ব্যাখ্যা

পাকিস্তানের আত্মসমর্পণের দলিল: INSTRUMENT OF SURRENDER 1971
- ১৯৭১ সালে পাকিস্তানের আত্মসমর্পণ দলিলটির শিরোনাম INSTRUMENT OF SURRENDER.
- এটি তিন প্রস্থে প্রস্তুত করা হয়। একটি প্রস্থ ভারত সরকার এবং দ্বিতীয় প্রস্থ পাকিস্তান সরকারের কাছে সংরক্ষিত আছে। তৃতীয় প্রস্থটি রয়েছে ঢাকার শাহবাগে জাতীয় জাদুঘরে।
- ১৯৭১ সালের ১৬ ডিসেম্বর বিকেল পাঁচটা এক মিনিটে রমনা রেসকোর্সে (বর্তমান সোহরাওয়ার্দী উদ্যান) মুক্তিবাহিনী-মিত্রবাহিনী যৌথ কম্যান্ডের পক্ষে লেফটেন্যান্ট জেনারেল জগজিৎ সিং অরোরা এবং পাকিস্তান বাহিনীর পূর্বাঞ্চলীয় কমান্ডের পক্ষে লেফটেন্যান্ট জেনারেল নিয়াজী পাকিস্তানের আত্মসমপর্ণের দলিলে স্বাক্ষর করেন।

উল্লেখ্য,
- ১৬ ডিসেম্বর ১৯৭১ সকালে মানেকশ ভারতের পূর্বাঞ্চল বাহিনীর চিফ অব জেনারেল স্টাফ মেজর জেনারেল জে এফ আর জেকবকে আত্মসমর্পণের দলিল ও আনুষ্ঠানিকতা চূড়ান্ত করার জন্য ঢাকায় পাঠান। ১৬ ডিসেম্বর বিকালে ঢাকার রেসকোর্স ময়দানে (বর্তমান সোহ্রাওয়ার্দী উদ্যান) পাকিস্তান সামরিক বাহিনীর ৯৩ হাজার সৈন্য বিনা শর্তে সম্মিলিত বাহিনীর কাছে আত্মসমর্পণ করে।
- এই আত্মসমর্পণ দলিলে স্বাক্ষর করেন পূর্বাঞ্চলের সম্মিলিত বাহিনী প্রধান লেঃ জেনারেল জগজিত সিং অরোরা ও পাকিস্তান সেনাবাহিনীর পূর্বাঞ্চলীয় অধিনায়ক লেঃ জেঃ এ কে নিয়াজী।
- এই আত্মসমর্পণ অনুষ্ঠানে বাংলাদেশ সরকারের প্রতিনিধিত্ব করেন মুক্তিবাহিনীর উপ-সেনা প্রধান ও বিমান বাহিনী প্রধান গ্রুপ ক্যাপ্টেন এ কে খন্দকার।

এছাড়াও,
- এই অনুষ্ঠানে মুক্তিবাহিনীর নেতৃস্থানীয় ব্যক্তিদের মধ্যে আরও উপস্থিত ছিলেন এস ফোর্স অধিনায়ক লেঃ কর্নেল কে এম সফিউল্লাহ, ২নং সেক্টরের ভারপ্রাপ্ত অধিনায়ক মেজর এ টি এম হায়দার এবং টাঙ্গাইল মুক্তি বাহিনীর অধিনায়ক জনাব কাদের সিদ্দিকী।

উৎস: i) মুক্তিযুদ্ধ -ই - আর্কাইভ।
ii) বাংলাদেশের ইতিহাস ও বিশ্বসভ্যতা, নবম-দশম শ্ৰেণি।
iii) দৈনিক ইত্তেফাক।

৫৩.
ইলিশ মাছ জিআই (ভৌগোলিক নির্দেশক) পণ্য হিসেবে স্বীকৃতি পায় -
  1. ২০১৫ সালে
  2. ২০১৬ সালে
  3. ২০১৭ সালে
  4. ২০১৮ সালে
ব্যাখ্যা

জিআই (GI):
- জিআই (GI) এর পূর্ণরুপ হলো (Geographical indication) ভৌগলিক নির্দেশক।
- জাতিসংঘের সংস্থা WIPO (World Intellectual Property Organization) হলো জিআই পণ্যের স্বীকৃতি দানকারী প্রতিষ্ঠান।
- কোনো একটি দেশের নির্দিষ্ট ভূখণ্ডের মাটি, পানি, আবহাওয়ার প্রেক্ষাপটে সেখানকার জনগোষ্ঠীর সংস্কৃতি যদি কোনো একটি পণ্য উৎপাদনে সবচেয়ে গুরুত্বপূর্ণ ভূমিকা পালন করে, তাহলে সেটিকে সেই দেশের জিআই পণ্য হিসেবে স্বীকৃতি দেওয়া হয়।
- দেশে ভৌগোলিক নির্দেশক পণ্য (নিবন্ধন ও সুরক্ষা) আইন পাস হয় ২০১৩ সালে।
- দেশের প্রথম জিআই পণ্য হিসেবে নিবন্ধন পায় জামদানি।

⇒ ইলিশ মাছ জিআই (ভৌগোলিক নির্দেশক) পণ্য হিসেবে স্বীকৃতি পায় ২০১৭ সালে।
- বাংলাদেশের জিডিপিতে ইলিশ মাছের অবদান ১ শতাংশের বেশি। দেশের মৎস্য উৎপাদনে যার অংশ প্রায় ১১ শতাংশ। বিশ্বের মোট উৎপাদিত ইলিশের ৮০ শতাংশের বেশি আহরিত হয় বাংলাদেশের নদ-নদী, মোহনা ও সাগর থেকে।

উৎস: i) পেটেন্ট, ডিজাইন ও ট্রেডমার্কস অধিদপ্তর ওয়েবসাইট।
ii) প্রথম আলো।

৫৪.
সংবিধানের পঞ্চদশ সংশোধনীর মাধ্যমে কতটি ক্ষেত্রে সংযোজন, পরিমার্জন ও প্রতিস্থাপন আনা হয়েছিল?
  1. ২২টি
  2. ৩৪টি
  3. ৪২টি
  4. ৫৪টি
ব্যাখ্যা

পঞ্চদশ সংশোধনী:
- ২০১১ সালের ৩০শে জুন জাতীয় সংসদে পঞ্চদশ সংশোধনী আইন পাস হয় এবং রাষ্ট্রপতির অনুমোদন হয় ২০১১ সালের ৩ জুলাই।
- সংবিধানে ধর্মনিরপেক্ষতা ও ধর্মীয় স্বাধীনতা পুনর্বহাল করা হয় এবং রাষ্ট্রীয় মূলনীতি হিসেবে জাতীয়তাবাদ, সমাজতন্ত্র, গণতন্ত্র ও ধর্মনিরপেক্ষতার নীতি সংযোজন করা হয়।
- এই সংশোধনীর মাধ্যমে শেখ মুজিবুর রহমানকে জাতির জনক হিসেবে স্বীকৃতি দেওয়া হয়।
- এই সংশোধনীর দ্বারা 'তত্ত্বাবধায়ক সরকার ব্যবস্থা বাতিল' করা হয়।
- জাতীয় সংসদে মহিলাদের জন্য সংরক্ষিত আসন সংখ্যা বিদ্যমান ৪৫-এর স্থলে ৫০ করা হয়।
- সংবিধানে ৭ অনুচ্ছেদের পরে ৭ (ক) ও ৭ (খ) অনুচ্ছেদ সংযোজন করে সংবিধান বহির্ভূত পন্থায় রাষ্ট্রীয় ক্ষমতা দখলের পথ রুদ্ধ করা হয়।

উল্লেখ্য,
- পঞ্চদশ সংশোধনীর মাধ্যমে ৫৪টি ক্ষেত্রে সংযোজন, পরিমার্জন ও প্রতিস্থাপন আনা হয়েছিল।
- পঞ্চদশ সংশোধনীর মাধ্যমে আওয়ামী লীগ সরকার ১৪২ অনুচ্ছেদ থেকে ‘গণভোটের’ বিধান বাদ দিয়েছিল।
- এ ছাড়া পঞ্চদশ সংশোধনীর মাধ্যমে অসাংবিধানিকভাবে রাষ্ট্রক্ষমতা দখলকে রাষ্ট্রদ্রোহ অপরাধ বিবেচনায় নিয়ে সংশ্লিষ্ট ব্যক্তিকে রাষ্ট্রদ্রোহের অপরাধে দোষী সাব্যস্ত করে সর্বোচ্চ শাস্তির বিধানও যুক্ত করা হয়। আগে মেয়াদ শেষ হওয়ার পরবর্তী ৯০ দিনে নির্বাচন করার বিধান থাকলেও পঞ্চদশ সংশোধনীতে পূর্ববর্তী ৯০ দিনের মধ্যে নির্বাচন করার বিধান সংযোজন করা হয়।

উৎস: i) BBC.
ii) প্রথম আলো।

৫৫.
জাতিসংঘ 'সনদ' কার্যকর হয় -
  1. ১৯৪৫ সালের ২৪ অক্টোবর
  2. ১৯৪৪ সালের ২৬ জুন
  3. ১৯৪৫ সালের ২৫ এপ্রিল
  4. ১৯৪৪ সালের ২৪ সেপ্টেম্বর
ব্যাখ্যা

জাতিসংঘের প্রতিষ্ঠা:
- ১৯৪৫ সালের ২৫ এপ্রিল-২৬ জুন ৫০টি দেশের প্রতিনিধিরা সানফ্রান্সিসকো শহরে মিলিত হন।
- ২৬ জুন ১১১টি ধারা সম্বলিত জাতিসংঘ সনদ অনুমোদিত হয়।
- জাতিসংঘ সনদ কার্যকর হয় ১৯৪৫ সালের ২৪ অক্টোবর।
- মোট ৫১টি দেশ মূল সনদে স্বাক্ষর করেছিল।
- এ কারণে এই ৫১টি দেশকে জাতিসংঘের প্রতিষ্ঠাকালীন সদস্য ধরা হয়।

উৎস: রাষ্ট্রবিজ্ঞান-৩, বিএ এবং বিএসএস প্রোগ্রাম, বাংলাদেশ উন্মুক্ত বিশ্ববিদ্যালয়।

৫৬.
বর্তমানে আসিয়ান কতটি সদস্য রাষ্ট্রের সমন্বয়ে গঠিত? (অক্টোবর ২০২৫)
  1. ১০টি
  2. ১১টি
  3. ১২টি
  4. ১৩টি
ব্যাখ্যা

আসিয়ান (ASEAN):
- দক্ষিণ-পূর্ব এশিয়ার আঞ্চলিক সহযোগিতা সংস্থা।
- আসিয়ান (ASEAN) দক্ষিণ-পূর্ব এশিয়ার দশটি দেশের একটি আঞ্চলিক সংস্থা, যা ৮ আগস্ট ১৯৬৭ সালে ব্যাংকক, থাইল্যান্ডে প্রতিষ্ঠিত হয়।
- প্রতিষ্ঠাতা সদস্য: ইন্দোনেশিয়া, মালয়েশিয়া, ফিলিপাইন, সিঙ্গাপুর ও থাইল্যান্ড।
- পরবর্তীতে যোগদানকারী দেশ: ব্রুনাই দারুস সালাম, ভিয়েতনাম, লাওস, মিয়ানমার ও কম্বোডিয়া।
- বর্তমানে আসিয়ান ১০টি সদস্য রাষ্ট্রের সমন্বয়ে গঠিত।
- আসিয়ান অর্থনৈতিক, রাজনৈতিক ও সামাজিক সহযোগিতা বৃদ্ধির লক্ষ্যে কাজ করে যাচ্ছে।

উৎস: ASEAN ওয়েবসাইট।

৫৭.
নিম্নের কোন সংস্থাটি 'Soft Loan Window' নামে পরিচিত?
  1. IMF
  2. IDA
  3. IDB
  4. IFC
ব্যাখ্যা

• IDA:
- IDA (International Development Association) প্রতিষ্ঠিত হয় ২৪ সেপ্টেম্বর, ১৯৬০ সালে।
- এটি সহজ শর্তে ঋণ প্রদান করে, তাই এটি 'International Soft Loan Window' নামে পরিচিত।
- IDA-এর মূল উদ্দেশ্য দারিদ্র্য নিয়ন্ত্রণ এবং বিকাশে সাহায্য করা।
- এটি উন্নত দেশগুলির জন্য অনুকূল শর্তে ঋণ প্রদান করে, যাতে তারা অর্থনৈতিক ও সামাজিক উন্নতি অর্জন করতে সক্ষম হতে পারে।
- বর্তমান সদস্য সংখ্যা: ১৭৫টি।
- সদরদপ্তর: ওয়াশিংটন ডিসি, মার্কিন যুক্তরাষ্ট্র।
- IDA জরুরি সহায়তা প্রদানের জন্য ২০০৭ সালে Crisis Response Window চালু করে।

উৎস: আইডিএ ওয়েবসাইট ও বিশ্বব্যাংক।

৫৮.
'গ্লোবাল ফায়ারপাওয়ার ইনডেক্স ২০২৫ অনুযায়ী', বাংলাদেশের অবস্থান কততম? (অক্টোবর ২০২৫)
  1. ৩৭তম
  2. ৩৫তম
  3. ৩৯তম
  4. ৩৩তম
ব্যাখ্যা

গ্লোবাল ফায়ারপাওয়ার ইনডেক্স (GFP)- ২০২৫:
• সূচক নির্ধারণের প্রধান মানদণ্ড:
- সামরিক ইউনিটের সংখ্যা;
- আর্থিক সক্ষমতা;
- লজিস্টিক দক্ষতা;
- ভৌগোলিক পরিস্থিতি।

• শীর্ষ তিন সামরিক শক্তিধর দেশ:
১. যুক্তরাষ্ট্র – ১ম স্থান (স্কোর: ০.০৭৪৪);
২. রাশিয়া – ২য় স্থান (স্কোর: ০.০৭৮৮);
৩. চীন – ৩য় স্থান (স্কোর: ০.০৭৮৮)।

• বাংলাদেশের অবস্থান:
মোট দেশ: ১৪৫,
- বাংলাদেশের র‌্যাংক: ৩৫তম,
- পাওয়ার ইনডেক্স স্কোর: ০.৬০৬২।

সূত্র: গ্লোবাল ফায়ারপাওয়ার ইনডেক্স (GFP) ওয়েবসাইট।

৫৯.
২০২৬ সালের ফিফা বিশ্বকাপ কোন দেশে অনুষ্ঠিত হবে?
  1. কানাডা
  2. যুক্তরাষ্ট্র
  3. মেক্সিকো
  4. উপরোক্ত সবগুলো
ব্যাখ্যা

ফুটবল বিশ্বকাপ ২০২৬:
- আয়োজক দেশ: ৩টি (মার্কিন যুক্তরাষ্ট্র, কানাডা এবং মেক্সিকো)।
- এটি বিশ্বকাপ ফুটবলের ২৩তম আসর।
- সময়কাল: ১১ জুন, ২০২৬ - ১৯ জুলাই, ২০২৬।
- অংশগ্রহণকারী দেশ: ৪৮টি।
- অনুষ্ঠিত হবে ১০৪টি ম্যাচ।
- তিন দেশের ১৬টি ভেন্যুতে এই ম্যাচ অনুষ্ঠিত হবে।

⇒ FIFA World Cup:
- ফিফা বিশ্বকাপ (ফুটবল বিশ্বকাপ) একটি আন্তর্জাতিক ফুটবল প্রতিযোগিতা।
- এখানে ফিফাভুক্ত দেশগুলোর পুরুষ জাতীয় ফুটবল দল অংশ নেয়।
- ফিফা বিশ্ব ফুটবল নিয়ন্ত্রণকারী সংস্থা।
- ১৯৩০ সালে উরুগুয়েতে প্রথম বিশ্বকাপ প্রতিযোগিতার আয়োজন করা হয়।
- দ্বিতীয় বিশ্বযুদ্ধের কারণে ১৯৪২ এবং ১৯৪৬ এই ২টি বিশ্বকাপের আসর বসেনি।
- সর্বশেষ বিশ্বকাপ অনুষ্ঠিত হয়েছে কাতারে, ২০২২ সালে।
- এখন পর্যন্ত অনুষ্ঠিত হয় ফুটবল বিশ্বকাপের ২২টি আসর।
- ২০২২ এর শিরোপা জয়ী আর্জেন্টিনা।

উৎস: FIFA ওয়েবসাইট।

৬০.
'আন্তর্জাতিক ন্যায়বিচার আদালত' নিম্নের কোথায় অবস্থিত?
  1. যুক্তরাষ্ট্রের নিউইয়র্ক
  2. সুইজারল্যান্ডের জেনেভা
  3. সুইজারল্যান্ডের জুরিখ
  4. নেদারল্যান্ডের হেগ
ব্যাখ্যা

আন্তর্জাতিক আদালত (International Court of Justice - ICJ):
- International Court of Justice (ICJ) বা আন্তর্জাতিক ন্যায়বিচার আদালত ও বলা হয়।
- এটি জাতিসংঘের বিচারিক অঙ্গ এবং আন্তর্জাতিক আইন অনুযায়ী রাষ্ট্রসমূহের মধ্যে বিরোধ নিষ্পত্তি করে।
- ICJ শুধুমাত্র সেই বিরোধগুলি শুনানি করে, যা রাষ্ট্রগুলি স্বেচ্ছায় আদালতে নিয়ে আসে।
- ICJ আন্তর্জাতিক আইন সম্পর্কিত বিরোধ যেমন সীমান্তের সমস্যা, সমুদ্রসীমা, এবং চুক্তির ব্যাখ্যা সমাধান করে।
- এটি নেদারল্যান্ডের হেগ শহরে অবস্থিত।
- বিচারক সংখ্যা ১৫ জন।
- বিচারকরা নয় বছরের জন্য নির্বাচিত হন।
- প্রতি বছর এক তৃতীয়াংশ বিচারক অবসর গ্রহণ করেন।

উৎস: ICJ ওয়েবসাইট।

৬১.
'ট্রয় নগরী' বর্তমানে কোন দেশে অবস্থিত?
  1. ইরাক
  2. গ্রীস
  3. তুরস্ক
  4. ইরান
ব্যাখ্যা

ট্রয় নগরী:
- ইতিহাস বিখ্যাত ট্রয় নগরী বর্তমান তুরস্কের হেসারলিক বা আনাতোলিয়া নামক স্থানে অবস্থিত।
- ঐতিহাসিক ট্রয় নগরীর অস্তিত্ব এবং এর ধ্বংসের ইতিহাস প্রাচীন গ্রীক হোমারের মহাকাব্য ইলিয়াড-এ পাওয়া যায়।
- ট্রয় নগরী ১৯৯৮ সালে ইউনেস্কোর ‘বিশ্ব ঐতিহ্য’ তালিকায় যুক্ত হয়।
- ট্রয়ের যুদ্ধ শুরু খ্রিষ্টপূর্ব ১২৫০ শতকে এবং শেষ খ্রিষ্টপূর্ব ১২৪০ শতকে।
- দীর্ঘ ১০ বছর ধরে চলেছিল যুদ্ধ।
- এই যুদ্ধ ট্রোজান যুদ্ধ নামে পরিচিত।
- যুদ্ধের কারণ ছিল হেলেন নামের এক সুন্দরী মহিলাকে কেন্দ্র করে, যিনি ট্রয়ের রাজা প্রিয়াম এর পুত্র পারিস দ্বারা অপহৃত হন।
- গ্রীক রাজা মেনেলাউস তার স্ত্রীর ফিরিয়ে আনার জন্য ট্রয়ের বিরুদ্ধে যুদ্ধ ঘোষণা করেন।

• ট্রয়ের ঘোড়া (Trojan Horse):
- ট্রয়ের ঘোড়া ছিল গ্রীক বাহিনীর একটি কৌশল। তারা একটি বিশাল কাঠামো, যা একটি ঘোড়ার মতো দেখতে, ট্রয়ের শহরে রেখে যায়। এতে গ্রীক সৈন্যরা লুকিয়ে ছিল। ট্রয়ের বাসিন্দারা এটি উপহার মনে করে শহরে নিয়ে আসে। রাতের বেলায় সৈন্যরা বের হয়ে শহরের দরজা খুলে দেয়, এবং গ্রীক বাহিনী ট্রয় ধ্বংস করে। এটি প্রতারণা ও কৌশলের প্রতীক হয়ে আছে।

উৎস: Britannica ওয়েবসাইট।

৬২.
'World Trade Organization (WTO)' এর প্রতিষ্ঠাকালীন নাম কী ছিল?
  1. General Agreement on Tariffs and Trade
  2. General Assessment on Tariffs and Trade
  3. General Agreement on Tarifics and Trading
  4. General Agreement on Tariffs
ব্যাখ্যা

• WTO:
- WTO এর প্রতিষ্ঠাকালীন নাম General Agreement on Tariffs and Trade (GATT).
- WTO (World Trade Organization) ১ জানুয়ারি ১৯৯৫ সালে প্রতিষ্ঠিত হয়।
- WTO এর বর্তমান সদস্য ১৬৬টি ।
- বাংলাদেশ WTO এর সদস্য হয় ১জানুয়ারি, ১৯৯৫ সালে।
- WTO এর সদর দপ্তর সুইজারল্যান্ড।

উৎস: WTO ওয়েবসাইট ও Britannica.

৬৩.
মিয়ানমারের সশস্ত্র গোষ্ঠী ‘ARSA’ এর পূর্ণরূপ -
  1. Army of Rohingya State Alliance
  2. Arakan Rohingya Salvation Army
  3. Arakan Resistance and Security Army
  4. Armed Rohingya Security Alliance
ব্যাখ্যা

• Arakan Rohingya Salvation Army (ARSA):
- ARSA হল একটি সশস্ত্র রোহিঙ্গা গোষ্ঠী যা মিয়ানমারের রাখাইন রাজ্যে (পূর্বের আরাকান) রোহিঙ্গা জনগোষ্ঠীর স্বার্থ রক্ষার নামে কার্যক্রম চালায়।
- ARSA-আনুমানিক ২০১৩ সালে গঠিত হয়েছিল।
- পূর্বে Harakah al-Yaqin (HaY) নামে পরিচিত ছিল।
- এরা মিয়ানমারে রোহিঙ্গাদের জন্য একটি গণতান্ত্রিক মুসলিম রাষ্ট্র প্রতিষ্ঠার লক্ষ্যে সশস্ত্র তৎপরতা চালিয়ে আসছে।
- ২০১৬ ও ২০১৭ সালে মিয়ানমারের নিরাপত্তা বাহিনীর ওপর হামলা চালায়।
- ২০১৭ সালের আগস্টে ARSA-র হামলার প্রতিক্রিয়ায় মিয়ানমার সেনাবাহিনী ব্যাপক দমন-পীড়ন চালায়, যার ফলে দশ লক্ষাধিক রোহিঙ্গা বাংলাদেশে পালিয়ে আসে।

সূত্র: বিবিসি পত্রিকা রিপোর্ট।

৬৪.
'নোবেল পুরস্কার' বিজয়ী প্রথম নারী কে?
  1. মেরি কুরি
  2. বার্থাভন সুটনার
  3. মেরি কুইন
  4. গ্রাজিয়া দেলেদ্দা
ব্যাখ্যা

মেরি কুরি (Marie Curie):
- নোবেল পুরস্কার বিজয়ী প্রথম নারী মেরি কুরি।
- তিনিই বিশ্বের একমাত্র ব্যক্তি, যিনি বিজ্ঞানের দুই দুইটি শাখায় নোবেল পুরস্কার পেয়েছেন।
- তেজস্ক্রিয়া গবেষণার পথিকৃৎ মেরি কুরি ১৯০৩ সালে পদার্থবিজ্ঞানে এবং ১৯১১ সালে রসায়নে নোবেল পুরস্কার লাভ করেন।
- তিনি ৭ নভেম্বর, ১৮৬৭ সালে পোল্যান্ডের ওয়ারশ শহরে জন্মগ্রহণ করেন।
- ১৮৯১ এর শেষের দিকে মেরি পোল্যান্ড থেকে ফ্রান্সের উদ্দেশে পাড়ি জমান।

অন্যদিকে,
- সাহিত্যে নোবেল জয়ী প্রথম নারী সেলমা লাগেরলফ।
- শান্তিতে প্রথম মহিলা নোবেল বিজয়ী বার্থাভন সুটনার।
- গ্রাজিয়া দেলেদ্দা ১৯২৬ সালে সাহিত্যে নোবেল পুরস্কার লাভ করেন।
- ১৯০১ - ২০২৪ সাল পর্যন্ত মোট ৬৫ জন নারী ৬৬ বার নোবেল পুরস্কার লাভ করেন।
- এর মধ্যে একমাত্র মেরি কুরি যিনি দুইবার নোবেল পুরস্কার লাভ করেন।

উৎস: Nobel Prize ওয়েবসাইট।

৬৫.
'ফোর্টিফাই রাইটস' সংগঠনটি কী বিষয়ে কাজ করে?
  1. মানবাধিকার
  2. পরিবেশ
  3. রাজনৈতিক
  4. অর্থনৈতিক
ব্যাখ্যা

Fortify Rights:
- ফোর্টিফাই রাইটস (Fortify Rights) থাইল্যান্ডভিত্তিক একটি মানবাধিকার সংগঠন।
- এটি দক্ষিণ-পূর্ব এশিয়া এবং বিশ্বজুড়ে মানবাধিকার লঙ্ঘনের বিরুদ্ধে কাজ করে।
- প্রতিষ্ঠিত হয়: ২০১৩ সালে।
- এটি বিশেষভাবে মিয়ানমার, থাইল্যান্ড, এবং অন্যান্য অঞ্চলের মানবাধিকার পরিস্থিতি নিয়ে সক্রিয়ভাবে কাজ করছে।
- সম্প্রতি (মার্চ, ২০২৫] মিয়ানমারের রাখাইন রাজ্যে গৃহযুদ্ধের শিকার বেসামরিক নাগরিকদের মানবিক সহায়তা এবং বাণিজ্যিক কার্যক্রম অব্যাহত রাখতে বাংলাদেশ ও আরাকান আর্মিকে ‘মানবিক করিডর’ দেওয়ার আহ্বান জানিয়েছে ফোর্টিফাই রাইটস।

উৎস: সমকাল পত্রিকা এবং Fortify Rights ওয়েবসাইট।

৬৬.
'বিশ্ব মানবিক ভাতৃত্ববোধ বিষয়ক সম্মেলন-২০২৫' নিচের কোথায় অনুষ্ঠিত হয়েছে?
  1. ভ্যাটিক্যান সিটি
  2. চীন
  3. যুক্তরাজ্য
  4. ফ্রান্স
ব্যাখ্যা

• বিশ্ব মানবিক ভাতৃত্ববোধ বিষয়ক সম্মেলন-২০২৫:
- ২০২৫ সালের ১২-১৩ সেপ্টেম্বর 'বিশ্ব মানবিক ভাতৃত্ববোধ বিষয়ক সম্মেলন-২০২৫' ভ্যাটিক্যান সিটিতে অনুষ্ঠিত হবে।
- বিশ্বমানব ভ্রাতৃত্ব সম্মেলন এক ঐতিহাসিক সমাবেশে পরিণত হতে যাচ্ছে— যা ঐক্য, শান্তি ও সামাজিক ন্যায়বিচারের ভিত্তিতে ভবিষ্যৎ গঠনে বিশ্বনেতা, গণ্যমান্য ব্যক্তি ও চিন্তাবিদদের একত্রিত করবে।
- এই অনুষ্ঠানের কেন্দ্রবিন্দুতে থাকবে মানবতার সারণীর খসড়া, শান্তিপূর্ণ সহাবস্থানের জন্য সর্বজনীন নীতির রূপরেখা। আরও অন্তর্ভুক্তিমূলক ও সহানুভূতিশীল বিশ্বের জন্য পোপ ফ্রান্সিসের দৃষ্টিভঙ্গি দ্বারা অনুপ্রাণিত একটি নতুন মানবসনদকে সংজ্ঞায়িত করার একটি ভিত্তিমূলক দলিল।
এই উপলক্ষে সেন্ট পিটার্স স্কয়ারে একটি বিশাল সমাবেশ আশা করা হচ্ছে, যা অন্যতম বৃহত্তম ইভেন্ট হিসাবে চিহ্নিত হবে। অনুষ্ঠানটিতে মানবভ্রাতৃত্বের নীতিগুলো পুনরায় নিশ্চিত করে একটি বৈশ্বিক কনসার্ট, আলোচনা এবং প্রতীকী মাল্টিমিডিয়া উপস্থাপনাও থাকবে।

উৎস: Fondazione Fratelli tutti ওয়েবসাইট।

৬৭.
'রোমান সাম্রাজ্যের' প্রথম সম্রাট নিম্নের কে ছিলেন?
  1. জুলিয়াস সিজার
  2. অগাস্টাস সিজার
  3. তুজিয়াস সিজার
  4. কোনটি নয়
ব্যাখ্যা

• অগাস্টাস সিজার:
- রোমান সাম্রাজ্যের প্রথম সম্রাট ছিলেন অগাস্টাস সিজার।
- তিনি মহাবীর জুলিয়াস সিজারের ভাগ্নে।
- অগাস্টাস সিজারের আসল নাম ছিল গাইয়াস অক্টাভিয়াস।
- জুলিয়াস সিজারের মৃত্যুর পর তিনি নিজের নাম পরিবর্তন করে অগাস্টাস সিজার রাখেন।
- ৬৩ খ্রিস্টপূর্বাব্দে রোমের সমরনায়ক ও সিনেট সদস্যরা যখন দুই ভাগে বিভক্ত, এমনই এক সময় জন্মলাভ করেন অগাস্টাস সিজার।

⇒ সম্রাট অক্টাভিয়ান অগাস্টাস (খ্রিস্টপূর্ব ৩১-১৪ খ্রিস্টাব্দ) রোমের ইতিহাসে সর্বাপেক্ষা বিখ্যাত শাসক ছিলেন।
- তাঁর শাসনামলে রোমীয় সভ্যতায় স্বর্ণযুগের সূচনা হয়।
- তিনি একজন বিচক্ষণ রাজনীতিক ও দূরদৃষ্টিসম্পন্ন শাসক ছিলেন।
- তাঁর সময়ে রোমীয় ইতিহাস, সাহিত্য-সংস্কৃতি, শিল্পকলা, বিজ্ঞানচর্চা চূড়ান্ত পর্যায়ে পৌঁছে।
- এই জন্য ইতিহাসে তাঁর সময়কালকে 'অগাস্টান যুগ' (Augustan Age) বলা হয়।

উৎস:Britannica ওয়েবসাইট এবং ইসলামের ইতিহাস ও সংস্কৃতি ১ম পত্র, এইচএসসি প্রোগ্রাম, বাংলাদেশ উন্মুক্ত বিশ্ববিদ্যালয়।

৬৮.
'স্ট্যাচু অব লিবার্টি'-এর মূল নকশাকার নিম্নের কে?
  1. ফ্রেডরিক অগাস্ট বার্থোল্ডি
  2. উইলিয়াম নেপোলিয়ন
  3. ফ্রেডরিক থমাস
  4. প্রিয়ালো বার্থো
ব্যাখ্যা

স্ট্যাচু অব লিবার্টি:
- যুক্তরাষ্ট্রের স্বাধীনতার প্রতীক হিসেবে খ্যাত স্ট্যাচু অব লিবার্টি’।
- এটি যুক্তরাষ্ট্রের নিউইয়র্কের লিবার্টি দ্বীপে অবস্থিত।
- যুক্তরাষ্ট্রের স্বাধীনতার শতবর্ষ পূর্তিতে এবং যুক্তরাষ্ট্রের প্রতি ফ্রান্সের বন্ধুত্বের নিদর্শন হিসেবে ভাস্কর্যটি উপহার দিয়েছিল ২৮ অক্টোবর ১৮৮৬ সালে।
- যুক্তরাষ্ট্রের প্রেসিডেন্ট সেদিন আনুষ্ঠানিকভাবে ফ্রান্সের কাছ থেকে স্ট্যাচুটি উপহার হিসেবে গ্রহণ করেন।
- তাই প্রতিবছর ২৮ অক্টোবর ‘স্ট্যাচু অব লিবার্টি’র জন্মদিন পালন করা হয়।
- যুক্তরাষ্ট্র সরকার ১৯২৪ সালে একে জাতীয় স্মৃতিস্তম্ভ হিসেবে ঘোষণা করে।
- ‘স্ট্যাচু অব লিবার্টি’ নামে বিশ্ববাসী মূর্তিটিকে চিনলেও এর প্রকৃত নাম ‘লিবার্টি এনলাইটেনিং দ্য ওয়ার্ল্ড’।
- ‘স্ট্যাচু অব লিবার্টি’র মূল নকশাকার ছিলেন ফ্রান্সের ফ্রেডরিক অগাস্ট বার্থোল্ডি।

এছাড়াও,
- মূর্তিটি একজন নারীর রূপে স্বাধীনতার মূর্তি।
- মূল ভাস্কর্যটির উচ্চতা ১৫১ ফুট, বেদিসহ এর উচ্চতা ৩০৫ ফুট (৯৩ মিটার)।
- এটি একহাত দিয়ে যে বইটি ধরে আছে সে বইয়ের ওপরে লেখা আছে একটি তারিখ, আর তা হল “৪ জুলাই, ১৭৭৬”।এই তারিখেই ব্রিটিশ শাসন থেকে যুক্তরাষ্ট্র স্বাধীন হয়েছিল!

উৎস: Britannica ওয়েবসাইট।

৬৯.
নিম্নের কোন দেশ থেকে 'অস্ট্রেলিয়া' স্বাধীনতা লাভ করে?
  1. কানাডা
  2. যুক্তরাষ্ট্র
  3. যুক্তরাজ্য
  4. ফ্রান্স
ব্যাখ্যা

• অস্ট্রেলিয়া:
- অস্ট্রেলিয়া ওশেনিয়া মহাদেশের একটি সার্বভৌম রাষ্ট্র।
- আয়তনের দিক থেকে এটি ওশেনিয়ার সর্ব বৃহ‌ৎ রাষ্ট্র ও পৃথিবীর ৬ষ্ঠ বৃহত্তম রাষ্ট্র।
- রাজধানী: ক্যানবেরা।
- বিখ্যাত জনবহুল শহর: সিডনি।
- মুদ্রা: অস্ট্রেলিয়ান ডলার।
- সরকার প্রধান: প্রধানমন্ত্রী।
- সিডনিতে প্রধানমন্ত্রীর বাসভবনের নাম: কিরিবিলি হাউস।
- অস্ট্রেলিয়া যুক্তরাজ্য থেকে স্বাধীনতা লাভ করে ১৯০১ সালে।
- ১৯০১ সালে অস্ট্রেলিয়া ব্রিটিশ সাম্রাজ্যের অধীনে থাকা স্বাধীন কমনওয়েলথ দেশ হিসেবে প্রতিষ্ঠিত হয়।

উৎস: Britannica ওয়েবসাইট।

৭০.
'World Government Summit- 2025' নিম্নের কোথায় অনুষ্ঠিত হয়েছে?
  1. সৌদি আরব
  2. সংযুক্ত আরব আমিরাত
  3. ইতালি
  4. জাপান
ব্যাখ্যা

বিশ্ব সরকার সম্মেলন ২০২৫:
- ২০১৩ সালে দুবাইয়ের শাসক মোহাম্মদ বিন রশিদ আল মাকতুমের উদ্যোগে প্রতিষ্ঠিত হয় বিশ্ব সরকার শীর্ষ সম্মেলন।
- সরকারি অভিজ্ঞতা এবং উদ্ভাবন বিনিময়ের একটি বৈশ্বিক প্ল্যাটফর্ম হিসেবে কাজ করছে।
- এই শীর্ষ সম্মেলন সরকার ও জনগণের মধ্যে সংযোগ জোরদার করার জন্য- বৈশ্বিক সংলাপ ও সহযোগিতা বৃদ্ধির পাশাপাশি সরকারগুলোর মধ্যে কার্যকর অংশীদারিত্ব গড়ে তুলতে সহায়তা করে।
- ১১ থেকে ১৩ ফেব্রুয়ারি, ২০২৫ সংযুক্ত আরব আমিরাতের দুবাইতে 'বিশ্ব সরকার সম্মেলন ২০২৫' অনুষ্ঠিত হয়।
- সম্মেলনে বিভিন্ন দেশের নেতৃবৃন্দ, নীতিনির্ধারক ও বিশেষজ্ঞরা বৈশ্বিক সরকারব্যবস্থা, প্রযুক্তি, অর্থনীতি ও পরিবেশসহ বিভিন্ন গুরুত্বপূর্ণ বিষয়ে আলোচনা করেন।
- এই সম্মেলনে অন্তর্বর্তী সরকারের প্রধান উপদেষ্টা অধ্যাপক ড. মুহাম্মদ ইউনূস আমন্ত্রণ পেয়েছিলেন এবং অংশগ্রহণ করেন।

সূত্র- বাসস পত্রিকা রিপোর্ট।

৭১.

    ব্যাখ্যা

    প্রশ্ন:

    সমাধান:

    ৭২.

    1. 0
    2. 2
    3. - 3
    4. 5
    ব্যাখ্যা

    প্রশ্ন:

    সমাধান:

    ৭৩.
    'ALGEBRA' শব্দের বর্ণ গুলোকে কত উপায়ে সাজানো যাবে যাতে A সবসময় প্রথম বর্ণ থাকে?
    1. 920
    2. 720
    3. 5040
    4. 360
    ব্যাখ্যা

    প্রশ্ন: 'ALGEBRA' শব্দের বর্ণ গুলোকে কত উপায়ে সাজানো যাবে যাতে A সবসময় প্রথম বর্ণ থাকে?

    সমাধান:
    'ALGEBRA' শব্দে মোট 7 টি বর্ণ আছে। যথা A, L, G, E, B, R, A
    এখানে A বর্ণটি 2 বার আছে।

    যেহেতু প্রথম স্থান A দিয়ে বাধ্যতামূলকভাবে পূরণ করা হবে, তাই প্রথম স্থানের জন্য কোনো আলাদা বাছাই নেই।

    সুতরাং বাকি 6 টি বর্ণ L, G, E, B, R, A
    এখানে কোনো বর্ণই একাধিকবার নেই (কারণ A দুটির একটি প্রথমে ব্যবহার করায় বাকি 1 টি A আছে, তাই পুনরাবৃত্তি নেই)।

    ∴ বিন্যাস সংখ্যা = 6 টি ভিন্ন বস্তুর বিন্যাস = 6! = 6 × 5 × 4 × 3 × 2 = 720

    ৭৪.
    x - 2y - 8 = 0 এবং 2x + y - 12 = 0 রেখাদ্বয়ের ঢালদ্বয়ের গুণফল কত?
    1. 1/3
    2. - 2
    3. 1/2
    4. - 1
    ব্যাখ্যা

    প্রশ্ন: x - 2y - 8 = 0 এবং 2x + y - 12 = 0 রেখাদ্বয়ের ঢালদ্বয়ের গুণফল কত?

    সমাধান:
    দেওয়া আছে,
    x - 2y - 8 = 0 এবং 2x + y - 12 = 0

    আমরা জানি,
    সরল রেখার সাধারণ সমীকরণ, y = mx + c [যেখানে, m = ঢাল]

    এখন,
    প্রথম রেখার ঢাল:
    x - 2y - 8 = 0 সমীকরণটিকে y = mx + c আকারে সাজালে পাই,
    ⇒ 2y = x - 8
    ∴ y = (1/2)x - 4
    সুতরাং, প্রথম রেখার ঢাল, m1 = 1/2

    আবার,
    দ্বিতীয় রেখার ঢাল:
    2x + y - 12= 0 সমীকরণটিকে y = mx + c আকারে সাজালে পাই,
    ⇒ y = - 2x + 12
    সুতরাং, দ্বিতীয় রেখার ঢাল, m2 = - 2

    ∴ ঢালদ্বয়ের গুণফল = m1 × m2 = (1/2) × (- 2) = - 1
    এই দুটি রেখা পরস্পর লম্ব, কারণ তাদের ঢালদ্বয়ের গুণফল - 1

    ৭৫.
    কোন ত্রিভুজের ১ম কোণ যদি ২য় কোণের চারগুণ এবং ৩য় কোণ যদি ১ম কোণের চেয়ে 63° বড় হয়, তাহলে ৩য় কোণটি কত ডিগ্রি?
    1. 115°
    2. 78°
    3. 52°
    4. 105°
    ব্যাখ্যা

    প্রশ্ন: কোন ত্রিভুজের ১ম কোণ যদি ২য় কোণের চারগুণ এবং ৩য় কোণ যদি ১ম কোণের চেয়ে 63° বড় হয়, তাহলে ৩য় কোণটি কত ডিগ্রি?

    সমাধান:
    ধরি,
    ২য় কোণ = x
    ∴ ১ম কোণ = 4x
    ৩য় কোণ = 4x + 63°

    প্রশ্নমতে,
    x + 4x + 4x + 63° = 180°
    ⇒ 9x = 180° - 63°
    ⇒ 9x = 117°
    ⇒ x = 117°/9
    ∴ x = 13°

    ∴ ৩য় কোণ = 4x + 63 = 52° + 63° = 115°

    ৭৬.
    চিনির মূল্য ৬% বেড়ে যাওয়ায় ১০৬০ টাকার পূর্বে যত কেজি চিনি কেনা যেত এখন তার চেয়ে ৩ কেজি চিনি কম কেনা যায়।পূর্বে চিনির দাম কেজি প্রতি কত ছিল?
    1. ২১.২০ টাকা
    2. ২৫ টাকা
    3. ২০ টাকা
    4. ১৮.২৫ টাকা
    ব্যাখ্যা

    প্রশ্ন: চিনির মূল্য ৬% বেড়ে যাওয়ায় ১০৬০ টাকার পূর্বে যত কেজি চিনি কেনা যেত এখন তার চেয়ে ৩ কেজি চিনি কম কেনা যায়। পূর্বে চিনির দাম কেজি প্রতি কত ছিল?

    সমাধান:
    মনে করি,
    পূর্বমূল্য = ১০০ টাকা
    আবার,
    ১০৬০ টাকার ৬% = ১০৬০ × (৬/১০০) = ৬৩.৬০ টাকা

    বর্তমানে ৩ কেজি চিনির দাম ৬৩.৬০ টাকা
    বর্তমানে ১ কেজি চিনির দাম ৬৩.৬০/৩ = ২১.২০ টাকা

    আবার,
    ৬% বৃদ্ধিতে বর্তমান মূল্য = ১০০ + ৬ = ১০৬ টাকা

    এখন,
    ১০৬ টাকা বর্তমান দর হলে পূর্ব দর = ১০০ টাকা
    ∴ ১ টাকা বর্তমান দর হলে পূর্ব দর = ১০০/১০৬ টাকা
    ∴ ২১.২০ টাকা বর্তমান দর হলে পূর্ব দর = (১০০ × ২১.২০)/১০৬ টাকা
    = ২০ টাকা

    সুতরাং, পূর্বে চিনির দাম কেজি প্রতি ২০ টাকা।

    ৭৭.
    8 + 4√2 + 4 + 2√2+..................... ধারাটির কততম পদ √2?
    1. 6
    2. 4
    3. 8
    4. 5
    ব্যাখ্যা

    প্রশ্ন: 8 + 4√2 + 4 + 2√2+..................... ধারাটির কততম পদ √2?

    সমাধান:
    এটি একটি গুণোত্তর ধারা। যার
    ১ম পদ, a = 8
    এবং সাধারণ অনুপাত, r = 4√2/8 = √2/2 = 1/√2

    আমরা জানি,
    গুণোত্তর ধারার n তম পদ = arn - 1

    প্রশ্নমতে,
    arn - 1 = √2
    ⇒ 8 × (1/√2)n - 1 = √2
    ⇒ (1/√2)n - 1 = √2/8
    ⇒ (1/√2)n - 1 = √2/(√2)6 ; [(√2)6 = 8]
    ⇒ (√2)- (n - 1) = (√2)1 - 6
    ⇒ - (n - 1) = - 5
    ⇒ - n + 1 = - 5
    ⇒ n = 1 + 5
    ∴ n = 6

    অর্থাৎ ৬ষ্ঠ পদটি √2

    ৭৮.
    4, 8 এবং 16 এর জ্যামিতিক গড় কত?
    1. 12
    2. 5
    3. 8
    4. 4
    ব্যাখ্যা

    প্রশ্ন: 4, 8 এবং 16 এর জ্যামিতিক গড় কত?

    সমাধান:
    আমরা জানি,
    n সংখ্যক সংখ্যার গুণোত্তর গড় বা জ্যামিতিক গড় =

    ∴ 4, 8 এবং 16 এর জ্যামিতিক গড় = (4 × 8 × 16)1/3
    = (512)1/3
    = (83)1/3
    = 8

    ৭৯.

    1. 0
    2. 2√2
    3. 4
    4. √2
    ব্যাখ্যা

    প্রশ্ন:

    সমাধান:

    ৮০.
    4 মিটার ব্যাস বিশিষ্ট বৃত্তের অভ্যন্তরে একটি বর্গ অঙ্কিত হলো। বৃত্ত ও বর্গের ক্ষেত্রফলের অনুপাত কত?
    1. π : 2√2
    2. π : 4
    3. 4 : π
    4. π : 2
    ব্যাখ্যা

    প্রশ্ন: 4 মিটার ব্যাস বিশিষ্ট বৃত্তের অভ্যন্তরে একটি বর্গ অঙ্কিত হলো। বৃত্ত ও বর্গের ক্ষেত্রফলের অনুপাত কত?

    সমাধান:
    দেওয়া আছে,
    বৃত্তের ব্যাস =4 মিটার
    বৃত্তের ব্যাসার্ধ, r = 4/2 = 2 মিটার

    আমরা জানি,
    ∴ বৃত্তের ক্ষেত্রফল = πr2
    = π × 22 বর্গমিটার
    = 4π বর্গমিটার

    বর্গের কর্ণের দৈর্ঘ্য = বৃত্তের ব্যাসের দৈর্ঘ্য = 2 × 2 = 4 মিটার
    ∴ বর্গের এক বাহুর দৈর্ঘ্য = 4/√2 = 2√2 মিটার

    ∴ বর্গের ক্ষেত্রফল = (2√2)2 বর্গমিটার = 8 বর্গমিটার

    ∴ বৃত্ত ও বর্গের ক্ষেত্রফলের অনুপাত = 4π : 8
    = π : 2

    ৮১.
    নিচের কোনটি অসামঞ্জস্যপূর্ণ?
    1. Linux
    2. Python
    3. Java
    4. Ruby
    ব্যাখ্যা

    প্রশ্ন: নিচের কোনটি অসামঞ্জস্যপূর্ণ?

    সমাধান:

    • Linux:
    - Linux হলো একটি অপারেটিং সিস্টেম (Operating System) যা কম্পিউটার হার্ডওয়্যার এবং সফটওয়্যার ব্যবস্থাপনা করে।
    - এটি একটি প্ল্যাটফর্ম বা ভিত্তি যেখানে বিভিন্ন সফটওয়্যার রান করতে পারে।
    - Linux নিজেই কোনো প্রোগ্রামিং ভাষা নয়।
    - সাধারণত সার্ভার, ডেস্কটপ, মোবাইল বা এমবেডেড সিস্টেমে ব্যবহৃত হয়।

    • Python:
    - Python হলো একটি প্রোগ্রামিং ভাষা যা সাধারণত সফটওয়্যার ডেভেলপমেন্ট, ডেটা সায়েন্স, ওয়েব ডেভেলপমেন্ট ইত্যাদিতে ব্যবহৃত হয়।
    - এটি একটি ইন্টারপ্রেটেড এবং উচ্চ-স্তরের ভাষা।
    - Python Linux-এর মতো অপারেটিং সিস্টেম নয়।

    • Java:
    - Java হলো একটি প্রোগ্রামিং ভাষা এবং প্ল্যাটফর্ম।
    - এটি সাধারণত অ্যাপ্লিকেশন ডেভেলপমেন্ট এবং ওয়েব সার্ভিসে ব্যবহৃত হয়।
    - Java Linux-এর মতো অপারেটিং সিস্টেম নয়।

    • Ruby:
    - Ruby হলো একটি প্রোগ্রামিং ভাষা যা ওয়েব ডেভেলপমেন্ট, স্ক্রিপ্টিং এবং সফটওয়্যার ডেভেলপমেন্টে ব্যবহৃত হয়।
    - এটি Linux-এর মতো অপারেটিং সিস্টেম নয়।

    সুতরাং, অন্যগুলো প্রোগ্রামিং ভাষা হলেও Linux হলো অপারেটিং সিস্টেম।
    সঠিক উত্তর: ক) Linux.

    ৮২.
    প্রশ্নবোধক স্থানে কোন সংখ্যা বসবে?

    1. 2
    2. 6
    3. 8
    4. 10
    ব্যাখ্যা

    প্রশ্ন: প্রশ্নবোধক স্থানে কোন সংখ্যা বসবে?

    সমাধান:
    প্রথম সারিতে,
    9 + 1 + 5 = 15

    দ্বিতীয় সারিতে,
    4 + 8 + 3 = 15

    তৃতীয় সারিতে,
    2 + 6 + 7 = 15

    প্রত্যেক সারির সংখ্যাগুলোকে যোগ করা হয়েছে যাদের প্রত্যেকের যোগফল 15.

    সুতরাং, প্রশ্নবোধক স্থানে 6 বসবে।

    ৮৩.
    বাংলা বর্ণবিন্যাসে ‘ধ' ব্যঞ্জন বর্ণের অবস্থান হচ্ছে: _______।
    1. ট বর্গের চতুর্থ
    2. চ বর্গের চতুর্থ
    3. ত বর্গের চতুর্থ
    4. প বর্গের চতুর্থ
    ব্যাখ্যা

    প্রশ্ন: বাংলা বর্ণবিন্যাসে ‘ধ' ব্যঞ্জন বর্ণের অবস্থান হচ্ছে: _______।

    সমাধান:
    - বাংলা ব্যঞ্জন বর্ণমালায় বর্গ ৫ টি।
    - এগুলো হলো - ক, চ, ট, ত, প।

    প্রতিটি বর্গে ৫ টি করে বর্ণ আছে। যথা-
    - ক, খ, গ, ঘ, ঙ
    - চ, ছ, জ, ঝ, ঞ
    - ট, ঠ, ড, ঢ, ণ
    - ত, থ, দ, , ন
    - প, ফ, ব, ভ, ম

    - বাংলা বর্ণবিন্যাসে ‘ধ' ব্যঞ্জন বর্ণের অবস্থান ”ত” বর্গের চতুর্থ স্থানে।

    ৮৪.
    যদি 11894 = ARID হয় তাহলে 172194 = ?
    1. ACID
    2. AMID
    3. QUID
    4. QUIT
    ব্যাখ্যা

    প্রশ্ন: যদি 11894 = ARID হয় তাহলে 172194 = ?

    সমাধান:
    যদি 11894 = ARID হয় তাহলে 172194 = QUID

    ইংরেজি বর্ণমালার অবস্থান (A = 1, B = 2,..., Z = 26) বিবেচনা করে দেখা যায়-
    1 = A,
    18 = R,
    9 = I,
    4 = D
    ∴ 11894 = ARID

    একইভাবে,
    17 = Q,
    21 = U,
    9 = I,
    4 = D

    ∴ 172194 = QUID

    ৮৫.
    প্রদত্ত চিত্রে কতগুলো ত্রিভুজ রয়েছে?

    1. 18
    2. 20
    3. 24
    4. 26
    ব্যাখ্যা

    প্রশ্ন: প্রদত্ত চিত্রে কতগুলো ত্রিভুজ রয়েছে?

    সমাধান:
    উপরোক্ত বৃহৎ ত্রিভুজে মোট কতটি ত্রিভুজ আছে
    = pn(n - 1)/2
    = 3 × 4(4 - 1)/2
    = (3 × 12)/2
    = 18

    এখানে,
    p = আনুভূমিক রেখার সংখ্যা
    n = লম্বালম্বি বা তির্যক রেখার সংখ্যা

    ৮৬.
    "তু, য়া, ভা" বর্ণগুলোর সাথে নিচের কোনটি যোগ করে বিন্যাস করলে একটি দেশের নাম পাওয়া যাবে?
    1. সু
    2. ভা
    3. নু

    ব্যাখ্যা

    প্রশ্ন: "তু, য়া, ভা" বর্ণগুলোর সাথে নিচের কোনটি যোগ করে বিন্যাস করলে একটি দেশের নাম পাওয়া যাবে?

    সমাধান:
    "তু, য়া, ভা" বর্ণগুলোর সাথে "নু" বর্ণটি যোগ করে বিন্যাস করলে "ভানুয়াতু" শব্দটি পাওয়া যায়।

    • ভানুয়াতু:
    - ভানুয়াতু হলো দক্ষিণ-প্যাসিফিক মহাসাগরে অবস্থিত একটি দ্বীপ রাষ্ট্র।
    - এটি প্রায় ৮০টি ছোট-বড় দ্বীপ নিয়ে গঠিত।
    - রাজধানী হলো পোর্ট ভিলা।
    - দেশটির প্রধান ভাষা হলো বিসলামা, ইংরেজি ও ফরাসি।

    • মেলানেশিয়া:
    - মেলানেশিয়া হলো দক্ষিণ-প্যাসিফিকের একটি দ্বীপসমূহের অঞ্চল।
    - প্রধান দেশগুলো হলো পাপুয়া নিউ গিনি, ফিজি, সলোমন দ্বীপপুঞ্জ, ভানুয়াতু, ও নিউ ক্যালিডোনিয়া।
    - নামের অর্থ হলো “কালো দ্বীপসমূহ” (মেলা = কালো, নেশিয়া = দ্বীপ)।
    - এখানে মূলত আফ্রো-প্যাসিফিক জাতিগোষ্ঠীর মানুষ বসবাস করে।

    উৎস: World Atlas.

    ৮৭.
    সাবিহা একটি বালিকা লাইনের যেকোন প্রান্ত থেকে ত্রয়োদশ অবস্থানে রয়েছে। ঐ লাইনে কতজন বালিকা আছে?
    1. ২৫ জন
    2. ২১ জন
    3. ২৭ জন
    4. ২৯ জন
    ব্যাখ্যা

    প্রশ্ন: সাবিহা একটি বালিকা লাইনের যেকোন প্রান্ত থেকে ত্রয়োদশ অবস্থানে রয়েছে। ঐ লাইনে কতজন বালিকা আছে?

    সমাধান:
    সাবিহা সামনের দিক এবং পিছনের দিক উভয় দিক থেকেই ১৩তম অবস্থানে রয়েছে।

    ঐ লাইনে বালিকা আছে = ১২ + ১ + ১২ = ২৫ জন

    ৮৮.
    ঘড়িতে ১০ টা ১০ মিনিট বাজলে আয়নার প্রতিবিম্বে কয়টা বাজতে দেখা যাবে?
    1. ৫ টা ১০ মিনিট
    2. ৩ টা ১৫ মিনিট
    3. ২ টা ১৫ মিনিট
    4. ১ টা ৫০ মিনিট
    ব্যাখ্যা

    প্রশ্ন: ঘড়িতে ১০ টা ১০ মিনিট বাজলে আয়নার প্রতিবিম্বে কয়টা বাজতে দেখা যাবে?

    সমাধান:
    আমরা জানি,
    আয়নার সময় = ১১ : ৬০ - প্রকৃত সময়
    = ১১ : ৬০ - ১০ : ১০
    = ১ : ৫০

    সুতরাং, ঘড়িতে ১০ টা ১০ মিনিট বাজলে আয়নার প্রতিবিম্বে ১ টা ৫০ মিনিট বাজতে দেখা যাবে।

    ৮৯.
    একটি বিয়ের অনুষ্ঠানে আনিছ সাহেব ও তাঁর স্ত্রী, তিন পুত্র ও তাদের স্ত্রী এবং প্রত্যেক পুত্রের ৩ জন করে সন্তান ছিলেন। ঐ অনুষ্ঠানে মোট কতজন উপস্থিত ছিলেন?
    1. ২০ জন
    2. ২৪ জন
    3. ১৭ জন
    4. ১৬ জন
    ব্যাখ্যা

    প্রশ্ন: একটি বিয়ের অনুষ্ঠানে আনিছ সাহেব ও তাঁর স্ত্রী, তিন পুত্র ও তাদের স্ত্রী এবং প্রত্যেক পুত্রের ৩ জন করে সন্তান ছিলেন। ঐ অনুষ্ঠানে মোট কতজন উপস্থিত ছিলেন?

    সমাধান:
    মোট লোক = আনিছ সাহেব + তাঁর স্ত্রী + তাদের তিন পুত্র + তিন পুত্রের স্ত্রী + পুত্রদের মোট ৯ সন্তান
    = ১৭ জন।

    ∴ বিয়ের অনুষ্ঠানে মোট উপস্থিত ছিলেন ১৭ জন।

    ৯০.
    The voltage across a 1.1 KW toaster that produces a current of 10 A is :
    1. 11 kV
    2. 1100 V
    3. 110 V
    4. 11 V
    ব্যাখ্যা

    ৯১.
    An electric iron draws 2 A at 120 V. Find its resistance.
    1. 240 Ω
    2. 120 Ω
    3. 60 Ω
    4. 30 Ω
    ব্যাখ্যা

    ৯২.

    Find the current across the resistance.
    1. 2 mA
    2. 10 mA
    3. 6 mA
    4. 12 mA
    ব্যাখ্যা

    ৯৩.

    Find the voltage across the 6 Ω resistance from the circuit.
    1. 2i
    2. - 4i
    3. -6i
    4. 8i
    ব্যাখ্যা

    ৯৪.

    The current io and voltage vo from the circuit
    1. 6 A , 20 V
    2. 3 A , 24 V
    3. 6 A , 15 V
    4. 6 A , 24 V
    ব্যাখ্যা

    ৯৫.
    In an R-C circuit with an AC supply, which of the following components will cause the current to lead the voltage?
    1. Resistor
    2. Inductor
    3. Capacitor
    4. All of the above
    ব্যাখ্যা

    Explanation:

    In an R-C circuit with an AC supply, the current leads the voltage across the capacitor. This happens because the voltage across a capacitor lags the current due to the nature of the capacitor charging and discharging in response to the AC signal.

    Why the others are wrong:

    ক) Resistor: In a purely resistive circuit, the current and voltage are in phase.
    খ) Inductor: In a purely inductive circuit, the current lags the voltage by 90 degrees.
    ঘ) All of the above: Not all components cause the current to lead the voltage. Only the capacitor does that.

    ৯৬.

      ব্যাখ্যা

      ৯৭.
      Which of the following statements is true regarding Ohm's Law?
      1. Ohm's Law applies only to DC circuits
      2. Ohm's Law applies only to resistive circuits.
      3. Ohm's Law applies to both DC and AC circuits but with impedance replacing resistance in AC circuits.
      4. Ohm's Law does not apply to circuits with inductors or capacitors.
      ব্যাখ্যা

      Explanation:

      Ohm's Law is fundamental for both DC and AC circuits. In DC circuits, it states that the voltage across a resistor is directly proportional to the current. In AC circuits, resistance is replaced by impedance (Z), which accounts for both resistive and reactive components (inductors and capacitors).
      Why the others are wrong:

      ক) Ohm's Law applies only to DC circuits: This is incorrect because Ohm’s Law is applicable to both DC and AC circuits, although in AC circuits, impedance replaces resistance.
      খ) Ohm's Law applies only to resistive circuits: Ohm’s Law applies to all types of circuits (resistive, inductive, and capacitive), but for non-resistive circuits, impedance is used in place of resistance.
      ঘ) Ohm's Law does not apply to circuits with inductors or capacitors: This is incorrect because Ohm’s Law applies to all linear circuits, including those with inductors and capacitors, but the relationship involves impedance in AC circuits.

      ৯৮.
      In nodal analysis, what does the voltage at a node represent?
      1. The potential difference between the node and the ground.
      2. The total current entering the node.
      3. The sum of all voltages around the node.
      4. The power delivered to the node.
      ব্যাখ্যা

      Explanation:

      In nodal analysis, the voltage at each node represents the potential difference between that node and the ground (reference node). Nodal analysis uses KCL to write equations for each node in terms of the node voltages.
      Why the others are wrong:

      খ) The total current entering the node: This refers to Kirchhoff’s Current Law (KCL), not the voltage at the node.
      গ) The sum of all voltages around the node: This is incorrect, as the sum of voltages is described by Kirchhoff’s Voltage Law (KVL).
      ঘ) The power delivered to the node: This is unrelated to the node voltage. Power is calculated using the voltage and current (P = VI), not just the node voltage.

      ৯৯.
      In an RC low-pass filter, at frequencies above the cut-off frequency fcf_cfc​, the impedance of the capacitor:
      1. Increases, causing the signal to attenuate.
      2. Decreases, allowing the signal to pass.
      3. Becomes infinite, blocking the signal entirely.
      4. Remains constant, unaffected by frequency
      ব্যাখ্যা

      Explanation:

      In an RC low-pass filter, the capacitor’s impedance increases at higher frequencies, making it harder for high-frequency signals to pass. This causes the filter to attenuate signals above the cut-off frequency fcf_cfc​. Below fcf_cfc​, the impedance of the capacitor is low, allowing low-frequency signals to pass.
      Why the others are wrong:

      খ) Decreases, allowing the signal to pass: This is true for a high-pass filter, not a low-pass filter.
      গ) Becomes infinite, blocking the signal entirely: The capacitor never becomes infinite unless it is open-circuited, but it does block higher frequencies by increasing impedance.
      ঘ) Remains constant, unaffected by frequency: This is incorrect because the impedance of the capacitor depends on the frequency in a low-pass filter.

      ১০০.
      What is the key characteristic of a Permanent Magnet (PM) Stepper Motor?
      1. It uses a permanent magnet to generate the rotor’s magnetic field
      2. It has a rotor that is made of soft iron with no magnetization
      3. It requires an external magnetic field to operate
      4. It has a rotor made from a combination of permanent magnets and electromagnets
      ব্যাখ্যা

      Explanation:

      ক is correct because in a Permanent Magnet Stepper Motor, the rotor contains a permanent magnet. This allows the rotor to align with the magnetic field generated by the stator coils as they are energized, causing the rotor to step forward.
      খ is incorrect because this describes a Variable Reluctance (VR) stepper motor, where the rotor is made of soft iron and does not use permanent magnets.
      গ is incorrect because a Permanent Magnet (PM) stepper motor does not require an external magnetic field to operate. The rotor's magnetic field is generated by the permanent magnet embedded in the rotor.
      ঘ is incorrect because a hybrid stepper motor, not a PM stepper, has a combination of permanent magnets and electromagnets in the rotor.

      ১০১.
      What does a transformer do?
      1. Converts DC to AC
      2. Converts electrical energy to mechanical energy
      3. Changes the voltage level of AC electricity
      4. Regulates the current
      ব্যাখ্যা

      Explanation: A transformer is used to change the voltage level of alternating current (AC) electricity, either stepping it up or stepping it down.
      Why not other options?
      - A. A transformer works only with AC, not DC.
      - B. A transformer does not convert electrical energy into mechanical energy.
      - D. Current regulation is done by other devices.

      ১০২.
      In a DC motor, what causes the back EMF?
      1. The magnetic field produced by the stator
      2. The current flowing through the armature
      3. The rotation of the armature in the magnetic field
      4. The applied voltage
      ব্যাখ্যা

      Explanation:
      In a DC motor, the back electromotive force (back EMF) is generated by the rotation of the armature within the magnetic field produced by the stator (the fixed magnet or electromagnet). As the armature rotates, it cuts through the magnetic flux lines, which induces a voltage (back EMF) opposing the applied voltage according to Faraday's Law of Induction.

      This back EMF acts as a form of resistance to the applied voltage and increases with the speed of rotation. The faster the armature turns, the higher the back EMF. This back EMF limits the motor's speed and controls the current flowing through the motor.

      Why the other options are incorrect:
      ক) The magnetic field produced by the stator: The stator’s magnetic field is essential for motor operation, but it does not directly cause the back EMF. The back EMF is caused by the armature's motion in the magnetic field.
      খ) The current flowing through the armature: While the current flowing through the armature is responsible for producing the torque that causes rotation, it does not directly cause the back EMF. In fact, the back EMF is a result of the armature's rotation, and it opposes the current flow.
      ঘ) The applied voltage: The applied voltage is what causes the motor to run by driving current through the armature. However, the back EMF is a response to the rotation of the armature and is opposite in direction to the applied voltage.

      ১০৩.
      What is the main characteristic of a single-phase electrical system?
      1. It uses two alternating currents that are 180° out of phase with each other
      2. It uses one alternating current that alternates in a sinusoidal waveform
      3. It requires a neutral wire
      4. It uses three alternating currents that are 120° out of phase with each other
      ব্যাখ্যা

      Detailed Explanation:

      ক is incorrect because a system with two alternating currents that are 180° out of phase with each other describes a two-phase system, not a single-phase system. This is not a common setup for power distribution.
      খ is correct because a single-phase electrical system operates with just one alternating current (AC) that alternates in a sinusoidal waveform. This is the most common form of AC power used in households and small businesses.
      গ is incorrect because a neutral wire is not strictly required for the system to function. While a neutral wire is used for safety and to complete the circuit in most cases, the system can operate without it in certain configurations, like in a "two-wire" system.
      ঘ is incorrect because this describes a three-phase system, where three alternating currents are 120° out of phase with each other. This is used in high-power industrial applications because it provides a more stable and continuous power flow.

      ১০৪.
      In a single-phase system, how is power typically delivered to a load?
      1. Only through the live wire
      2. Through the neutral and live wire
      3. Through the earth wire and live wire
      4. Only through the neutral wire
      ব্যাখ্যা

      Detailed Explanation:

      ক is incorrect because power cannot flow effectively through just the live wire. The live wire carries the alternating current to the load, but for the current to return to the source, a neutral wire is also needed to complete the circuit.
      খ is correct because, in a typical single-phase system, power is delivered through both the live wire (also known as the "hot" wire) and the neutral wire. The live wire carries the current to the load, and the neutral wire provides a return path for the current, ensuring the circuit is complete.
      গ is incorrect because the earth wire (or ground wire) is a safety feature, not part of the power delivery system. It is used to prevent electric shock hazards by directing any stray current to the ground, but it does not carry the operational current in the circuit.
      ঘ is incorrect because only the neutral wire cannot provide power. It is required for current to return to the source, but the live wire is necessary for the current to flow to the load in the first place.

      ১০৫.
      What is the function of a starter in a DC motor?
      1. To regulate the current
      2. To limit the starting current
      3. To reduce the speed
      4. To increase the speed
      ব্যাখ্যা

      Explanation:
      A starter is used in a DC motor to limit the high starting current that occurs when the motor is first turned on. Without a starter, the motor could draw a very high current, potentially damaging the motor or the power supply. The starter helps control this inrush current and allows the motor to start safely.
      Why not other options?

      ক) To regulate the current

      While a starter does help manage the current during startup, its primary function is not to regulate the current continuously. The starter's main job is to limit the inrush or starting current, not to regulate it throughout the operation of the motor. After the motor has started, it typically operates under steady-state conditions, and the current is controlled by the motor's load and other factors, not the starter.
      গ) To reduce the speed

      The starter does not affect the speed of the motor once it is running. In fact, the speed of a DC motor is primarily controlled by the applied voltage, field strength, and load conditions, not by the starter. The starter is concerned only with the current at startup, not speed reduction.
      ঘ) To increase the speed

      Similarly, a starter does not increase the speed of the motor. It does not influence the motor's speed directly. The speed of a DC motor is determined by factors such as the applied voltage and the armature's load, not the starter. The starter is focused on ensuring safe operation by limiting the initial surge of current when the motor is started.

      ১০৬.
      How does armature reaction affect the performance of a DC generator?
      1. It improves voltage generation
      2. It causes voltage drop
      3. It has no effect
      4. It increases the efficiency
      ব্যাখ্যা

      Explanation:

      Armature reaction refers to the impact of the magnetic field produced by the current flowing through the armature windings on the main magnetic field of the DC generator. This effect has several consequences:

      Voltage Drop: The armature reaction distorts the main magnetic field in a DC generator, leading to a decrease in the effective flux available for generating voltage. As a result, there is a voltage drop, especially under load conditions. The generator's output voltage becomes lower due to this interference between the armature and the main field.
      Other Effects:

      Distortion of the magnetic field: This can cause the flux to become uneven across the armature, which can lead to increased losses and reduced efficiency.
      Commutator Sparking: Armature reaction can also cause commutator sparking, leading to wear and tear on the commutator and brushes.
      Why not the other options?
      ক) It improves voltage generation:
      Armature reaction does not improve voltage generation. In fact, it reduces the voltage output due to the distortion of the magnetic field.
      গ) It has no effect:
      This is incorrect because armature reaction definitely affects the performance of a DC generator, particularly by causing a voltage drop.
      ঘ) It increases the efficiency:
      Armature reaction tends to reduce the efficiency of a DC generator rather than increase it, mainly due to increased losses and the resulting voltage drop.

      ১০৭.
      How does the power factor of a synchronous motor change with varying excitation?
      1. It improves with increased excitation
      2. It decreases with increased excitation
      3. It remains unchanged
      4. It becomes negative
      ব্যাখ্যা

      Explanation:
      In a synchronous motor, the power factor is closely linked to the excitation (the field current) of the motor. Here's how it works:

      Increased Excitation (Overexcited Condition):
      When the excitation is increased (i.e., the field current is increased), the motor becomes overexcited. This means the motor produces more magnetizing flux than needed for synchronous operation, which results in the motor operating with a leading power factor. This means the motor draws less reactive power from the supply, improving the power factor.
      Decreased Excitation (Underexcited Condition):
      When the excitation is decreased (i.e., the field current is reduced), the motor becomes underexcited. This leads to the motor operating with a lagging power factor, meaning the motor draws more reactive power and the power factor decreases.
      No Excitation:
      If excitation is completely lost, the motor would behave like an induction motor, and the power factor would be very poor (lagging).
      Why not the other options?
      খ) It decreases with increased excitation:
      This is incorrect. As mentioned, increased excitation leads to a leading power factor, which improves, not decreases.
      গ) It remains unchanged:
      This is not true, because the power factor changes significantly with varying excitation.
      ঘ) It becomes negative:
      The power factor doesn't become negative under normal operating conditions for a synchronous motor. A negative power factor would imply that the motor is consuming reactive power in such a way that it is acting as a source of power rather than a load. While an overexcited motor has a leading power factor, it does not typically lead to a negative power factor

      ১০৮.
      What does a transformer do when it is under load?
      1. It increases the efficiency
      2. It produces more heat
      3. It steps up the voltage
      4. It reduces the output voltage
      ব্যাখ্যা

      Explanation:
      When a transformer is under load, the following occurs:

      Increased Heat Production:

      Load current increases when the transformer is under load, leading to higher I²R losses (resistive losses in the windings), which generates heat.
      The core losses (hysteresis and eddy current losses) also contribute to the heat produced, but these are relatively constant and do not change significantly with load.
      The heat generated due to the increased current can affect the transformer's efficiency and operational lifespan if not managed properly (e.g., through cooling).
      Why not the other options?
      ক) It increases the efficiency:
      Under load, a transformer does not necessarily increase its efficiency. The efficiency depends on various factors like the quality of the transformer, losses, and load conditions. In fact, at higher loads, the transformer might experience more losses due to heat generation, which can reduce efficiency.
      গ) It steps up the voltage:
      A transformer steps up or steps down voltage based on the turns ratio of its primary and secondary windings. This action is independent of whether the transformer is under load or not. The voltage is stepped up or stepped down continuously, but under load, there might be a slight voltage drop due to the increased current.
      ঘ) It reduces the output voltage:
      While there can be a slight voltage drop at full load due to the impedance of the windings, the primary role of a transformer is to maintain the desired output voltage according to the turns ratio. It does not intentionally reduce the output voltage under load unless the load exceeds the transformer's capacity.

      ১০৯.
      What is the main cause of eddy current losses in the transformer core?
      1. Varying magnetic flux in the core
      2. Resistance of the windings
      3. Short-circuit current
      4. Overloading of the transformer
      ব্যাখ্যা

      Explanation:
      Eddy current losses in a transformer core are caused by the varying magnetic flux in the core, which induces circulating currents (eddy currents) in the core material itself. Here's how it works:

      Varying Magnetic Flux:
      The transformer operates based on alternating current (AC), and as the current in the primary winding changes direction, it creates a varying magnetic flux in the core. According to Faraday's Law of Induction, this varying magnetic flux induces circulating currents within the conductive material of the core, known as eddy currents.
      Eddy Current Losses:
      Eddy currents flow in closed loops within the core and cause energy dissipation in the form of heat. These losses are called eddy current losses. The intensity of these losses depends on factors such as the frequency of the AC supply, the material of the core, and the thickness of the core laminations (laminated cores are used to minimize eddy current losses by restricting the path of these currents).
      Why not the other options?
      খ) Resistance of the windings:
      The resistance of the windings primarily contributes to copper losses (I²R losses), not eddy current losses. Eddy currents are related to the core material and the magnetic flux, not the winding resistance.
      গ) Short-circuit current:
      Short-circuit currents are abnormal conditions that result in excessive current flow, but they are not the cause of eddy current losses. They can lead to overheating, but they don’t directly cause eddy currents in the core.
      ঘ) Overloading of the transformer:
      Overloading the transformer can lead to increased losses, including copper losses and core losses, but it does not directly cause eddy current losses. The cause of eddy current losses is the varying magnetic flux in the core, not the load conditions.

      ১১০.
      In a Variable Reluctance (VR) Stepper Motor, what drives the rotor to rotate?
      1. The permanent magnet field generated by the stator
      2. The magnetic field generated by electromagnets in the rotor
      3. The rotor’s reluctance to the changing magnetic field
      4. The rotor’s fixed magnet that interacts with a static field
      ব্যাখ্যা

      Explanation:

      ক is incorrect because in a Variable Reluctance (VR) stepper motor, the stator generates a magnetic field, but it does not involve permanent magnets. The rotor responds to the changing magnetic field due to its reluctance.
      খ is incorrect because a Variable Reluctance (VR) motor does not use permanent magnets in the rotor. The rotor consists of soft iron, which moves to minimize reluctance as the stator’s magnetic field changes.
      গ is correct because in a VR stepper motor, the rotor has no permanent magnet. Instead, it is made of soft iron and is driven by the changing magnetic field generated by the stator. The rotor aligns with the magnetic field in positions that minimize its reluctance, causing it to step forward.
      ঘ is incorrect because PM stepper motors use permanent magnets in the rotor, while VR stepper motors do not.

      ১১১.
      What is the typical material used for the core of a transformer?
      1. Copper
      2. Silicon Steel
      3. Aluminium
      4. Iron oxide
      ব্যাখ্যা

      Explanation:

      ক is incorrect because copper is used for the windings, not the core of the transformer.
      খ is correct because silicon steel is used for the transformer core due to its high magnetic permeability and low hysteresis loss, which reduces energy losses.
      গ is incorrect because aluminum is typically used for transformer windings but not for the core material.
      ঘ is incorrect because iron oxide is not used for transformer cores. Silicon steel is preferred for its better magnetic properties.

      ১১২.
      What is the EMF equation for a transformer?
        ব্যাখ্যা

        ১১৩.
        What does the equivalent circuit of a real transformer include?
        1. Ideal transformer with no losses or resistance
        2. Only the primary and secondary windings
        3. Core losses, winding resistance, and leakage reactance
        4. Only the winding resistance
        ব্যাখ্যা

        Explanation:
        The equivalent circuit of a real transformer is a model that includes all the losses and resistances that occur in an actual transformer. This typically includes the following components:

        Core Losses (Hysteresis and Eddy Current Losses):
        These are the losses in the core material due to the alternating magnetic flux. Core losses are represented by a resistive element in the equivalent circuit.
        Winding Resistance:
        Both the primary and secondary windings have inherent resistance, which causes I²R losses (copper losses). These resistances are represented by resistive elements in the equivalent circuit.
        Leakage Reactance:
        The magnetic flux that links only one winding and not both is known as leakage flux. The leakage reactance represents the opposition to the current flow due to this leakage flux. It is modeled as inductive reactance in the equivalent circuit.
        Why not the other options?
        ক) Ideal transformer with no losses or resistance:
        This describes an ideal transformer which assumes no losses, no resistance, and perfect efficiency. However, real transformers have losses and resistance, so this does not represent the actual equivalent circuit.
        খ) Only the primary and secondary windings:
        While the primary and secondary windings are part of the transformer, the equivalent circuit of a real transformer must also include the core losses, winding resistances, and leakage reactance. Just the windings alone do not fully represent the real transformer.
        ঘ) Only the winding resistance:
        This is an incomplete representation. The winding resistance is just one part of the equivalent circuit. The actual equivalent circuit also needs to include core losses and leakage reactance for a more accurate model.

        ১১৪.
        What is the purpose of an auto-transformer?
        1. To step up voltage with high efficiency
        2. To increase the current rating of a transformer
        3. To provide isolation between primary and secondary windings
        4. To provide voltage transformation with fewer turns in the winding
        ব্যাখ্যা

        Explanation:

        ক is incorrect because although auto-transformers can step up voltage, their primary advantage is that they achieve this with fewer turns in the winding compared to conventional transformers.
        খ is incorrect because an auto-transformer does not increase the current rating; it provides a voltage transformation with fewer turns.
        গ is incorrect because auto-transformers do not provide isolation between primary and secondary windings; the primary and secondary share part of the same winding.
        ঘ is correct because the main advantage of an auto-transformer is that it provides a voltage transformation with fewer turns in the winding, which results in a more compact design and higher efficiency.

        ১১৫.
        What is the main purpose of high-voltage transmission in a power system?
        1. To increase the speed of the generator
        2. To reduce the current and thereby minimize transmission losses
        3. To lower the cost of the transmission system
        4. To match the voltage levels of the generation station
        ব্যাখ্যা

        ১১৬.
        In a modern power system, what is the role of the distribution network?
        1. To step down the voltage from high to low for use by consumers
        2. To regulate the power generation output
        3. To minimize the transmission losses
        4. To synchronize the operation of power plants
        ব্যাখ্যা

        Explanation:

        ক is correct because the distribution system is responsible for stepping down the high voltage from the transmission network to a lower, usable voltage level suitable for consumer appliances and industries.
        খ is incorrect because regulating the power generation output is handled by the generation control system, not the distribution network.
        গ is incorrect because minimizing transmission losses is a function of the transmission system, not the distribution system.
        ঘ is incorrect because synchronizing the operation of power plants is part of the generation control system, not the distribution network.

        ১১৭.
        What does the term "load factor" refer to in a power system?
        1. The total amount of power generated in a system
        2. The ratio of maximum demand to the average demand over a period
        3. The total capacity of the power generation plant
        4. The ratio of actual power used to the available power
        ব্যাখ্যা

        Explanation:

        ক is incorrect because the total amount of power generated is not the same as the load factor. Load factor refers to how efficiently the generation capacity is utilized.
        খ is correct because the load factor is defined as the ratio of the average demand to the maximum demand over a certain period. It measures how efficiently the capacity is being used. A higher load factor means better efficiency in utilizing the installed capacity.
        গ is incorrect because the total capacity of a power generation plant refers to the maximum amount of power it can generate, which is not the same as the load factor.
        ঘ is incorrect because load factor is not directly related to the ratio of actual power used to the available power; it's about comparing the demand against the capacity over time.

        ১১৮.
        What does the term "Smart Grid" refer to in modern power systems?
        1. A grid that uses only renewable energy sources
        2. A grid that can automatically control energy distribution and reduce inefficiencies
        3. A grid that operates without human intervention
        4. A grid that only works with DC transmission
        ব্যাখ্যা

        Explanation:

        ক is incorrect because a smart grid does not necessarily rely exclusively on renewable energy; it can work with both conventional and renewable sources.
        খ is correct because a smart grid utilizes advanced sensors, communication networks, and automated systems to improve energy distribution, reduce inefficiencies, monitor performance in real-time, and integrate renewable energy sources seamlessly.
        গ is incorrect because a smart grid does not operate without human intervention. While it can automate certain processes, human oversight is still essential for control and decision-making.
        ঘ is incorrect because a smart grid can work with both AC and DC transmission systems. It is not limited to DC transmission.

        ১১৯.
        What is the role of substations in a modern power system?
        1. To convert mechanical energy into electrical energy
        2. To transform the voltage from high to low for distribution to consumers
        3. To store electricity for future use
        4. To monitor the power generation at the plant
        ব্যাখ্যা

        Explanation:

        ক is incorrect because substations do not convert mechanical energy to electrical energy; that is the role of power plants.
        খ is correct because substations are primarily responsible for stepping down the high voltage from the transmission system to a lower voltage suitable for distribution to consumers.
        গ is incorrect because substations do not store electricity; storage is handled by specialized equipment like batteries or pumped hydro storage.
        ঘ is incorrect because substations are not involved in monitoring power generation; that role belongs to the power generation plants and control centers.

        ১২০.
        Which of the following faults is considered a symmetrical fault?
        1. Line-to-ground fault
        2. Line-to-line fault
        3. Three-phase fault
        4. Single-phase fault
        ব্যাখ্যা

        Explanation:

        ক is incorrect because a line-to-ground fault is unsymmetrical.
        খ is incorrect because a line-to-line fault is unsymmetrical, although it involves two phases.
        গ is correct because a three-phase fault is a symmetrical fault, meaning all three phases experience the same type of fault and the system remains balanced.
        ঘ is incorrect because a single-phase fault is unsymmetrical.

        ১২১.
        In an RL series circuit, what is the primary reason for the occurrence of transients?
        1. The series connection of resistance and inductance causes an initial current surge.
        2. Inductance opposes changes in current, causing a voltage drop.
        3. The resistance introduces a phase shift between voltage and current.
        4. Inductance causes a sudden voltage rise during switching.
        ব্যাখ্যা

        Explanation:
        In an RL series circuit, transients occur primarily due to the inductance. Here's why:

        Inductance Opposes Changes in Current:
        Inductance, by its nature, opposes changes in current. When the circuit is switched on or off, the inductance generates a back EMF (electromotive force) to resist any sudden changes in current. This resistance to change causes a transient period as the current gradually increases or decreases, resulting in temporary voltage fluctuations or "spikes."
        Voltage Drop Due to Inductance:
        During the transient, inductance causes a voltage drop across the inductor as it resists the sudden change in current. This is a key characteristic of how inductive circuits behave during switching, leading to voltage variations.
        Why not the other options?
        ক) The series connection of resistance and inductance causes an initial current surge:
        This statement is not accurate for RL circuits. The inductance actually limits the current surge by opposing the rapid change in current. This means that, instead of a surge, there is a gradual buildup of current during transients.
        গ) The resistance introduces a phase shift between voltage and current:
        While the resistance and inductance together do cause a phase shift between voltage and current, this phase shift is not the primary reason for the occurrence of transients. The transient response is more significantly influenced by the inductor's behavior in opposing changes in current.
        ঘ) Inductance causes a sudden voltage rise during switching:
        Inductance can cause a voltage spike, but it does not cause a sudden rise in voltage. Instead, it causes a gradual change in voltage and opposes sudden changes. A sudden voltage rise, in fact, would typically result in a back EMF as the inductor resists the change.

        ১২২.
        Which fault type is most likely to cause the largest fault current in a power system?
        1. Single Line-to-Ground Fault (SLG)
        2. Line-to-Line Fault (LL)
        3. Double Line-to-Ground Fault (DLG)
        4. Three-Phase Fault
        ব্যাখ্যা

        Explanation:

        ক is incorrect because SLG faults typically have high fault currents, but not as high as a three-phase fault.
        খ is incorrect because line-to-line faults cause substantial fault currents but are not as severe as a three-phase fault.
        গ is incorrect because double line-to-ground faults result in significant fault currents, but three-phase faults can cause larger fault currents.
        ঘ is correct because a three-phase fault usually results in the largest fault current, as all three phases are involved in the fault and no impedance limits the fault current.

        ১২৩.
        What is the primary method used for fault calculations in power systems when using Z-bus?
        1. Voltage divider rule to determine fault currents.
        2. Superposition theorem to break down the fault conditions.
        3. Impedance matrix to calculate fault currents and voltages
        4. Use of symmetrical components to simplify the calculations.
        ব্যাখ্যা

        Explanation:
        In power system analysis, the Z-bus method refers to the use of the impedance matrix (also known as the bus impedance matrix) to analyze the system's behavior, including fault conditions. Here's how it works:

        Z-bus (Impedance Matrix):
        The Z-bus matrix is a mathematical representation of the network where the diagonal elements represent the self-impedance of each bus, and the off-diagonal elements represent the mutual impedance between buses. By using this matrix, the fault currents and voltages can be calculated directly for different fault types.
        Fault Calculations with Z-bus:

        When a fault occurs at a specific bus or between buses, the Z-bus method can be used to determine the fault currents by analyzing the impedance matrix and solving for the currents at the fault location.
        This method is efficient for large power systems, as it allows for fast computation of fault conditions without needing to solve the entire network equation for every possible fault.
        Why not the other options?
        ক) Voltage divider rule to determine fault currents:
        The voltage divider rule is typically used for simple circuits, but it is not the primary method for calculating fault currents in complex power systems like those using Z-bus. The voltage divider rule is less effective for multi-bus systems, which require a more systematic approach like the impedance matrix.
        খ) Superposition theorem to break down the fault conditions:
        The superposition theorem is a method used to simplify linear circuit analysis by considering the effects of each independent source separately. While this method can be used in fault analysis, the Z-bus method is more direct and efficient for fault calculations in power systems, especially for large, complex systems.
        ঘ) Use of symmetrical components to simplify the calculations:
        Symmetrical components are indeed used to analyze unbalanced faults in power systems (like line-to-ground or line-to-line faults). However, the Z-bus method directly calculates fault currents and voltages using the impedance matrix, whereas symmetrical components are more commonly used to simplify unbalanced fault analysis, not primarily for Z-bus-based calculations.

        ১২৪.
        Which FACTS device is used to regulate the voltage at the point of connection with the power system by generating or absorbing reactive power?
        1. SVC (Static Var Compensator)
        2. TCSC (Thyristor Controlled Series Capacitor)
        3. TCPST (Thyristor Controlled Phase Shifting Transformer)
        4. DVR (Dynamic Voltage Restorer)
        ব্যাখ্যা

        Explanation:

        ক is correct because SVC (Static Var Compensator) is specifically designed to regulate voltage by either generating or absorbing reactive power. It dynamically adjusts its reactive power output to maintain the system's voltage stability, particularly during disturbances or load variations. SVC is typically connected in parallel with the power system.
        খ is incorrect because TCSC (Thyristor Controlled Series Capacitor) is used to control series reactance, which helps in improving power flow and system stability, but it does not directly regulate voltage.
        গ is incorrect because TCPST (Thyristor Controlled Phase Shifting Transformer) primarily controls the active power flow by adjusting the phase shift between the transmission ends and is used to control power flow direction, not for regulating voltage.
        ঘ is incorrect because DVR (Dynamic Voltage Restorer) is used to restore voltage during short-duration voltage sags, typically caused by faults or switching events, rather than regulating voltage over long periods like SVC.

        ১২৫.
        Which device in the FACTS family is used to control the power flow in multiple transmission lines by exchanging reactive power between them?
        1. UPFC (Unified Power Flow Controller)
        2. IPFC (Interline Power Flow Controller)
        3. STATCOM (Static Synchronous Compensator)
        4. SVC (Static Var Compensator)
        ব্যাখ্যা

        Explanation:
        The IPFC (Interline Power Flow Controller) is a FACTS device designed to control the power flow in multiple transmission lines by exchanging reactive power between them. Here’s how it works:

        Power Flow Control Across Multiple Lines:
        The IPFC is specifically designed to handle multiple transmission lines, providing the ability to share reactive power between them. This helps in optimizing the overall system performance and stability by managing the power flow in each line and mitigating any overload conditions.
        Reactive Power Exchange:
        By controlling the flow of reactive power, the IPFC can improve the system's stability, increase the capacity of the transmission lines, and allow for more flexible and efficient operation of the network.
        Why not the other options?
        ক) UPFC (Unified Power Flow Controller):
        The UPFC is a versatile device that can control both active and reactive power flows on a transmission line, but it is not specifically focused on exchanging reactive power across multiple transmission lines. It typically operates on a single line.
        গ) STATCOM (Static Synchronous Compensator):
        A STATCOM is a device used to regulate reactive power at a single point in the system to improve voltage stability. While it is useful for reactive power compensation, it doesn't control power flow across multiple lines in the way an IPFC does.
        घ) SVC (Static Var Compensator):
        A SVC is used to regulate voltage and provide reactive power compensation at a specific location, but it doesn't have the capability to manage power flow across multiple lines by exchanging reactive power between them.

        ১২৬.
        What is the primary purpose of a Zener diode?
        1. To increase voltage
        2. To allow current to flow in reverse bias above a certain voltage
        3. To act as a regular diode
        4. To store electrical energy
        ব্যাখ্যা

        Explanation:
        A Zener diode is designed to operate in reverse bias and allows current to flow only when the reverse voltage exceeds a certain threshold, known as the Zener voltage. Here’s how it works:

        Zener Breakdown:
        In reverse bias, a regular diode would normally block current completely. However, a Zener diode is specifically designed to allow current to flow when the reverse voltage exceeds a certain value, known as the Zener voltage. This phenomenon is called Zener breakdown.
        Voltage Regulation:
        Zener diodes are commonly used in voltage regulation circuits, where they maintain a stable voltage by allowing current to flow only when the voltage exceeds the breakdown voltage. This makes them useful for providing stable reference voltages.
        Why not the other options?
        ক) To increase voltage:
        Zener diodes do not increase voltage. They are typically used for voltage regulation by limiting the voltage across them to a specific value when in reverse bias, but they do not step up voltage.
        গ) To act as a regular diode:
        While a Zener diode is a type of diode, its behavior is quite different from a regular diode. A regular diode only allows current to flow in one direction (forward bias), while a Zener diode is specifically designed for reverse bias operation at a certain voltage.
        ঘ) To store electrical energy:
        Zener diodes are not used to store energy. They are used for voltage regulation and controlling current in reverse bias, not for energy storage like capacitors or inductors.

        ১২৭.
        In which configuration does a BJT act as a current amplifier?
        1. Common Base
        2. Common Collector
        3. Common Emitter
        4. None of the above
        ব্যাখ্যা

        Explanation:
        In a BJT (Bipolar Junction Transistor), the common emitter configuration is the one in which the transistor acts as a current amplifier. Here's how it works:

        Current Amplification:
        In the common emitter configuration, the input current is applied to the base of the transistor, and the output current is taken from the collector. The output current (collector current) is much larger than the input current (base current), making it a current amplifier. The current gain in this configuration is typically high, meaning a small change in the base current results in a large change in the collector current.
        Voltage and Power Gain:
        In addition to current amplification, the common emitter configuration provides both voltage gain and power gain, which is why it's commonly used in amplifier circuits.
        Why not the other options?
        ক) Common Base:
        The common base configuration is known for voltage amplification rather than current amplification. It has a low input impedance and a high output impedance, which makes it suitable for high-frequency applications but not for current amplification. The current gain in this configuration is typically less than 1.
        খ) Common Collector:
        The common collector configuration, also known as the emitter follower, is used for voltage buffering and has unity gain for voltage. It provides high input impedance and low output impedance, but it does not amplify current in the traditional sense. Instead, it is used for impedance matching.
        ঘ) None of the above:
        This is incorrect because the common emitter configuration does act as a current amplifier.

        ১২৮.
        What happens to the current in a diode when it is forward-biased?
        1. The current increases as the voltage increases
        2. The current decreases as the voltage increases
        3. No current flows
        4. The current becomes constant
        ব্যাখ্যা

        Explanation:
        When a diode is forward-biased, the following happens:

        Forward Bias Condition:
        In a forward-biased diode, the positive terminal of the voltage source is connected to the anode and the negative terminal is connected to the cathode. This causes the depletion region to narrow, allowing current to flow through the diode once the threshold voltage (typically around 0.7V for silicon diodes) is reached.
        Current-Voltage Relationship:
        After the threshold voltage is surpassed, the current increases exponentially with an increase in voltage. This is due to the diode's non-linear characteristic. The diode essentially behaves like a short circuit once the forward voltage exceeds the threshold, and the current increases rapidly as the voltage increases.
        Why not the other options?
        খ) The current decreases as the voltage increases:
        This is incorrect because in a forward-biased diode, the current increases as the voltage increases, not decreases.
        গ) No current flows:
        This is true for a reverse-biased diode, not a forward-biased one. In forward bias, once the voltage surpasses the threshold, current does flow.
        ঘ) The current becomes constant:
        The current does not remain constant in a forward-biased diode. Instead, it increases exponentially as the forward voltage increases.

        ১২৯.
        What does a BJT's Q-point represent?
        1. The total current flowing through the transistor
        2. The voltage drop across the base-emitter junction
        3. The operating point of the transistor, defined by the DC voltages and currents
        4. The output voltage of the transistor
        ব্যাখ্যা

        Explanation:
        The Q-point (or Quiescent Point) of a BJT (Bipolar Junction Transistor) represents the transistor's operating point in a circuit when no input signal is applied (i.e., under quiescent or DC conditions). This point is defined by the DC voltages and currents at the transistor's terminals, including:

        Collector Current (I_C)
        Collector-Emitter Voltage (V_CE)
        The Q-point is important because it determines how the transistor will operate within its active region for amplification. If the Q-point is properly set, the transistor will amplify an AC signal without distortion. If it is poorly set (too high or too low), the transistor may enter saturation or cutoff, causing signal clipping or loss of amplification.

        Why not the other options?
        ক) The total current flowing through the transistor:
        While the current is a part of the Q-point, the Q-point specifically refers to the combination of voltages and currents that define the transistor's operating state. It's not just the total current flowing through the transistor.
        খ) The voltage drop across the base-emitter junction:
        The voltage drop across the base-emitter junction (usually around 0.7V for silicon BJTs) is part of the transistor's behavior, but it does not define the Q-point. The Q-point refers to the overall operating state (voltage and current) of the transistor.
        ঘ) The output voltage of the transistor:
        The output voltage is determined by the external circuit connected to the transistor, not just the Q-point. The Q-point defines the operating condition of the transistor but doesn't directly refer to the output voltage.

        ১৩০.
        What is the main purpose of a Schmitt Trigger in signal processing?
        1. To amplify low signals
        2. To provide a clean output by filtering noise
        3. To modulate the signal
        4. To convert a digital signal to analog
        ব্যাখ্যা

        Explanation:
        A Schmitt Trigger is a type of comparator that is used in signal processing to clean up noisy or analog signals and convert them into clean, digital signals. It is designed to provide a clean output by introducing hysteresis, meaning that the output state changes only when the input signal crosses certain threshold levels, preventing noise or small fluctuations from causing false triggering.

        Here’s how it works:

        Hysteresis: The Schmitt Trigger has two threshold voltages (upper and lower). The output state only changes when the input signal crosses one of these thresholds, which helps eliminate noise and small variations in the signal.
        Noise Immunity: It is especially useful for noisy signals that might otherwise cause erratic or unintended changes in the output. By using hysteresis, it ensures that only significant changes in the input signal cause a transition at the output, resulting in a clean, stable digital output.
        Why not the other options?
        ক) To amplify low signals:
        While a Schmitt Trigger can be used in circuits where amplification is needed, its main function is not amplification. Its primary role is to convert a noisy or analog signal to a clean digital signal, not to amplify low signals.
        গ) To modulate the signal:
        The Schmitt Trigger does not perform modulation. Modulation involves varying a carrier signal, typically for transmission purposes, while the Schmitt Trigger simply cleans up the input signal and converts it to a digital form.
        ঘ) To convert a digital signal to analog:
        A Schmitt Trigger does the opposite—it converts noisy analog signals into clean digital signals, not the other way around. A DAC (Digital-to-Analog Converter) would be used to convert digital signals to analog.

        ১৩১.
        What is the key difference between a BJT and a MOSFET?
        1. MOSFET requires a gate current, while BJT requires a base current
        2. MOSFET is a current-controlled device, while BJT is a voltage-controlled device
        3. MOSFET is a voltage-controlled device, while BJT is a current-controlled device
        4. Both are voltage-controlled devices
        ব্যাখ্যা

        গ) MOSFET is a voltage-controlled device, while BJT is a current-controlled device

        Explanation:
        MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor):

        Voltage-Controlled: A MOSFET is a voltage-controlled device. It operates by applying a voltage to the gate terminal, which controls the flow of current between the drain and source terminals. The key feature is that no current flows into the gate (except for a very small amount due to the gate capacitance), making it ideal for low-power control applications.
        BJT (Bipolar Junction Transistor):

        Current-Controlled: A BJT is a current-controlled device. The base current controls the collector current. The BJT requires a small current at the base to control a much larger current flowing from the collector to the emitter.
        Why not the other options?
        ক) MOSFET requires a gate current, while BJT requires a base current:
        This is incorrect. MOSFETs require virtually no current at the gate (except for a small capacitive charging current), whereas BJTs require a base current to operate.
        খ) MOSFET is a current-controlled device, while BJT is a voltage-controlled device:
        This is incorrect. The MOSFET is voltage-controlled (gate voltage), and the BJT is current-controlled (base current).
        ঘ) Both are voltage-controlled devices:
        This is incorrect. While the MOSFET is a voltage-controlled device, the BJT is current-controlled.

        ১৩২.
        What does the feedback resistor in a differential amplifier control?
        1. The input impedance
        2. The gain of the amplifier
        3. The output voltage
        4. The frequency response
        ব্যাখ্যা

        ১৩৩.
        What is the effect of increasing the temperature on a PN junction diode?
        1. It increases the forward voltage drop
        2. It increases the reverse leakage current
        3. It decreases the reverse leakage current
        4. It decreases the forward voltage drop
        ব্যাখ্যা

        Explanation:
        When the temperature of a PN junction diode increases, it has the following effects:

        Forward Voltage Drop:

        Decreases: As the temperature increases, the forward voltage drop across the diode decreases. This is because the thermal energy reduces the potential barrier of the junction, allowing charge carriers to cross more easily. Typically, the forward voltage drop decreases by about 2mV/°C.
        Reverse Leakage Current:

        Increases: The reverse leakage current (also known as reverse saturation current) increases with temperature. This is because the thermal excitation of charge carriers increases, allowing more carriers to flow even in the reverse direction. This leads to an increase in reverse leakage current as the temperature rises.
        Why not the other options?
        ক) It increases the forward voltage drop:
        This is incorrect. The forward voltage drop decreases as temperature increases, not increases.
        গ) It decreases the reverse leakage current:
        This is incorrect. The reverse leakage current actually increases with rising temperature, not decreases.
        ঘ) It decreases the forward voltage drop:
        This is correct, but it's not the most direct effect in this context. The primary effect in the options provided is the increase in the reverse leakage current.

        ১৩৪.
        What is the Barkhausen criterion used for?
        1. To analyze the frequency response of an oscillator
        2. To analyze the stability of a system
        3. To design oscillators
        4. To calculate gain in an amplifier
        ব্যাখ্যা

        Explanation:
        The Barkhausen criterion is a fundamental condition used in the design of oscillators. It defines the necessary conditions for sustained oscillations in a feedback circuit, such as an LC oscillator or RC oscillator. The criterion consists of two conditions:

        Loop Gain Condition: The loop gain (product of the amplifier gain and feedback network gain) must be equal to 1 for sustained oscillations.
        Phase Condition: The total phase shift around the feedback loop must be 0° (or an integer multiple of 360°), ensuring that the feedback is in phase with the input signal, thus reinforcing it.
        These two conditions ensure that the oscillator can generate a continuous waveform without attenuation.

        Why not the other options?
        ক) To analyze the frequency response of an oscillator:
        While the Barkhausen criterion is crucial for designing oscillators, it does not directly analyze the frequency response of the oscillator. The frequency response is typically analyzed through other methods such as transfer functions or Bode plots.
        খ) To analyze the stability of a system:
        The Barkhausen criterion is not used for system stability analysis, although it is related to the stability of oscillations. Stability analysis often involves tools like the Routh-Hurwitz criterion or Nyquist criterion.
        ঘ) To calculate gain in an amplifier:
        The Barkhausen criterion is not used to calculate the gain in an amplifier. It is specifically used for oscillator design, ensuring the conditions for sustained oscillations are met.

        ১৩৫.
        Which of the following is a feature of a Class D amplifier?
        1. High efficiency due to digital switching
        2. Low distortion but low efficiency
        3. High power consumption
        4. Analog signal modulation
        ব্যাখ্যা

        Explanation:
        A Class D amplifier is a type of switching amplifier that operates with high efficiency due to its use of digital switching. Here's how it works:

        Digital Switching:

        In a Class D amplifier, the output transistors (typically MOSFETs) are either fully on or fully off (digital switching), which minimizes the energy lost as heat. This results in high efficiency, typically 80-90% or even higher in some designs.
        High Efficiency:

        The digital switching allows the amplifier to operate with much lower power losses compared to analog amplifiers (Class A, B, or AB), where the transistors are always partially conducting, leading to higher heat dissipation and lower efficiency.
        Why not the other options?
        খ) Low distortion but low efficiency:
        Class D amplifiers actually offer high efficiency due to their switching nature, not low efficiency. They do, however, tend to have higher distortion compared to Class A or Class AB amplifiers because of the switching process, but this is typically managed with feedback and filtering.
        গ) High power consumption:
        Class D amplifiers are known for their low power consumption relative to their output power because of the high efficiency. They do not consume significant amounts of power compared to other amplifier classes like Class A, which have lower efficiency and higher power consumption.
        ঘ) Analog signal modulation:
        While Class D amplifiers modulate the input signal to generate the output (using techniques like Pulse Width Modulation or PWM), they are not specifically characterized by analog signal modulation. The key feature is their digital switching

        ১৩৬.
        What happens at the PN junction where the P-type and N-type materials meet?
        1. Electrons from the N-type region combine with holes from the P-type region, creating a depletion region.
        2. Electrons from the P-type region move into the N-type region, causing breakdown.
        3. Current flows continuously in both directions.
        4. No electric field is created between the P-type and N-type materials.
        ব্যাখ্যা

        Explanation: When the P-type and N-type materials are brought together, electrons from the N-type region combine with holes from the P-type region. This forms a depletion region where no free charge carriers exist, and it creates an electric field that opposes further carrier diffusion.

        Why Not Other Options:

        খ) Electrons from the N-type region do not move into the P-type region to cause breakdown unless reverse bias exceeds the breakdown voltage.
        গ) Current does not flow continuously in both directions in a PN junction; it only flows in one direction under forward bias.
        ঘ) An electric field is indeed created between the P-type and N-type regions, forming the depletion region.

        ১৩৭.
        What is the typical barrier voltage (or built-in potential) of a silicon diode?
        1. 0.3V
        2. 0.7V
        3. 1.2V
        4. 1.7V
        ব্যাখ্যা

        Explanation: The typical barrier voltage for a silicon diode is 0.7V. This is the voltage that must be applied in the forward direction for the diode to conduct. For germanium diodes, the barrier voltage is around 0.3V.

        Why Not Other Options:

        ক) A barrier voltage of 0.3V is characteristic of a germanium diode, not a silicon diode.
        গ) A barrier voltage of 1.0V is not typical for any common semiconductor diode.
        ঘ) A barrier voltage of 1.2V is too high for silicon diodes, which are generally around 0.7V.

        ১৩৮.
        Which circuit uses a single diode to convert AC to DC in a very basic form?
        1. Full-Wave Rectifier
        2. Half-Wave Rectifier
        3. Zener Regulator
        4. Voltage Multiplier
        ব্যাখ্যা

        Explanation: A half-wave rectifier uses a single diode to allow only the positive half of the AC signal to pass, resulting in a pulsating DC. This is a simple rectification process.

        Why Not Other Options:

        ক) A full-wave rectifier uses two or more diodes and rectifies both halves of the AC signal.
        গ) A Zener regulator is used for voltage regulation, not for rectifying AC to DC.
        ঘ) A voltage multiplier increases the voltage using capacitors and diodes, but does not directly convert AC to DC.

        ১৩৯.
        In a full-wave rectifier, what is the typical advantage compared to a half-wave rectifier?
        1. It uses a single diode to rectify the entire AC signal.
        2. It produces a smoother DC output.
        3. It has lower efficiency than a half-wave rectifier
        4. It can work with both positive and negative half-cycles.
        ব্যাখ্যা

        Explanation: A full-wave rectifier uses two or more diodes to rectify both the positive and negative halves of the AC input, leading to a smoother DC output with less ripple compared to a half-wave rectifier.

        Why Not Other Options:

        ক) A full-wave rectifier does not use a single diode; it uses at least two diodes.
        গ) A full-wave rectifier is more efficient than a half-wave rectifier because it uses both halves of the input AC signal.
        ঘ) While a full-wave rectifier works with both positive and negative halves of the AC signal, this option does not directly relate to the smoother output characteristic.

        ১৪০.
        What does the load line in a diode circuit represent?
        1. The relationship between voltage and current for the entire circuit.
        2. The output voltage of the diode.
        3. The external circuit's constraint on the current and voltage.
        4. The reverse breakdown voltage of the diode.
        ব্যাখ্যা

        Explanation: The load line represents the relationship between the voltage and current in the circuit and is determined by the external resistor or load. It shows how the operating point of the diode is affected by the external components.

        Why Not Other Options:

        ক) The load line shows the relationship specifically related to the diode's operating conditions, not the entire circuit.
        খ) The output voltage of the diode is not represented by the load line; it's the voltage-current relationship influenced by the circuit.
        ঘ) The reverse breakdown voltage is not shown by the load line, which mainly concerns the operating point of the diode in forward bias.

        ১৪১.
        Which of the following is not an application of a Zener diode?
        1. Voltage regulation
        2. Overvoltage protection
        3. Light emission
        4. Clipping circuits
        ব্যাখ্যা

        Explanation: Zener diodes are primarily used for voltage regulation and overvoltage protection because they are designed to operate in the reverse breakdown region. They are not used for emitting light.

        Why Not Other Options:

        ক) Zener diodes are widely used for voltage regulation due to their ability to maintain a stable voltage in reverse bias.
        খ) Zener diodes are also used for overvoltage protection, as they conduct in reverse breakdown to limit the voltage.
        ঘ) Zener diodes can be used in clipping circuits to limit the voltage to a specified level.

        ১৪২.
        What is the primary purpose of a voltage multiplier?
        1. To increase the frequency of the AC signal
        2. To convert AC voltage to DC voltage
        3. To increase the voltage to a higher level
        4. To decrease the voltage to a lower level
        ব্যাখ্যা

        Explanation: A voltage multiplier is a circuit designed to increase the voltage, typically using a combination of diodes and capacitors. It is often used to provide high-voltage DC from low-voltage AC.

        Why Not Other Options:

        ক) A voltage multiplier does not change the frequency of the signal; it only affects the voltage.
        খ) While voltage multipliers do convert AC to DC, their main function is to increase the voltage, not just to convert AC to DC.
        ঘ) Voltage multipliers are not used to decrease the voltage; that's the role of a voltage regulator or buck converter.

        ১৪৩.
        Which type of diode is designed to conduct in reverse breakdown region for voltage regulation?
        1. Zener diode
        2. LED
        3. Schottky diode
        4. Light-sensitive diode
        ব্যাখ্যা

        Explanation: Zener diodes are designed to operate in the reverse breakdown region, where they maintain a stable voltage, making them ideal for voltage regulation.

        Why Not Other Options:

        খ) LEDs (Light Emitting Diodes) emit light when forward biased but are not designed for voltage regulation.
        গ) Schottky diodes are used for their fast switching and low forward voltage, but not for voltage regulation in reverse breakdown.
        ঘ) Light-sensitive diodes (like photodiodes) are used to detect light, not for voltage regulation.

        ১৪৪.
        Which of the following diodes is best used for detecting light?
        1. Schottky diode
        2. Zener diode
        3. Photodiode
        4. Light-emitting diode (LED)
        ব্যাখ্যা

        Explanation: Photodiodes are specifically designed to detect light and convert it into an electrical signal, commonly used in optical applications.

        Why Not Other Options:

        ক) Schottky diodes are used for fast switching, not for detecting light.
        খ) Zener diodes are used for voltage regulation and operate in reverse breakdown, not for light detection.
        ঘ) LEDs emit light when forward biased; they are not designed to detect light.

        ১৪৫.
        Which of the following amplifier classes operates with the output transistor conducting for the entire input signal cycle?
        1. Class A
        2. Class B
        3. Class AB
        4. Class D
        ব্যাখ্যা

        Explanation: Class A amplifiers operate with the output transistor conducting for the full 360° of the input signal cycle. This results in high linearity but low efficiency due to continuous current flow.

        Why Not Other Options:

        খ) Class B amplifiers conduct only for half the input signal (180°), not the full cycle.
        গ) Class AB conducts for more than half but less than the entire cycle, providing a balance between Class A and Class B.
        ঘ) Class D amplifiers are switching amplifiers that work with transistors fully on or off and do not conduct for the entire signal cycle.

        ১৪৬.
        Which class of amplifier provides the highest efficiency?
        1. Class A
        2. Class B
        3. Class AB
        4. Class D
        ব্যাখ্যা

        Explanation: Class D amplifiers are the most efficient (up to 90% or more) because the transistors only operate in their on/off states, significantly reducing power loss as heat.

        Why Not Other Options:

        ক) Class A amplifiers have very low efficiency (~25-30%) due to continuous conduction.
        খ) Class B is more efficient than Class A (~78.5%), but it still has some losses due to crossover distortion.
        গ) Class AB amplifiers have moderate efficiency (~50-70%) because they conduct for more than half of the signal cycle.

        ১৪৭.
        In a Push-Pull amplifier, what is the main advantage over a single transistor amplifier?
        1. Higher distortion
        2. Higher power output
        3. Lower heat dissipation
        4. Higher efficiency
        ব্যাখ্যা

        Explanation:
        In a Push-Pull amplifier, the main advantage over a single transistor amplifier is higher efficiency. Here's why:

        Higher Efficiency:

        In a single transistor amplifier (such as a Class A amplifier), the transistor conducts for the entire input signal cycle, resulting in significant power loss as heat because the transistor is always on, leading to low efficiency (typically 25-30%).
        In a Push-Pull amplifier, two transistors are used: one for the positive half of the input signal and the other for the negative half. This means each transistor only conducts for half of the signal cycle, leading to much lower power dissipation and higher efficiency (typically 60-70% for Class AB).
        Heat Dissipation:

        Since the transistors are only conducting for half of the input signal cycle, there is less continuous power loss as heat, resulting in lower heat dissipation compared to single-transistor amplifiers.
        Why not the other options?
        ক) Higher distortion:
        A Push-Pull amplifier typically has lower distortion, especially even-order harmonics, compared to a single transistor amplifier. However, higher efficiency is the primary advantage, not higher distortion.
        খ) Higher power output:
        A Push-Pull amplifier does not necessarily provide higher power output compared to a single transistor amplifier. The efficiency is improved, but this does not directly result in higher output power.
        গ) Lower heat dissipation:
        Lower heat dissipation is a consequence of higher efficiency, but the main advantage of a Push-Pull amplifier is its improved efficiency, not just heat dissipation.

        ১৪৮.
        What is the purpose of using complementary symmetry in power amplifiers?
        1. To reduce distortion by using complementary transistors (NPN/PNP).
        2. To increase the output power of the amplifier.
        3. To decrease the gain of the amplifier
        4. To improve the linearity of the amplifier.
        ব্যাখ্যা

        Explanation: Complementary symmetry uses complementary NPN and PNP transistors in the output stage to reduce distortion and improve efficiency, especially in Class AB or Class B configurations.

        Why Not Other Options:

        খ) While complementary symmetry improves efficiency and reduces distortion, its main purpose is not directly increasing output power.
        গ) Complementary symmetry does not necessarily decrease gain.
        ঘ) Complementary symmetry improves linearity by reducing distortion.

        ১৪৯.
        Which type of shift register allows data to be shifted in serially and output in parallel?
        1. Serial-in, Serial-out (SISO)
        2. Serial-in, Parallel-out (SIPO)
        3. Parallel-in, Serial-out (PISO)
        4. Parallel-in, Parallel-out (PIPO)
        ব্যাখ্যা

        Explanation: In a SIPO (Serial-in, Parallel-out) shift register, data is entered serially, but the output is taken in parallel from each stage, making it suitable for converting serial data into parallel data.

        Why Not Other Options:

        ক) SISO (Serial-in, Serial-out) takes data in serial and also outputs it serially.
        গ) PISO (Parallel-in, Serial-out) takes data in parallel but outputs it serially.
        ঘ) PIPO (Parallel-in, Parallel-out) allows both input and output to be parallel.

        ১৫০.
        Which type of counter generates a sequence of states that moves forward and then reverses its sequence?
        1. Ring Counter
        2. Johnson Counter
        3. Binary Counter
        4. Up/Down Counter
        ব্যাখ্যা

        Explanation: A Johnson Counter produces a sequence of states that moves forward and then reverses its sequence due to the feedback mechanism involving inversion.

        Why Not Other Options:

        ক) A Ring Counter produces a cyclic sequence but does not reverse its sequence.
        গ) A Binary Counter counts in binary and does not reverse its sequence.
        ঘ) An Up/Down Counter counts up or down, but it does not involve reversing the sequence automatically.

        ১৫১.
        Which type of counter is affected by the ripple effect, where flip-flops trigger sequentially rather than simultaneously?
        1. Synchronous Counter
        2. Asynchronous Counter
        3. Up/Down Counter
        4. Pre-settable Counter
        ব্যাখ্যা

        Explanation: In an Asynchronous Counter, the flip-flops are triggered one after another, leading to the ripple effect. This can cause timing delays and slower operation.

        Why Not Other Options:

        ক) A Synchronous Counter triggers all flip-flops simultaneously, eliminating the ripple effect.
        গ) Up/Down Counters can be asynchronous or synchronous, but the ripple effect depends on whether the counter is asynchronous.
        ঘ) A Pre-settable Counter can be either synchronous or asynchronous, and it does not inherently cause a ripple effect.

        ১৫২.
        Which type of counter counts both upwards and downwards based on a control input?
        1. Synchronous Counter
        2. Asynchronous Counter
        3. Up/Down Counter
        4. Pre-settable Counter
        ব্যাখ্যা

        Explanation: Up/Down Counters are designed to count both upwards and downwards depending on the control input, providing flexible counting capabilities.

        Why Not Other Options:

        ক) A Synchronous Counter can be configured for either up or down counting but is not inherently flexible for both.
        খ) Asynchronous Counters are typically up-only counters without control for direction.
        ঘ) A Pre-settable Counter is more focused on presetting the initial value, not controlling counting direction.

        ১৫৩.
        What does the modulation index in frequency modulation represent?
        1. The ratio of message signal frequency to carrier frequency
        2. The ratio of frequency deviation to message signal frequency
        3. The ratio of carrier frequency to message signal frequency
        4. The bandwidth of the modulated signal
        ব্যাখ্যা

        ১৫৪.
        What type of noise is associated with thermal noise in communication systems?
        1. White noise
        2. Gaussian noise
        3. Impulse noise
        4. Shot noise
        ব্যাখ্যা

        Explanation:
        Thermal noise, also known as Johnson-Nyquist noise, is the noise generated by the random thermal motion of charge carriers (usually electrons) inside a conductor. This type of noise is present in all electronic devices and circuits due to temperature and is inherently white noise. Here’s why:

        White Noise:

        White noise has a constant power spectral density across all frequencies, meaning it contains equal power within any given bandwidth. Thermal noise is typically uniformly distributed across frequencies, making it white noise in nature.
        It is called "white" because it is analogous to white light, which contains all visible frequencies (colors) in equal amounts.
        Why not the other options?
        খ) Gaussian noise:

        Gaussian noise refers to a statistical distribution of noise amplitudes that follows a Gaussian or normal distribution. Thermal noise often follows a Gaussian distribution for its amplitude, but white noise is the broader concept in this case. While thermal noise is typically Gaussian, it is also classified as white noise due to its uniform spectral characteristics.
        ग) Impulse noise:

        Impulse noise consists of sudden, short bursts of energy, which are typically caused by external sources like electrical switching or lightning. Thermal noise is random and continuous, not impulsive.
        घ) Shot noise:

        Shot noise arises from discrete charge carriers (like electrons) crossing a junction, such as in diodes or transistors. It is not the same as thermal noise, which is due to the random motion of charge carriers within a conductor.

        ১৫৫.
        What is the primary purpose of using spread spectrum techniques in communication systems?
        1. To increase the transmission speed
        2. To reduce the bandwidth of the signal
        3. To make the signal more resistant to interference and jamming
        4. To modulate the signal at high frequencies
        ব্যাখ্যা

        Explanation:
        Spread spectrum techniques are used in communication systems primarily to increase resistance to interference and jamming by spreading the signal across a wide range of frequencies. Here's how it works:

        Resistance to Interference and Jamming:

        Spread spectrum techniques involve spreading the transmitted signal over a much wider frequency range than the minimum bandwidth required to transmit the information. This makes the signal more difficult to detect, interfere with, or jam because the energy is spread out over a broad spectrum.
        Even if part of the frequency band is affected by noise or jamming, the remaining frequencies can still carry the signal, making it more robust and reliable.
        Types of Spread Spectrum:

        Common spread spectrum techniques include Frequency Hopping Spread Spectrum (FHSS) and Direct Sequence Spread Spectrum (DSSS). These methods either rapidly change frequencies during transmission or use a wide band of frequencies in a continuous manner.
        Why not the other options?
        ক) To increase the transmission speed:
        Spread spectrum techniques are not primarily designed to increase the transmission speed. While some systems may increase the data rate with advanced techniques, the main goal of spread spectrum is resilience to interference, not speed.
        খ) To reduce the bandwidth of the signal:
        Spread spectrum increases the bandwidth of the signal, not reduces it. The technique spreads the signal over a larger frequency range, which is the opposite of reducing bandwidth.
        ঘ) To modulate the signal at high frequencies:
        While spread spectrum techniques do often involve modulating the signal over a wide range of frequencies, their primary purpose is not just to modulate at high frequencies but to enhance resistance to interference and improve security.

        ১৫৬.
        In pulse code modulation (PCM), what is the primary function of quantization?
        1. To filter the signal
        2. To convert the signal from analog to digital form
        3. To modulate the carrier signal
        4. To amplify the signal
        ব্যাখ্যা

        Explanation:
        In Pulse Code Modulation (PCM), quantization is the process that plays a key role in converting an analog signal into a digital form. Here's how it works:

        Analog to Digital Conversion:

        In PCM, an analog signal is first sampled at regular intervals (sampling). This gives discrete values at specific time points.
        After sampling, the quantization process assigns each sample a discrete value. This is done by mapping the continuous amplitude levels of the signal to a set of fixed, discrete levels. This step effectively turns the analog signal into a digital representation.
        Quantization:

        Quantization involves rounding the sampled signal values to the nearest value from a limited set of possible levels. The precision of this process depends on the bit depth or number of bits used in the digital representation. A higher bit depth results in more precise representation, while a lower bit depth leads to more quantization error.
        Why not the other options?
        ক) To filter the signal:
        Filtering is a process that removes unwanted frequencies, but it is not the primary function of quantization in PCM. Filtering may occur before sampling and quantization, but quantization itself is about converting the amplitude of the signal into a digital form.
        গ) To modulate the carrier signal:
        Modulation is the process of modifying a carrier signal to carry information (used in analog transmission methods), but quantization is not related to modulation. PCM focuses on digitalizing the signal, not modulating it.
        ঘ) To amplify the signal:
        Amplification is about increasing the strength of the signal, but quantization is about converting the signal into digital form, not amplifying it.

        ১৫৭.
        Which multiplexing technique uses the concept of time slots to transmit multiple signals over the same channel?
        1. Frequency Division Multiplexing
        2. Time Division Multiplexing
        3. Code Division Multiplexing
        4. Wavelength Division Multiplexing
        ব্যাখ্যা

        Explanation:
        Time Division Multiplexing (TDM) is a multiplexing technique that uses the concept of time slots to transmit multiple signals over the same communication channel. Here’s how it works:

        Time Slot Allocation:

        In TDM, each signal (or data stream) is assigned a specific time slot during which it can transmit its data. All signals share the same frequency channel, but they are transmitted in different time intervals.
        This allows multiple signals to be sent over the same channel, one at a time, in a sequential manner, and each signal gets a time slice to transmit its data.
        Applications:

        TDM is commonly used in digital communication systems, like telephone networks and data transmission systems, where multiple users share the same transmission medium (e.g., a fiber-optic cable or wireless link).
        Why not the other options?
        ক) Frequency Division Multiplexing (FDM):

        FDM works by allocating different frequency bands to each signal, allowing them to be transmitted simultaneously. It does not use time slots, so it’s not the correct answer.
        গ) Code Division Multiplexing (CDM):

        CDM uses unique codes to differentiate signals that are transmitted simultaneously over the same frequency band. It doesn’t rely on time slots like TDM.
        ঘ) Wavelength Division Multiplexing (WDM):

        WDM is similar to FDM but is used specifically for optical fibers. It allocates different wavelengths (or channels) to each signal, allowing multiple signals to be transmitted simultaneously over the same fiber. It does not use time slots.

        ১৫৮.
        Which modulation technique is best suited for transmitting data over a noisy channel?
        1. Amplitude Modulation
        2. Frequency Modulation
        3. Phase Modulation
        4. Frequency Shift Keying
        ব্যাখ্যা

        Explanation:
        Frequency Modulation (FM) is generally the most effective modulation technique for transmitting data over a noisy channel due to its resilience to noise. Here’s why:

        Noise Immunity:

        FM provides excellent resistance to amplitude noise. Since FM encodes information in the frequency of the carrier, changes in amplitude (which are often caused by noise) do not affect the signal as much as they would in Amplitude Modulation (AM).
        In FM, the frequency deviation (the amount the frequency shifts) is used to represent the data. This makes FM much more robust to noise because the noise primarily affects the amplitude, whereas FM focuses on frequency changes.
        Signal-to-Noise Ratio (SNR):

        FM systems tend to have a higher signal-to-noise ratio (SNR) compared to AM systems, making FM better suited for noisy environments, especially when bandwidth is available for the system to operate.
        Why not the other options?
        ক) Amplitude Modulation (AM):

        AM is highly sensitive to amplitude noise because the data is encoded in the amplitude of the signal. Any fluctuations in amplitude due to noise can directly affect the integrity of the signal, making AM less suitable for noisy channels.
        গ) Phase Modulation (PM):

        Phase Modulation shares some characteristics with FM and is relatively resilient to noise, but FM typically provides better overall performance in noisy environments due to its more widely adopted use in communications and better handling of frequency deviations.
        ঘ) Frequency Shift Keying (FSK):

        FSK is a digital modulation technique and can be resistant to noise, particularly in digital communication systems. However, in general, FM (an analog modulation) is better for continuous signal transmission over noisy channels, especially in terms of analog signal processing.

        ১৫৯.
        What is the main advantage of using Code Division Multiple Access (CDMA)?
        1. High data rates
        2. Low signal power requirement
        3. Reduced interference between users
        4. Simple receiver design
        ব্যাখ্যা

        Explanation:
        Code Division Multiple Access (CDMA) is a communication technique where multiple users share the same frequency spectrum by using unique codes to distinguish their signals. The main advantage of using CDMA is that it provides reduced interference between users. Here's how it works:

        Reduced Interference:

        In CDMA, each user's signal is spread across the frequency spectrum using a unique code (called a spread-spectrum code). This allows multiple users to transmit simultaneously on the same frequency channel without causing interference to each other.
        Since each signal is encoded with a unique code, the receiver can separate the signals even if they overlap in time and frequency, minimizing interference from other users.
        Other Benefits:

        High data rates and low signal power requirements can be advantages of CDMA in specific systems, but these are typically secondary benefits resulting from the ability to efficiently share resources. The primary advantage of CDMA is its ability to reduce interference.
        Why not the other options?
        ক) High data rates:
        While CDMA can support high data rates, the main advantage is its ability to reduce interference. High data rates are a secondary benefit that comes from the efficient use of the spectrum.
        খ) Low signal power requirement:
        CDMA can help reduce interference, but it does not necessarily reduce the power requirements compared to other techniques. Power control in CDMA networks is crucial but not the primary benefit.
        ঘ) Simple receiver design:
        CDMA receivers are typically more complex than those used in other multiple access techniques (like TDMA or FDMA) because they need to handle the process of code correlation to separate different users' signals. Thus, the design of CDMA receivers is not inherently simple.

        ১৬০.
        What is the main purpose of using frequency modulation (FM) in communication systems?
        1. To reduce the bandwidth requirement
        2. To provide resistance to noise
        3. To simplify the receiver design
        4. To increase the amplitude of the signal
        ব্যাখ্যা

        Explanation:
        Frequency Modulation (FM) is primarily used in communication systems to provide resistance to noise. Here’s how it works:

        Noise Immunity:

        In FM, information is encoded in the frequency of the carrier signal, rather than its amplitude. Since noise primarily affects the amplitude of signals, FM is much more resistant to noise, particularly amplitude noise.
        This makes FM ideal for applications where signal integrity is crucial, such as radio broadcasting and two-way radio communication.
        Why FM provides better noise resistance:

        In FM, changes in the amplitude due to noise don't affect the frequency of the signal. Even in the presence of noise, the receiver can accurately detect the frequency variations, making the communication more robust.
        Why not the other options?
        ক) To reduce the bandwidth requirement:

        FM actually requires larger bandwidth than Amplitude Modulation (AM). While the signal is more resistant to noise, it comes at the cost of requiring a wider frequency band to accommodate the frequency deviations.
        গ) To simplify the receiver design:

        FM receivers tend to be more complex than AM receivers due to the need for demodulation of frequency variations. They are not inherently simpler.
        ঘ) To increase the amplitude of the signal:

        FM does not affect the amplitude of the signal. Instead, it encodes information in the frequency of the carrier, so it does not increase the signal amplitude.

        ১৬১.
        Which of the following modulation techniques can carry more than one bit per symbol?
        1. Amplitude Modulation
        2. Frequency Modulation
        3. Quadrature Amplitude Modulation
        4. Phase Modulation
        ব্যাখ্যা

        Explanation:
        Quadrature Amplitude Modulation (QAM) is a modulation technique that allows more than one bit to be carried per symbol by combining both amplitude modulation (AM) and phase modulation (PM). Here's how it works:

        Multiple Bits per Symbol:

        In QAM, information is encoded in both the amplitude and phase of the carrier signal. Each combination of amplitude and phase represents a unique symbol. As a result, each symbol can represent multiple bits of information.
        For example, in 16-QAM, each symbol can represent 4 bits (since 2^4 = 16 possible symbol combinations).
        Higher Efficiency:

        Because each symbol carries multiple bits, QAM is more bandwidth-efficient than other modulation schemes like Amplitude Modulation (AM) or Frequency Modulation (FM).
        Why not the other options?
        ক) Amplitude Modulation (AM):

        AM typically carries only one bit per symbol (in binary systems) or modulates the signal amplitude without encoding multiple bits in a single symbol. It does not have the same capacity for carrying multiple bits as QAM.
        খ) Frequency Modulation (FM):

        FM also modulates the frequency of the carrier signal and typically carries one bit per symbol or uses continuous wave modulation, not multiple bits per symbol.
        ঘ) Phase Modulation (PM):

        While PM encodes information in the phase of the signal, it also typically carries one bit per symbol in basic configurations. Similar to FM, it can be adapted for higher efficiency, but not to the extent of QAM in terms of carrying multiple bits per symbol.

        ১৬২.
        What is the main disadvantage of using a superheterodyne receiver?
        1. It is too expensive to build
        2. It requires a complex local oscillator circuit
        3. It does not allow for frequency tuning
        4. It consumes a lot of power
        ব্যাখ্যা

        Explanation:
        The superheterodyne receiver is a widely used type of radio receiver that uses frequency mixing to convert the received signal to a fixed intermediate frequency (IF). While this design offers several advantages (such as better selectivity and sensitivity), the main disadvantage is:

        Complex Local Oscillator Circuit:

        The local oscillator in a superheterodyne receiver is used to generate a frequency that mixes with the incoming signal to produce the intermediate frequency (IF). This local oscillator circuit needs to be precise and stable to ensure proper tuning and frequency conversion.
        The complexity and stability requirements of the local oscillator can make the receiver more difficult and expensive to design, especially for high-frequency applications or where very high performance is required.
        Why not the other options?
        ক) It is too expensive to build:

        While a superheterodyne receiver does require more components than simpler designs, it is not inherently too expensive to build. In fact, the use of an intermediate frequency allows for better performance in many applications, making it quite cost-effective in many cases.
        গ) It does not allow for frequency tuning:

        Superheterodyne receivers do allow for frequency tuning. The receiver can tune into different frequencies by adjusting the local oscillator, which changes the intermediate frequency and effectively tunes the receiver to the desired signal.
        ঘ) It consumes a lot of power:

        While power consumption can be a factor depending on the design, it is not the primary disadvantage of a superheterodyne receiver. Many modern receivers, including superheterodyne types, are designed to be power-efficient.

        ১৬৩.
        What does the ALU (Arithmetic Logic Unit) of the 8086 perform?
        1. Arithmetic operations
        2. Logical operations
        3. Both A and B
        4. Memory operations
        ব্যাখ্যা

        Explanation:
        The ALU (Arithmetic Logic Unit) of the 8086 microprocessor performs both arithmetic operations and logical operations. Here’s how:

        Arithmetic Operations:

        The ALU performs basic arithmetic operations such as addition, subtraction, multiplication, and division. These operations are essential for handling numerical data in the processor.
        Logical Operations:

        The ALU also handles logical operations such as AND, OR, NOT, and XOR. These operations are crucial for decision-making and data manipulation in the processor, especially when dealing with binary data.
        Why not the other options?
        ক) Arithmetic operations:

        While the ALU performs arithmetic operations, it also performs logical operations. Therefore, it is more accurate to say that it does both arithmetic and logical operations, not just arithmetic.
        খ) Logical operations:

        Similarly, the ALU performs logical operations, but it also performs arithmetic operations. So, it's not limited to just logical operations.
        ঘ) Memory operations:

        The ALU does not directly handle memory operations. Memory operations (such as reading from or writing to memory) are managed by the memory management unit (MMU) or other parts of the processor.

        ১৬৪.
        Which of the following microprocessor architectures is most commonly used in modern PCs?
        1. 8086
        2. RISC
        3. CISC
        4. ARM
        ব্যাখ্যা

        Explanation:
        The CISC (Complex Instruction Set Computing) architecture is the most commonly used in modern PCs, especially in the form of the x86 architecture, which is employed by Intel and AMD processors. Here's why:

        x86 Architecture:

        The x86 architecture, which is a type of CISC, has been the dominant architecture in personal computers for decades. It allows complex instructions to be executed in a single cycle, which simplifies software development for general-purpose computing.
        Compatibility:

        CISC-based processors like Intel's Core series and AMD's Ryzen processors are backward compatible with a vast range of software that has been developed over the years. This compatibility is crucial in the desktop and laptop market.
        Wide Adoption:

        Intel and AMD, two major chip manufacturers, continue to dominate the PC market with their CISC-based processors. Most modern PCs, laptops, and servers use x86 architecture, making CISC the most common architecture.
        Why not the other options?
        ক) 8086:

        The 8086 microprocessor was an early example of a CISC processor. However, it is obsolete in modern systems, and x86 (an evolution of 8086) is the dominant architecture used today in modern PCs.
        খ) RISC:

        RISC (Reduced Instruction Set Computing) is popular in mobile devices (e.g., ARM processors) and some specialized computing systems. While RISC is increasingly used in modern laptops (such as Apple's M1 chip), x86-based CISC processors still dominate the PC market.
        ঘ) ARM:

        ARM processors, based on RISC, are increasingly used in mobile devices, tablets, and newer laptops, especially with Apple's transition to ARM-based processors. However, CISC-based processors (x86) are still the most common architecture in the PC market.

        ১৬৫.
        What is the maximum number of segments in the 8086 memory segmentation scheme?
        1. 64KB
        2. 256KB
        3. 1MB
        4. 64 segments
        ব্যাখ্যা

        ১৬৬.
        Which register in 8086 points to the top of the stack?
        1. SP
        2. IP
        3. BP
        4. DI
        ব্যাখ্যা

        Explanation:
        In the 8086 microprocessor, the Stack Pointer (SP) register points to the top of the stack. Here's how it works:

        Stack Pointer (SP):

        The SP register is used to keep track of the top of the stack. The stack is a region of memory used for storing temporary data, such as return addresses, local variables, and function parameters.
        The SP register always points to the current position at the top of the stack. When data is pushed onto the stack, the SP is decremented (since the stack grows downwards in memory), and when data is popped from the stack, the SP is incremented.
        Why not the other options?
        IP (Instruction Pointer):

        The IP register holds the address of the next instruction to be executed. It does not deal with the stack.
        BP (Base Pointer):

        The BP register is typically used to reference data on the stack, particularly in the context of stack frames in procedure calls, but it does not directly point to the top of the stack like SP.
        DI (Destination Index):

        The DI register is used in string operations to hold the destination address for string operations (such as MOVS, LODS, etc.) but is not involved with the stack operations.

        ১৬৭.
        Which type of memory is typically used for storing the program code in an embedded system?
        1. ROM
        2. RAM
        3. Catche
        4. EPROM
        ব্যাখ্যা

        Explanation:
        In an embedded system, the program code (or firmware) is typically stored in ROM (Read-Only Memory). Here's why:

        ROM (Read-Only Memory):

        ROM is a type of non-volatile memory, meaning it retains its contents even when the power is turned off.
        Program code is often stored in ROM because it needs to remain intact across power cycles, and the program code generally does not change during operation. This makes ROM ideal for storing firmware or the initial program code in embedded systems.
        Why ROM for Program Code:

        ROM ensures that the code is permanent, and its contents cannot be easily modified, making it suitable for system firmware or applications that do not require frequent updates.
        Why not the other options?
        RAM (Random Access Memory):

        RAM is used for temporary data storage and is volatile, meaning it loses its contents when the power is turned off. It is used during program execution for runtime data, not for storing the permanent program code.
        Cache:

        Cache memory is a small, high-speed memory used to store frequently accessed data to improve performance. It is not used for storing program code but instead speeds up the execution of programs by providing faster access to commonly used data.
        EPROM (Erasable Programmable Read-Only Memory):

        EPROM is a type of ROM that can be erased and reprogrammed. While it can be used to store program code, it is not as common in modern embedded systems for permanent program storage, as ROM and other types of non-volatile memory (like Flash Memory) are often preferred.

        ১৬৮.
        In 8086, which register stores the address of the next instruction to be fetched?
        1. IP
        2. SP
        3. BP
        4. AH
        ব্যাখ্যা

        Explanation:
        In the 8086 microprocessor, the IP (Instruction Pointer) register holds the address of the next instruction to be fetched for execution. Here's how it works:

        Instruction Pointer (IP):

        The IP register keeps track of the memory address of the next instruction that the 8086 will fetch and execute.
        After each instruction is fetched, the IP is automatically updated to point to the next instruction in memory. It increments as the program executes, unless there is a jump or a branch instruction that changes its value.
        Why not the other options?
        SP (Stack Pointer):

        The SP (Stack Pointer) points to the top of the stack and is used for managing function calls and local variables, not for pointing to the next instruction.
        BP (Base Pointer):

        The BP (Base Pointer) is used to reference data on the stack, particularly in the context of stack frames during procedure calls, but it does not point to the next instruction.
        AH (Accumulator High):

        The AH register is the high byte of the AX register, which is used for arithmetic operations and general-purpose tasks. It does not hold the address of the next instruction to be executed.

        ১৬৯.
        Which of the following is a characteristic of the 8255A Programmable Peripheral Interface?
        1. Serial communication
        2. Parallel data transfer
        3. Interrupt generation
        4. DMA control
        ব্যাখ্যা

        Explanation:
        The 8255A Programmable Peripheral Interface (PPI) is a widely used peripheral interface chip for parallel data transfer between the microprocessor and peripheral devices. Here’s how it works:

        Parallel Data Transfer:

        The 8255A is designed for parallel data communication, where multiple bits of data are transferred simultaneously. It has 3 ports (Port A, Port B, and Port C), which can be configured for input or output, allowing the transfer of parallel data between the microprocessor and peripheral devices such as keyboards, displays, or other parallel peripherals.
        Modes of Operation:

        It supports multiple modes, such as mode 0 (basic input/output), mode 1 (strobed input/output), and mode 2 (bi-directional bus), all designed to handle parallel communication efficiently.
        Why not the other options?
        ক) Serial communication:

        The 8255A is not used for serial communication; it is specifically designed for parallel data transfer. Serial communication is typically handled by other interfaces, such as USART (Universal Synchronous Asynchronous Receiver Transmitter) or SPI (Serial Peripheral Interface).
        গ) Interrupt generation:

        While the 8255A can be used in systems that require interrupt handling, the chip itself does not directly generate interrupts. Interrupts are typically managed by the microprocessor or other dedicated interrupt controllers.
        ঘ) DMA control:

        The 8255A does not support Direct Memory Access (DMA). DMA control is usually handled by other components, such as the 8257 DMA controller, not the 8255A PPI.

        ১৭০.
        Which of the following is used for controlling interrupts in a microprocessor system?
        1. 8255A
        2. 8259A
        3. 8284A
        4. 8251A
        ব্যাখ্যা

        Explanation:
        The 8259A is an Interrupt Controller used in microprocessor systems to manage and prioritize interrupts. It allows the microprocessor to handle multiple interrupt requests by prioritizing and managing the interrupts efficiently. Here's how it works:

        8259A Interrupt Controller:

        The 8259A is designed to handle interrupt requests (IRQ) from various peripherals and devices.
        It can prioritize interrupts and send them to the microprocessor in an orderly manner. The 8259A can also support nested interrupts, where high-priority interrupts can interrupt lower-priority ones.
        It typically supports up to 8 interrupt lines (though multiple 8259A controllers can be cascaded to handle more).
        Why not the other options?
        ক) 8255A:

        The 8255A is a Programmable Peripheral Interface (PPI) used for parallel data transfer between the microprocessor and peripheral devices. It is not used for interrupt control.
        গ) 8284A:

        The 8284A is a Clock Generator and Driver used in conjunction with the 8086 microprocessor. It generates clock signals but does not manage interrupts.
        ঘ) 8251A:

        The 8251A is a Universal Synchronous Asynchronous Receiver Transmitter (USART) used for serial data communication, not for interrupt control.

        ১৭১.
        In which mode does the 8086 microprocessor operate by default?
        1. Protected mode
        2. Real mode
        3. Virtual mode
        4. Hybrid mode
        ব্যাখ্যা

        Explanation:
        By default, the 8086 microprocessor operates in Real mode. Here’s why:

        Real Mode:

        In Real mode, the 8086 operates in a 16-bit environment, addressing memory directly in a linear manner up to 1 MB (address space from 0x00000 to 0xFFFFF).
        The 8086 microprocessor does not use any memory protection or virtual memory in real mode. It is a simple mode where the CPU can directly access memory and execute instructions without any advanced features like segmentation or multitasking.
        Why not the other options?
        ক) Protected mode:

        Protected mode is used in later processors like the 80286 and later, where advanced features like memory protection, virtual memory, and multitasking are introduced. The 8086 does not support protected mode by default.
        গ) Virtual mode:

        Virtual mode is used in some later processors, such as the 80286 and beyond, where the processor can emulate a 16-bit environment even in protected mode. The 8086 does not support virtual mode by default.
        ঘ) Hybrid mode:

        Hybrid mode is not a term typically used for the 8086's default mode. It refers to a combination of different modes in modern processors (like the 386 and later), but it does not apply to the 8086 microprocessor.

        ১৭২.
        What does the 8086 microprocessor use to store the address of the next instruction to execute?
        1. Stack Pointer
        2. Program Counter
        3. Instruction Pointer
        4. Base Pointer
        ব্যাখ্যা

        Explanation:
        The 8086 microprocessor uses the Program Counter (PC) to store the address of the next instruction to be executed. Here's how it works:

        Program Counter (PC):

        The Program Counter (PC), also known as Instruction Pointer (IP) in some contexts, holds the memory address of the next instruction to be fetched and executed by the microprocessor.
        After each instruction is fetched, the PC is automatically updated to point to the next instruction in the sequence.
        Why not the other options?
        ক) Stack Pointer (SP):

        The Stack Pointer (SP) is used to keep track of the top of the stack and is involved in function calls, returns, and local variable storage, not in storing the address of the next instruction to be executed.
        গ) Instruction Pointer (IP):

        While the Instruction Pointer (IP) is responsible for storing the address of the next instruction in the 8086 microprocessor, it is often referred to interchangeably with the Program Counter (PC). In the 8086, the Program Counter and Instruction Pointer serve the same function.
        ঘ) Base Pointer (BP):

        The Base Pointer (BP) is used for referencing variables and data in the stack frame, particularly in function calls. It does not store the address of the next instruction to be executed.

        ১৭৩.
        What is the function of the 8284A lock generator IC?
        1. Control memory operations
        2. Generate clock signals for the processor
        3. Control interrupt generation
        4. Generate random numbers
        ব্যাখ্যা

        Explanation:
        The 8284A is a Clock Generator and Driver IC that is specifically designed to provide the necessary clock signals for the 8086 microprocessor and other related components. Here’s what it does:

        Generate Clock Signals:

        The primary function of the 8284A is to generate clock signals for the processor. It generates both the system clock (for the CPU) and the required timing signals for other components like memory, buses, and peripheral devices.
        Synchronization:

        The 8284A ensures that the microprocessor and other parts of the system are properly synchronized in terms of timing and data transfer. It takes the external clock input (from a crystal or oscillator) and generates multiple timing signals required by the 8086 system.
        Why not the other options?
        ক) Control memory operations:

        While the 8284A helps provide timing signals for memory operations, its primary function is to generate clock signals, not directly control memory operations.
        গ) Control interrupt generation:

        The 8284A does not control interrupt generation. Interrupts are handled by other components, such as the 8259A Interrupt Controller.
        ঘ) Generate random numbers:

        The 8284A is not used for generating random numbers. Its role is specifically related to clock generation and synchronization, not randomness.

        ১৭৪.
        What does the 8086 use to divide the memory into different segments?
        1. Registers
        2. Segment registers
        3. Instruction pointer
        4. Flags register
        ব্যাখ্যা

        Explanation:
        The 8086 microprocessor divides its 1MB memory space into different segments using segment registers. Here's how it works:

        Segment Registers:

        The 8086 has 4 segment registers:

        CS (Code Segment): Used to store the address of the current instruction being executed.
        DS (Data Segment): Points to the data segment, where variables are stored.
        SS (Stack Segment): Points to the stack, which is used for storing function calls, local variables, and return addresses.
        ES (Extra Segment): Used for additional data storage, often in string operations or as an additional data segment.
        These segment registers allow the 8086 to divide its memory into segments, enabling it to access different areas of memory efficiently.
        How Segmentation Works:

        Each segment register holds the base address of a segment, and the offset is combined with this base to generate a 20-bit address. This gives the 8086 a 1MB memory space, divided into segments of up to 64KB each.
        Why not the other options?
        ক) Registers:

        Registers are used for general-purpose operations, such as holding temporary data, addresses, or intermediate results. However, segment registers specifically handle memory segmentation in the 8086.
        গ) Instruction pointer:

        The Instruction Pointer (IP) holds the address of the next instruction to be fetched and is not used for memory segmentation.
        ঘ) Flags register:

        The Flags register is used to store the status of various flags (such as zero, carry, overflow, etc.) and does not participate in memory segmentation.

        ১৭৫.
        What is the characteristic equation of a system?
        1. The equation that determines system stability
        2. The equation for the system's output
        3. The equation that defines the transfer function
        4. The equation derived from the system's poles and zeros
        ব্যাখ্যা

        Explanation:
        The characteristic equation of a system is an equation that determines the stability of the system. It is derived from the denominator of the system's transfer function (in the Laplace domain) and is used to analyze the system’s behavior, particularly its stability.

        System Stability:

        The characteristic equation is typically used to find the poles of the system, which are the values of the complex frequency variable (usually s in Laplace transform) that make the denominator of the transfer function equal to zero.
        The roots of the characteristic equation are the system's poles, and the location of these poles in the complex plane (specifically, whether they lie in the left half or right half of the complex plane) determines whether the system is stable or unstable.
        If all poles have negative real parts (left half of the complex plane), the system is stable. If any pole has a positive real part (right half), the system is unstable.
        Why not the other options?
        খ) The equation for the system's output:

        The output equation of the system relates the input to the output but is not the characteristic equation. The output of the system can be found by using the system's transfer function and input, but this is not the characteristic equation.
        গ) The equation that defines the transfer function:

        The transfer function is the ratio of the Laplace transform of the output to the Laplace transform of the input. While the characteristic equation is related to the transfer function (it comes from the denominator), the transfer function itself is not the same as the characteristic equation.
        ঘ) The equation derived from the system's poles and zeros:

        The characteristic equation is derived from the denominator of the transfer function, which corresponds to the system's poles. However, the zeros are related to the numerator and do not directly affect the characteristic equation.

        ১৭৬.
        What happens when the gain of a control system is increased?
        1. The system becomes more stable
        2. The poles of the system move closer to the right half of the s-plane
        3. The system's response becomes slower
        4. The bandwidth of the system increases
        ব্যাখ্যা

        Explanation:
        When the gain of a control system is increased, the system typically becomes less stable (in the context of open-loop gain), and the poles of the system tend to move closer to the right half of the s-plane, leading to a potentially unstable system. Here's a breakdown of how this happens:

        Effect of Increasing Gain:

        In a feedback control system, increasing the gain can shift the location of the system's poles (which are the roots of the characteristic equation) on the s-plane.
        If the gain increases beyond a certain point, the poles can move to the right half of the s-plane, making the system unstable.
        Stability is determined by the real part of the poles: if any pole has a positive real part (i.e., lies in the right half of the s-plane), the system becomes unstable.
        Why not the other options?
        ক) The system becomes more stable:

        Increasing the gain of the system generally does not improve stability. In fact, higher gain often leads to instability, as it moves the poles toward the right half of the s-plane.
        গ) The system's response becomes slower:

        Increasing the gain generally does not make the system slower; instead, it can make the system more responsive. However, if the gain becomes too high, it could lead to oscillations or instability, which can affect the perceived response time.
        ঘ) The bandwidth of the system increases:

        Increasing gain does not directly increase the bandwidth of the system. In fact, in some cases, higher gain can cause saturation or clipping, which could reduce the effective bandwidth.

        ১৭৭.
        What is the main purpose of a Bode plot?
        1. To measure the system's gain at various frequencies
        2. To determine the system's transfer function
        3. To plot the system's poles and zeros
        4. To observe the phase margin and gain margin
        ব্যাখ্যা

        Explanation:
        A Bode plot is a graphical representation used to analyze the frequency response of a control system. It consists of two plots: one for the magnitude (gain) and one for the phase of the system's transfer function as a function of frequency. The primary purpose of a Bode plot is to:

        Observe the Phase Margin and Gain Margin:

        The phase margin is the amount of phase shift at the frequency where the open-loop gain is 1 (0 dB), and it indicates the stability of the system.
        The gain margin is the amount of gain that can be increased before the system becomes unstable, and it provides insight into the system's stability.
        The Bode plot is widely used for assessing these margins, which are key indicators of the system's stability and robustness.
        Why not the other options?
        ক) To measure the system's gain at various frequencies:

        While a Bode plot shows the gain at various frequencies (in the magnitude plot), its primary purpose is to analyze the stability margins (phase and gain margin), not just to measure gain.
        খ) To determine the system's transfer function:

        A Bode plot is generated from the transfer function, but it does not directly determine the transfer function itself. It provides a visual representation of the system's behavior in the frequency domain based on the transfer function.
        গ) To plot the system's poles and zeros:

        Poles and zeros can be represented in a pole-zero plot, but the Bode plot does not directly plot the poles and zeros. Instead, it shows how the system's transfer function behaves in terms of magnitude and phase across frequencies.

        ১৭৮.
        In a feedback control system, what is the effect of negative feedback?
        1. It increases the system's sensitivity to noise
        2. It increases the system's gain
        3. It decreases the system's bandwidth
        4. It improves system stability and reduces error
        ব্যাখ্যা

        Explanation:
        Negative feedback in a feedback control system has several important effects on the system's performance:

        Improves System Stability:

        Negative feedback helps to stabilize the system by reducing the likelihood of oscillations or instability. It works by reducing the gain at high frequencies and helping to keep the system’s response under control.
        Reduces Error:

        Negative feedback can significantly reduce the steady-state error in the system. By feeding a portion of the output back into the input with an inverted phase, the system can correct discrepancies between the desired output and the actual output, thus minimizing error.
        Why not the other options?
        ক) It increases the system's sensitivity to noise:

        Negative feedback reduces the system's sensitivity to noise rather than increasing it. By adjusting the output based on the error signal, negative feedback minimizes the effect of external disturbances and noise.
        খ) It increases the system's gain:

        Negative feedback does not increase the system's gain; in fact, it tends to decrease the gain of the open-loop system to improve stability and reduce distortion. While it helps to regulate the system, it generally reduces the effective gain.
        গ) It decreases the system's bandwidth:

        Negative feedback can increase the bandwidth of the system in some cases. It does so by making the system more linear and less prone to distortion, which can help it handle a broader range of frequencies.

        ১৭৯.
        What does a root locus plot show in control systems?
        1. The system's phase response
        2. The system's gain at different frequencies
        3. The trajectory of poles as the system gain changes
        4. The system's time-domain response
        ব্যাখ্যা

        Explanation:
        A root locus plot is a graphical representation used in control systems to show how the poles of the closed-loop transfer function change as the system gain varies. It provides valuable insight into how the system's stability and performance will change when the system gain is adjusted.

        Root Locus Plot:

        The root locus shows the movement of the poles of the transfer function in the s-plane (complex plane) as the gain of the system changes.
        By analyzing the root locus, engineers can determine how changes in gain affect the system's stability and response. If the poles move into the right half of the s-plane, the system becomes unstable.
        Why not the other options?
        ক) The system's phase response:

        The phase response of the system is typically shown in a Bode plot, not a root locus plot. The root locus plot focuses on the movement of poles, not phase response.
        খ) The system's gain at different frequencies:

        The system's gain at different frequencies is typically shown in a Bode plot or Nyquist plot, not a root locus plot. The root locus focuses on the behavior of the system as the gain changes, but not in terms of frequency.
        ঘ) The system's time-domain response:

        The time-domain response of a system can be analyzed using step response or impulse response plots. The root locus plot focuses on the location of poles and how they affect the system's stability, not the time-domain response directly.

        ১৮০.
        Which of the following control systems is commonly used to minimize steady-state error?
        1. Proportional controller
        2. Integral controller
        3. Derivative controller
        4. PID controller
        ব্যাখ্যা

        Explanation:
        In control systems, the steady-state error is the difference between the desired output (setpoint) and the actual output of the system once it has settled and is no longer changing. The primary goal in many control applications is to minimize or eliminate this steady-state error.

        Integral Controller:
        Function: The integral controller continuously sums the error over time. If there is any persistent error, the integral action will accumulate this error and adjust the system output accordingly.
        Effect on Steady-State Error: By accumulating the error, the integral controller ensures that the system drives the error to zero over time, effectively eliminating steady-state error in systems with constant disturbances or setpoint changes.
        Why It Works: The integral action compensates for any constant errors by increasing the control effort until the error is corrected. This makes it particularly effective for eliminating steady-state errors caused by constant disturbances or biases.
        Why Not the Other Options?
        ক) Proportional Controller:

        Function: The proportional controller adjusts the output in proportion to the current error. While it can reduce the error, it doesn't eliminate steady-state error entirely, especially in systems with constant disturbances or setpoint changes. It typically leaves a small, non-zero error at steady state.
        গ) Derivative Controller:

        Function: The derivative controller responds to the rate of change of the error, helping to predict and counteract future errors. However, it does not directly address steady-state error and is more effective for improving system stability and transient response.
        ঘ) PID Controller:

        Function: The PID controller combines proportional, integral, and derivative actions. While it can help reduce steady-state error by using the integral term, the integral controller by itself is the key term that specifically minimizes steady-state error. The PID controller improves overall system performance by addressing transient and steady-state errors simultaneously.

        ১৮১.
        In a control system, what does the term 'settling time' refer to?
        1. The time taken to reach 95% of the final value
        2. The time taken to reach the final steady-state
        3. The time taken to reach the peak overshoot
        4. The time taken for the system to stabilize
        ব্যাখ্যা

        Explanation
        Settling time is the time required for a control system's output to reach and remain within a specific tolerance band (typically 2% or 5%) of its final, steady-state value.
        This tolerance band signifies that the system has effectively stabilized after a change or disturbance.



        Why other options are incorrect
        ক) The time taken to reach 95% of the final value: This is related to the definition of rise time, not settling time.
        খ) The time taken to reach the final steady-state: The system's output may oscillate around the final value, so it doesn't necessarily "reach" the steady-state at a single point in time, but rather settles within a small range of it.
        গ) The time taken to reach the peak overshoot: This describes the peak time, which is the time to reach the maximum value of the response curve.

        ১৮২.
        Which type of system response is characterized by a smooth curve with no oscillations?
        1. Underdamped response
        2. Critically damped response
        3. Overdamped response
        4. Oscillatory response
        ব্যাখ্যা

        Explanation:
        Critically damped response: This type of response is characterized by the system returning to its steady-state position as quickly as possible without oscillating. The curve is smooth and doesn't exhibit any oscillations. It is the ideal case for many control systems because it avoids both overshoot and oscillation, settling quickly without any lingering effects.
        Underdamped response: This response shows oscillations as the system settles. The curve exhibits overshoot and oscillates before eventually settling to the steady-state value.
        Overdamped response: In this case, the system takes a longer time to settle compared to the critically damped system, and the response is smooth, but slower. There are no oscillations, but it is slower in reaching the steady-state.
        Oscillatory response: This term refers to systems that show sustained oscillations (such as sinusoidal behavior), often in underdamped systems.

        ১৮৩.
        In control systems, what does the term 'steady-state error' refer to?
        1. The difference between the output and the desired value after transient effects have died down
        2. The maximum deviation from the desired output
        3. The time required to reach the final value
        4. The phase shift between input and output
        ব্যাখ্যা

        Explanation:
        Steady-state error refers to the difference between the actual output of a control system and the desired output once the system has settled and all transient behaviors (such as overshoot, oscillations, and initial deviations) have died down. It reflects how well the system tracks the reference input over time after it has stabilized.

        Why the Other Options Are Incorrect:
        খ) The maximum deviation from the desired output: This describes the peak error or maximum overshoot, which occurs during the transient phase, not after the system has settled.
        গ) The time required to reach the final value: This refers to settling time, not steady-state error. Steady-state error focuses on how close the output is to the desired value after the transient effects have disappeared, not the time to reach it.
        ঘ) The phase shift between input and output: This refers to the phase margin or phase shift in frequency response analysis, not to steady-state error.

        ১৮৪.
        What happens when the derivative term is added to a PID controller?
        1. The system response becomes slower
        2. The system can anticipate future error
        3. The steady-state error increases
        4. The system becomes less sensitive to high-frequency noise
        ব্যাখ্যা

        Explanation:
        When the derivative term is added to a PID (Proportional-Integral-Derivative) controller, it acts as a predictor. The derivative term is based on the rate of change of the error, meaning it responds to how fast the error is changing over time. This allows the system to anticipate future errors before they occur, which helps in improving the system's response time and reducing overshoot.

        Why the Other Options Are Incorrect:
        ক) The system response becomes slower: This is incorrect. The derivative term generally helps the system respond faster by anticipating changes in error, leading to quicker corrections.
        গ) The steady-state error increases: This is incorrect. The derivative term does not directly affect steady-state error. Steady-state error is mainly influenced by the integral term, which accumulates the error over time.
        ঘ) The system becomes less sensitive to high-frequency noise: This is also incorrect. The derivative term can actually make the system more sensitive to high-frequency noise because it amplifies fast changes in error. High-frequency noise can cause rapid fluctuations in the derivative term, potentially leading to instability.

        ১৮৫.
        Which of the following is a disadvantage of using an integral controller?
        1. It introduces steady-state error
        2. It can cause windup
        3. It improves system stability
        4. It reduces system response time
        ব্যাখ্যা

        Explanation:
        The integral controller in a PID controller accumulates the error over time, and this accumulation helps eliminate steady-state error. However, one of the main disadvantages of using an integral controller is windup.

        Windup occurs when the integral term accumulates a large error during periods of large deviation from the setpoint (e.g., during a transient phase or when the controller output is saturated). This can lead to an overshoot or delayed response once the error is corrected, making the system slower to stabilize.

        Why the Other Options Are Incorrect:
        ক) It introduces steady-state error: This is incorrect. The purpose of the integral controller is actually to eliminate steady-state error by accumulating the error over time and ensuring that the output eventually matches the setpoint.
        গ) It improves system stability: This is incorrect. While the integral controller helps with steady-state accuracy, it can actually reduce stability if not tuned properly, as the accumulation of error can cause overshoot and oscillations (especially in systems with high gain).
        ঘ) It reduces system response time: This is incorrect. The integral action can actually increase the response time because it takes time for the integral term to accumulate enough error to drive the system back to the setpoint. In some cases, it can cause the system to overcompensate.

        ১৮৬.
        What is the purpose of a compensator in control systems?
        1. To adjust the system gain
        2. To modify the system dynamics for desired performance
        3. To eliminate system poles
        4. To reduce feedback signal noise
        ব্যাখ্যা

        Explanation:
        A compensator is used in control systems to modify the system's dynamics to achieve a desired performance. It can be designed to improve stability, transient response, steady-state error, or to meet other design specifications. By adjusting the poles and zeros of the system, a compensator can modify how the system responds to inputs, allowing engineers to meet specific performance criteria (such as reducing overshoot, settling time, or steady-state error).

        Why the Other Options Are Incorrect:
        ক) To adjust the system gain: While compensators may affect the system gain in some cases, their primary purpose is to shape the system’s response, not just adjust gain. Gain adjustment alone doesn't modify the dynamics in a way that compensators do.
        গ) To eliminate system poles: This is incorrect. A compensator may modify the location of the poles, but it does not eliminate them. In fact, it often introduces additional poles and zeros to change the system’s dynamics.
        ঘ) To reduce feedback signal noise: While compensators might indirectly improve system performance under noisy conditions, their primary purpose is to modify the system's response for improved performance, not specifically to reduce noise.

        ১৮৭.
        What is the main advantage of using a state-space representation in control systems?
        1. It provides a simple transfer function for analysis
        2. It can model multivariable systems
        3. It only works for linear systems
        4. It reduces computational complexity
        ব্যাখ্যা

        Explanation:
        State-space representation is a powerful tool in control systems because it allows for the modeling of multivariable systems, where multiple inputs and multiple outputs (MIMO systems) are involved. Unlike transfer function representations, which are more suitable for single-input, single-output (SISO) systems, state-space can handle complex interactions between various inputs and outputs.

        Why the Other Options Are Incorrect:
        ক) It provides a simple transfer function for analysis: This is not the main advantage of state-space representation. State-space is often used because it provides a more generalized form of modeling, especially for multivariable systems, and doesn't rely on a transfer function. In fact, deriving the transfer function from state-space representation may not always be simple.
        গ) It only works for linear systems: While state-space representation is commonly used for linear systems, it can also be extended to nonlinear systems. However, the analysis becomes more complex for nonlinear systems. The main advantage of state-space is its ability to model both linear and nonlinear systems, but it is typically more straightforward for linear systems.
        ঘ) It reduces computational complexity: State-space representation does not necessarily reduce computational complexity. In fact, for certain problems, it may involve more complex mathematical operations compared to simpler transfer function-based analysis. The advantage lies in its ability to model more complex systems rather than reducing computation.